







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Mesquite, TX
Cabinet refacing in Mesquite typically runs $6,500 to $14,000 for a standard 20- to 25-foot kitchen, while full cabinet replacement with new boxes and doors usually lands between $12,000 and $28,000 depending on layout, materials, and whether you’re moving plumbing or electrical. Cabinet refacing keeps your existing cabinet boxes and swaps out the doors, drawer fronts, veneer, and hardware. Cabinet installation replaces the boxes themselves and lets you change the entire layout. We do both, and we tell you straight which one your kitchen actually needs.
Mesquite kitchens run the spectrum. The older ranches and 1970s splits off Pioneer Road and Belt Line often have solid ¾-inch plywood boxes that hold up beautifully through a refacing job, while the newer builds near the Mesquite Championship Rodeo and along I-635 frequently have particleboard boxes with thermofoil doors that peel and delaminate within a decade. We’ve walked hundreds of kitchens throughout Mesquite, and the recommendation almost always comes down to what’s behind the doors, not what’s on them.
Groundwork Construction Co. of Mesquite handles Kitchen Remodeling as a full-scope service, and cabinets are usually the single largest line item in a kitchen budget. Whether you want to reface a solid set of boxes and save thousands, or tear out and start fresh, we give you upfront pricing, no surprises, and back the work with our 730-Day Done Right Promise. Call (888) 426-8078 and a live person will pick up, any hour of the day.

When You Need Cabinet Installation & Refacing
Most homeowners wait too long. Here are the scenarios that bring people to us for cabinets in Mesquite:
- Your doors are peeling, warping, or delaminating. Thermofoil doors from the 1990s and 2000s builds are notorious for bubbling along the edges. Once moisture gets under that plastic film, it’s not coming back. If the boxes are still square and solid, refacing saves you the cost of tearing everything out.
- Your layout doesn’t work anymore. The microwave blocks the sink. The corner cabinet has a 4-foot dead zone. The refrigerator door won’t open all the way. In a full installation we can relocate the boxes entirely and fix the flow.
- You’re replacing countertops. If you’re putting in Silestone or Caesarstone, you’ll want the cabinet heights and levels checked first. A new slab on top of sagging or out-of-level boxes will crack or look wrong. Cabinet work should happen before counters, not after.
- Water damage or pest damage. North Texas humidity and the occasional slab leak can rot out the cabinet base under the sink. We’ve opened plenty of cabinets in Mesquite where the particleboard has swollen and the bottom shelf is crumbling.
- You’re prepping to sell. Buyers notice cabinets first. A refaced kitchen with new doors and hardware reads as “updated” without the full remodel cost, and it moves a listing faster in the $250K to $350K band typical across most Mesquite neighborhoods.
- You’re combining a kitchen refresh with other projects. If you’re also looking at bathroom remodeling or exterior work, we can schedule the trades together and save on mobilization costs.
Our Cabinet Installation & Refacing Process
Here’s exactly how a cabinet project with us runs, from first call to final walkthrough:
- Free in-home consultation and measurement. We come out, measure the footprint, check box integrity, examine the toe kicks, look at plumbing and gas shutoffs, and photograph everything. No obligation, no pressure. If refacing will serve you better than replacement, we say so, even though it’s a smaller invoice for us.
- Design and material selection. We walk you through door styles, wood species, finishes, and hardware alongside your countertop choice. If you’re considering Kohler fixtures or a Moen faucet, we plan the cabinet integration around them so the countertop cutouts and cabinet clearances all line up. We work with KraftMaid and other top-tier brands, and you get to see samples in your actual kitchen light, not under showroom fluorescents.
- Written proposal with upfront pricing. Every line item is spelled out: demo, new boxes or veneer, doors, drawer fronts, hardware, installation, disposal, and any plumbing or electrical adjustments. The number you see is the number you pay. We also apply the $1,000 off project credit for jobs over $10,000 and offer 0% financing for 18 months so the budget works.
- Demo and prep, done carefully. We lay protective covering, remove the old cabinets and doors, patch, and level. If your floors need attention underneath, we flag it before proceeding rather than after the new boxes go in.
- Installation. New boxes go in plumb and level with shims and proper fasteners into studs. Refacing gets new veneer on the exposed frames, new doors and drawer fronts, new hardware, and new toe kick. Background-checked, uniformed technicians do the work, and our team brings up to 12 years of hands-on experience to each install.
- Final walkthrough and signoff. We open every door, pull every drawer, check alignment and reveal lines, and walk you through what to expect on settling and care. Any punch-list item we own is covered under the 730-Day Done Right Promise.

Cabinet Installation & Refacing Pricing in Mesquite
Cabinet pricing in Mesquite runs lower than what you’d pay inside the Dallas loop, but not by as much as the internet leads you to believe. Here are the honest ranges we quote for a typical 20- to 25-foot kitchen with standard L-layout and no major layout changes:
Line-Item Pricing Ranges
| Scope | Typical Range | What’s Included |
|---|---|---|
| Cabinet refacing (standard size kitchen) | $6,500 – $14,000 | Doors, drawer fronts, veneer, hardware, toe kick, labor |
| Cabinet refacing with custom or premium door styles | $10,000 – $18,000 | Above plus upgraded wood species or custom sizes |
| Full cabinet replacement with stock or semi-custom boxes | $12,000 – $28,000 | New boxes, doors, drawer fronts, hardware, install, disposal |
| Full replacement with custom and layout changes | $22,000 – $45,000 | Above plus re-engineered layout, electrical, plumbing relocations |
| Island cabinet install (add-on) | $2,500 – $6,500 | Box build, install, toe kick, hardware, countertop allowance |
| Door and drawer-front replacement only | $3,500 – $8,500 | Doors, fronts, hinges, hardware |
What Affects Cabinet Cost in Mesquite
- Box condition. If your boxes are solid, refacing saves you 40 to 60 percent of the cost of replacement. If they’re swollen, soft, or out of square, replacement is the honest answer.
- Material grade. Plywood boxes outlast particleboard, and full-plywood construction adds $40 to $100 per linear foot on a custom set.
- Layout changes. Moving a sink or range means plumbing and gas line work. Relocating an outlet to accommodate a new cabinet run adds electrical cost.
- Countertop coordination. If you’re pairing cabinets with quartz, Mesquite installs of Caesarstone or Silestone typically add $50 to $120 per square foot slab cost, templated after the base cabinets are set.
- Hardware and finish. Soft-close hinges and premium pulls add $400 to $1,500 across a full kitchen. That’s almost always worth the money.
Every quote includes a free in-home measure and written scope. The Free Project Estimate & Design Consult offer applies, so there’s no charge to have us out. Call (888) 426-8078 for your exact number.
Cabinet Installation & Refacing FAQs
Is cabinet refacing cheaper than replacement in Mesquite?
Yes, refacing usually costs 40 to 60 percent less than replacement. For a Mesquite kitchen with solid boxes, refacing at $6,500 to $14,000 avoids the $12,000 to $28,000 range of a full replacement. The catch is that refacing only makes sense when the boxes are structurally sound. If your boxes have water damage or are out of square, we’ll tell you to replace. Call (888) 426-8078 for a free in-home assessment; there’s no charge and no pressure either way.
How long does a cabinet project take in Mesquite?
Most refacing projects take 2 to 4 days; a full cabinet replacement typically runs 5 to 10 business days. Custom door finishes can add a week of lead time. We give you a written schedule before we start and stick to it, and we set up a temporary kitchen space during the project so you’re not eating out for two weeks straight.
Do you coordinate cabinets with countertops and plumbing?
Yes, cabinet work is scheduled before countertop templating so your new counters fit the base cabinets precisely. If you’re adding a Kohler sink or Moen faucet, we plan the cabinet cutouts around them. That coordination is one reason we handle Kitchen Remodeling in Mesquite as a single-contractor job instead of piecing it out across three vendors.
Should I install cabinets myself, or hire a pro?
Cabinet installation is not a hobby project if you’re changing the layout. Improperly fastened boxes will pull away from the wall, and misaligned boxes will wreck the countertop and void the warranty on your appliances. Our background-checked technicians handle the fastening, shimming, leveling, and finish work in a single coordinated effort. Call (888) 426-8078 and we’ll quote the job in one visit.
Why Homeowners in Mesquite Choose Groundwork
We’ve been building and remodeling across local communities since 2014, and cabinets are one of those jobs where the difference between a good install and a bad one shows up two years later when a door sags or a drawer front separates from the box. Our 730-Day Done Right Promise exists because we know you’ll live with these cabinets for a decade or more. If something fails, we make it right. That’s one of the longest workmanship guarantees in residential construction and it applies to every cabinet job we do.
Calls come in to a live person, 24 hours a day, 7 days a week. No voicemail, no Monday morning callback, no “we’ll have someone reach out.” Every technician is background-checked and arrives in uniform. We also handle window replacement, roofing, and home additions when your Mesquite project spans more than one room. From foundation to finish line, one contractor, one point of contact, one written promise.
Ready to see what your kitchen cabinets can become? Call (888) 426-8078 for your free estimate and design consult. Upfront pricing, $1,000 off projects over $10,000, and 0% financing for 18 months are all available on qualifying jobs. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Mesquite, serving Mesquite.


