







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Mesquite, TX: What They Cost and How the Job Runs
Custom & geometric windows in Mesquite typically run $6,500 to $22,000 for a whole-house package of arches, trapezoids, circles and angled units, and a typical four-to-six week job from template to final trim-out. Most ranches and brick-veneer tract homes here get three to seven shaped units, usually a half-round over a front door, a pair of arch-tops, and one angled window tucked into a stair or gable wall. Call (888) 426-8078 and we’ll walk your openings and give you a written, line-item number before anyone touches a wall.
How a Custom & Geometric Window Job Actually Runs, Stage by Stage

Shaped glass isn’t a shelf item, so this job is as much scheduling as it is carpentry. Here’s the honest sequence.
Stage 1: Template and field measure (day 1, two to three hours)
We don’t order off a photo. Each opening gets measured in person, and any arch or angled unit gets a physical template or a digital profile of the actual rough opening. You decide the material, the glass package (low-E, tempered if it’s within 18 inches of a floor or beside a door), and the grille pattern at this visit. This is the point of no return on shape and finish, so it’s worth slowing down.
Stage 2: Fabrication (three to five weeks, out of your hands)
Shaped units are built to order. A half-round or eyebrow window can run three weeks; a trapezoid or a true radius arch inside a gable often runs four to five. We confirm the ship date in writing and schedule the install crew behind it, so you’re not sitting with a hole in the wall waiting on a truck.
Stage 3: Demo and rough framing (day 1 of install, one to two days)
Old units come out, and the opening gets squared and reframed to the new template. On a brick-veneer house, that means careful brick removal and a proper flashing detail so the wall sheds water the way it was designed to. Framing corrections are common in 1960s tract homes and we’ll tell you up front if we find rot or a header that needs attention.
Stage 4: Set, flash, and seal (day 2 to 3)
Units go in level and plumb, get shimmed correctly, and get flashed and sealed at the sill and head. This is the part nobody sees and the part that decides whether you have a leak in two summers. We check operation on every operable panel before we close anything up.
Stage 5: Trim, finish, and walkthrough (day 3 to 5)
Interior casing, brickmold or sill returns, caulk, and paint touch-up. Then a walkthrough where we open and close every unit with you and hand over the documentation. The whole install is covered by our 730-Day Done Right Promise: if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Shaped Windows
- Wood-clad vs. all-vinyl vs. fiberglass frames. Wood-clad (Andersen and Marvin both make shaped units) takes paint and stain beautifully and holds up well, but it’s the top of the price range. All-vinyl is the value play, though true radius and trapezoid shapes are limited in vinyl. Fiberglass sits in the middle and handles heat well.
- Fixed vs. operable. Most geometric units are fixed glass, which keeps cost and leak risk down. An operable arch or awning adds hardware cost and a little maintenance, and it’s rarely worth it on a gable.
- Grille and divided-light patterns. A simple perimeter grille keeps the shape readable from the street. Dense colonial grids on a half-round can look busy on a low ranch facade. This is a design call, and we’ll show you samples.
- Glass package. Low-E and argon are worth it in North Texas heat. Tempered glass is required in specific spots, so we build that into the quote rather than adding it later.
- Trim and surround. Brickmold, a brick soldier course, or a simple sill return all change the exterior look and the labor line.
What Custom & Geometric Windows Cost in Mesquite, TX

Plan on $6,500 to $22,000 for a package of shaped units, with a single arch-top running roughly $1,200 to $3,500 installed and a large radius or trapezoid unit at the higher end. Five things push a job toward the top of that range:
- Shape complexity. A half-round is straightforward. A true radius arch, an eyebrow, or an angled trapezoid needs custom fabrication and costs more per unit.
- Opening condition. Rotten framing, out-of-square rough openings, or a header that needs work adds labor. Brick-veneer removal and rebuild adds more.
- Material grade. Wood-clad and premium fiberglass cost more than vinyl, and both take finish work.
- Glass specs. Low-E, tempered, and specialty coatings add to each unit.
- Scope and permit. A one-unit swap is a small job. Changing the size of an opening or adding a new one touches structure and triggers a permit and inspection.
Your written estimate lists each unit, the glass spec, the trim, the labor, and the permit line separately, so you can see exactly what you’re paying for. What it won’t cover: hidden rot or framing damage discovered after demo, which we price as a change order before we proceed, never after. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Mesquite Homes Specifically Do to This Job
Mesquite is a built-out, post-war inner-ring suburb, so almost all of this work is replacement and renovation rather than new construction. The housing stock is dominated by 1950s to 1970s single-family ranches and brick-veneer tract homes, many now 50-plus years old, which means the rough openings are rarely square and the original framing has had decades to move. On top of that, the expansive black clay soil under Mesquite swells and shrinks with every wet-dry cycle, and that constant shifting is a leading cause of foundation movement that racks wall openings out of square over time. We see it most in the older ranch pockets and along the established neighborhoods off the I-30 and 635 corridors. North Texas heat and spring hail also beat on these facades, so when we set a shaped unit we flash and seal it properly the first time. If the wider project grows into more of the envelope, that’s part of a full Windows & Doors in Mesquite scope, and homeowners often pair exterior work like this with Concrete Driveways & Concrete Work in Mesquite or Asphalt Driveways & Resurfacing in Mesquite while the crew is already on site. We cover the whole of Mesquite and the surrounding area, and you can see our broader Windows & Doors service for the full range of units we install.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Mesquite

Plan on four to six weeks total, with three to five of those weeks spent in fabrication while the shaped units are built to your template. The install itself usually takes three to five working days. Call (888) 426-8078 for a schedule based on your specific units.
You do if the job changes the size of an opening or adds a new one. A straight like-for-like replacement in the same opening typically doesn’t require one. We pull the permit and handle the inspection when the scope calls for it, and we’ll tell you which side of that line your job falls on.
Usually yes. Most geometric units go into existing openings or gable walls with only minor framing, so plumbing and structure stay put. If a new opening needs a header or load path, we flag it in the estimate before work starts.
Most packages land between $6,500 and $22,000 depending on the number and complexity of shapes, the frame material, and the condition of the openings. Call (888) 426-8078 for an exact quote. Estimates are free and line-item.
Every install is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we make it right. Manufacturer coverage on the units themselves runs separately and we hand you the paperwork.
Get a Free Estimate on Custom & Geometric Windows in Mesquite
If you’re weighing shaped windows for a Mesquite ranch or brick-veneer home, the next step is a free on-site estimate. Call (888) 426-8078 and a live person answers, day or night. We’ll measure your openings, talk through shapes and materials, and leave you with a written line-item quote and a realistic timeline. No pressure, no vague bids: the number you see is the number you pay.
Written by the team at Groundwork Construction Co.












