







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Mesquite Homeowners Choose Belgard Construction
We provide independent Belgard construction service in Mesquite, which means we install and repair Belgard pavers and wall systems without being tied to any manufacturer’s sales targets. That independence matters when you’re deciding whether a Belgard hardscape should be repaired or rebuilt, because you get an honest assessment instead of an upsell. We’re an independent hardscape contractor, not a Belgard dealer, and we work with these products daily. Our technicians bring up to 12 years of experience to every job, backed by the 730-Day Done Right Promise and upfront pricing that tells you the number before the work starts. Call (888) 426-8078.
Why Trust Groundwork Construction Co. of Mesquite for Your Belgard Construction?
Belgard pavers and wall blocks have specific behaviors in North Texas conditions that only show up after a season or two in the ground. Our technicians know them. We can tell the difference between efflorescence that’s a cosmetic surface deposit on Catalina Grana and a failing base that’s letting water sit beneath the pavers, and those two problems call for completely different fixes. For color-critical repairs, we source genuine Belgard replacement pavers and wall blocks so the new pieces match the old. For base materials, bedding sand, and joint sand, we use quality aftermarket products that meet ASTM standards, which keeps the cost sane without sacrificing performance. Every repair and installation we do is warranty-safe: we work in a way that doesn’t void your original Belgard coverage where it applies. Most important, we tell you plainly when a hardscape is worth repairing and when it needs to be rebuilt.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Mesquite
Belgard hardscapes in Mesquite face the same pressure: expansive clay soil that moves with every wet-dry cycle, full summer sun, and heavy spring rain. Here’s what we see, and why it happens.
- Efflorescence on Catalina Grana pavers. That white, chalky film on the paver surface is salt drawn up by moisture moving through the material. In Mesquite’s clay soils, water that can’t drain properly cycles through the pavers and brings the salts with it. Cleaning removes the visible residue, but if it keeps returning, the real problem is drainage or base saturation underneath.
- Edge spalling on Urbana pavers. Urbana pavers tend to chip and spall at the edges where the bedding sand has washed out after a heavy rain. Once sand is gone, the paver loses its support and the foot traffic on top breaks the unsupported edge. Re-establishing the sand layer and edge restraint stops the cascade.
- Wall block separation in Weston Stone installations. Weston Stone walls separate and lean when the installation lacks proper geogrid reinforcement. Mesquite’s clay pushes back against any retaining wall seasonally, and a wall built without grid layers tied back into the soil will start to bow within a few wet-dry cycles.
- Color fading and surface pitting on Mega Arbel pavers. Mega Arbel pavers in full Texas sun take UV exposure most of the year. Over time the surface can fade and develop pitting, especially on driveways with no shade. This one is as much about sun angle and exposure as material quality.
- Base settlement across all Belgard lines. Loose pavers that rock when you walk on them almost always trace back to inadequate base compaction in expansive clay. No amount of surface patching fixes a moving base; the pavers come up and the base gets rebuilt.
Belgard Parts & Our Repair-vs-Replace Approach
We don’t claim to keep Belgard stock on hand. What we do is source the right materials for each job. When color matching is critical, particularly on an older Catalina Grana or Urbana installation, we source genuine Belgard replacement pavers and wall blocks so the repair blends with what’s already there. For base aggregate, geotextile, bedding sand, and polymeric joint sand, we use quality aftermarket products that meet ASTM standards. The honest part comes down to this: a resettled paver section over a sound base is a repair, but pavers rocking across a driveway with failing drainage are a rebuild, and we’ll tell you which one you need. We give you a written line-item quote either way, and the price doesn’t move once work starts. Call (888) 426-8078 to set up a free estimate.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We walk the hardscape and find the actual source of the problem, whether that’s efflorescence from poor drainage, edge spalling from washed-out bedding sand, or a wall separating because it lacks geogrid. We check base condition and grade, not just surface appearance.
- 2
Repair or install. For repairs, we remove only the affected pavers, re-establish a properly compacted base with geotextile separation where needed, and re-lay. For new Belgard installations like a paver driveway or patio, we build the base to handle Mesquite’s clay movement before a single paver goes down.
- 3
Test. We check drainage by running water across the finished surface to confirm it sheds away from the house and off the pavers. We check paver stability on foot and look for any rocking or edge movement.
- 4
Warranty. Polymeric joint sand goes in last, then we do a final walkthrough with you. Every job is covered by the 730-Day Done Right Promise, so if it isn’t right, we make it right.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Mesquite
We work across the Belgard lines Mesquite homeowners actually have in their yards and driveways. That includes Catalina Grana and Urbana pavers for driveways, patios, and walkways, Mega Arbel pavers for larger-format driveway surfaces, and Weston Stone wall blocks for retaining walls and garden walls. Whether it’s a repair on an existing installation or a fresh paver driveway or patio, we handle the base prep, laying, drainage, and joint sand as one job. If your installation uses a series we haven’t listed, call and describe it; chances are we’ve worked with it.
We Also Service These Brands
Belgard is one brand in a much bigger picture. We also work with KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows, along with a curated set of other partners across every trade. That matters because a hardscape job often touches the wider house, and one contractor who knows the whole scope is easier to work with than three who don’t talk to each other. From foundation to finish line, we cover it.
FAQs – Belgard Construction Service in Mesquite

Is Groundwork Construction Co. of Mesquite authorized by Belgard? No. We are an independent hardscape contractor and are not affiliated with or authorized by Belgard. We install and repair Belgard products and source genuine Belgard material when color matching matters, but we’re not a Belgard dealer and we don’t answer to their sales targets when we recommend a repair or a rebuild.
Do you use genuine Belgard/OEM parts? Yes, where color matching is critical. For replacement pavers and wall blocks we source genuine Belgard material so the repair blends with your existing Catalina Grana, Urbana, Mega Arbel, or Weston Stone installation. For base aggregate, geotextile, bedding sand, and polymeric joint sand, we use quality aftermarket products that meet ASTM standards. Call (888) 426-8078 to talk through what your job needs.
How long does Belgard service take? A focused repair, like resetting a section of loose pavers or re-establishing washed-out bedding sand, usually runs a day or two. A full paver driveway or patio installation takes longer because the base has to be built and compacted properly over Mesquite’s clay before any pavers go down, and rushing that step is exactly what causes the failures we get called to fix. Call (888) 426-8078 for a timeline based on your specific job.
What Belgard models/series do you cover? We work with Catalina Grana, Urbana, Mega Arbel, and Weston Stone, along with other Belgard lines as they come up. If you have a series not on that list, describe it to us and we’ll tell you straight whether we can service it.
Will service void my Belgard warranty? We work in a way that’s warranty-safe and won’t void your original Belgard coverage where it applies to the material itself. Manufacturer warranties cover product defects, not installation or base failures, so it’s worth understanding which side of that line your issue falls on. We’ll walk you through it before any work begins. Call (888) 426-8078.
How much does Belgard construction cost in Mesquite? Here are the ranges we work with, priced for this market.
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Call (888) 426-8078 for an exact quote on your project. Estimates are free.
Book Your Belgard Service in Mesquite, TX
Whether your Belgard Catalina Grana pavers are loose, your Weston Stone wall is separating, or you’re ready for a new paver driveway or patio, we’ll give you a straight assessment and a written line-item quote. Calls are answered by a live person 24/7, estimates are free, and every job is backed by the 730-Day Done Right Promise. Call (888) 426-8078 to book your Belgard service in Mesquite.
Written by the team at Groundwork Construction Co. of Mesquite.












