







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterDoor Installation Near Me in Mesquite, TX: Fix the Opening Before You Hang the Door
If you’re searching “door installation near me” in Mesquite, here’s what you need to know first: in homes built before 1985, a new door hung in an out-of-square opening will stick, drag, or gap within months, no matter how good the door. The real job is squaring the rough opening, resetting the threshold, and flashing the sill before the new unit goes in. Groundwork Construction Co. of Mesquite does that work, and you can reach a live person at (888) 426-8078 any hour to get it scheduled.

Why Mesquite Doors Fail (And Why a New Door Alone Won’t Fix It)
Mesquite sits on expansive black clay, and that clay does not sit still. It swells through a wet spring, shrinks hard in a dry August, and pulls the slab with it. On a 1960s ranch off Galloway or a brick-veneer tract home near Town East, decades of that wet-dry cycle add up to differential foundation movement. The frame racks slightly out of plumb. The door opening goes parallelogram-shaped by a quarter inch or more.
Homeowners read that as a door problem. It usually isn’t. The door is just the messenger.
Hang a factory-square door in a racked opening and you’ve built in the same failure. It latches in March. By September the top corner gaps and the deadbolt won’t throw. So before any new unit goes in, we check plumb and square on the jamb, level across the threshold, and look at how the header sits. If the opening needs correction, we correct it. Then we hang the door.
That’s true for Windows & Doors work of every kind. It’s especially true for entry and patio doors, where weight and daily traffic punish a bad install fastest.
The North Texas Weatherization Details Most Installers Skip
A door that looks right can still leak air, water, and money. Mesquite’s temperature swings – 100°F+ summer afternoons, occasional hard freezes in January, and driving spring storms off I-30 – are brutal on door assemblies. These three details separate a real install from a hanging job:
- Thermal-break threshold. An aluminum threshold without a thermal break becomes a direct heat path. In July you can feel it radiating. A thermal-broken threshold with a proper adjustable riser keeps the seal tight and stops the conduction.
- Compression weatherstripping rated for 100°F+. Cheap foam or low-grade bulb seals take a set in North Texas heat and stop springing back. Compression seals held in a kerf keep contact through the temperature range.
- Sill pan flashing. Water at the threshold is the number one cause of rotted subfloor under an exterior door. A sill pan sheds it out and away instead of letting it sit against the framing.
We lean on hardware and door partners we trust for this work – Andersen and Marvin for the units, and weatherization components spec’d for the climate rather than whatever’s on the shelf. The goal is a door that seals tight on the day it’s hung and still seals tight through two hard summers. Built to last, backed in writing.

Common Door Scenarios We See Across Mesquite
Most of what we do here fits a handful of patterns. If any of these sound familiar, the fix is usually straightforward once the opening is addressed.
- The sticky back door in an older ranch. Built in the ’60s or ’70s, the rear entry has taken the most sun and the most soil movement. It drags at the bottom or won’t latch. We square the opening, reset the threshold, and hang a properly flashed exterior door.
- The patio door that fogs and won’t slide. Failed seals and a tracked-in slope. We replace the unit and confirm the sill drains away from the house, not toward it.
- The front entry that leaks at the corner. Missing or failed sill pan. Water gets behind the threshold and softens the subfloor. We open it up, flash it right, and reset the door.
- The interior door that rubs after a foundation repair. The repair moved the slab back, but nobody re-fit the doors. We adjust jambs and hang doors that actually close.
Because Mesquite is a built-out, post-war inner-ring suburb, nearly all of this work is replacement inside mature housing stock – not new construction. That means we’re almost always working within existing rough openings in homes that have already moved. Knowing that going in saves surprises later.
Who’s Coming Into Your Home Matters
Door installation means interior access. A crew spends hours inside your house, moving through hallways and working around your things. You deserve to know exactly who’s doing that – not just the name on the side of a truck.
Every Groundwork technician is background-checked and arrives in uniform. Our technicians have up to 12 years of experience with door and frame work. When a project needs a specific brand or system, we bring in the right partners rather than improvising – and we schedule the work so you know who’s showing up and when. Transparent, no surprises.
What Door Installation Costs in Mesquite
Upfront pricing is the whole point. Here’s what door work runs in this market. The number you see is the number you pay.
| Scope | Typical Range |
|---|---|
| Exterior entry door, standard | $800 - $2,400 |
| Premium entry door (Andersen / Marvin) | $2,000 - $5,500 |
| Patio / sliding door replacement | $2,200 - $6,000 |
| Interior door, hang and adjust | $300 - $650 |
| Rough opening correction (out-of-square jamb) | $600 - $2,000 |
| Sill pan flashing and threshold rebuild | $350 - $900 |
Those are ranges, not quotes. A home with a badly racked opening on a moving slab sits at the top of the correction range; a single interior door in a square jamb sits at the bottom. We give you the exact number before work starts, and standing promotions apply – $1,000 off projects over $10,000, a free project estimate and design consult, and 0% financing for 18 months. For a larger exterior overhaul, that financing keeps a full door-and-window package within reach.
If a Door Won’t Lock, That’s Not a Monday Problem
A door that won’t latch or lock after installation is a security gap, not an inconvenience. It’s the difference between a home that’s sealed and one that isn’t. So we don’t run a voicemail line that opens at 8 a.m. Monday. Calls are answered by a live person, 24/7, and we can get a technician out to address a failed latch, a misaligned strike, or a door that won’t secure the same day.
Every install is covered by the 730-Day Done Right Promise. If your door shifts, sticks, or stops sealing within two years of installation, we come back and make it right. No escalating, no negotiating, no fine print to argue over. That’s one of the longest workmanship guarantees in residential construction, and it’s the reason we can offer it: we correct the opening before we hang the door, so the door stays where we put it.
FAQs
A standard exterior entry door installed typically runs $800 to $2,400 in Mesquite, while a premium Andersen or Marvin unit can run $2,000 to $5,500 once you account for the door, hardware, flashing, and any rough-opening correction. If your jamb is racked from clay-soil movement, the correction adds $600 to $2,000 – that’s the part most budget installers leave out. Call (888) 426-8078 for an exact quote; estimates are free.
Sometimes. If the slab has moved enough to rack multiple openings, a foundation re-level may come before door work, and we’ll tell you honestly if that’s the case. If the movement is mild and localized, we can square the affected opening and hang the new door now. We check plumb and level on the jamb and threshold and let the readings decide – not a sales pitch.
For a standard exterior or interior door with a sound opening, most jobs are completed in a single visit. Complex corrections, patio-door replacements, or sill-pan rebuilds may take a bit longer. Because a live person answers at (888) 426-8078 around the clock, we can often schedule a same-day dispatch when a door won’t lock or secure. Call and we’ll tell you what’s realistic for your door.
A proper install should always include a thermal-break threshold, compression weatherstripping rated for 100°F+, and a sill pan flashing beneath the unit – the details that decide whether a door seals through a North Texas summer or leaks into the subfloor within a year. If a contractor’s bid doesn’t mention flashing or the threshold spec, ask. Call (888) 426-8078 to see how we handle it.
Get Your Doors Done Right
If your Mesquite home’s doors are sticking, dragging, or leaving gaps, we fix the opening and hang the door so it stays fixed. Free estimate, upfront pricing, the 730-Day Done Right Promise, and a live person on the line any hour. Call (888) 426-8078 for your free estimate, or visit our home page to see how we work, and check our Mesquite service area to confirm we cover your neighborhood.
Written by the team at Groundwork Construction Co. of Mesquite, serving Mesquite, TX.
What Our Customers Say
"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong












