







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Sunnyvale, TX: What It Costs and How Long It Takes
Most chain link fence jobs on a Sunnyvale residential lot run $3,500 – $9,000, and a straightforward 150- to 200-foot run along a property line is usually a two-day job once the materials are on site. Day one is layout, digging, and setting posts in concrete; day two is rails, mesh, tensioning, and gates. Call (888) 426-8078 and we’ll walk your fence line with you and put a written, line-item number in your hands.
How a Chain Link Fence Goes In, Stage by Stage

A chain link fence looks simple from the street. The work that determines whether it stays tight and plumb for the next 15 years happens before a single panel of mesh goes up, and that sequence is the same on every job we run.
Stage 1: Walk the line and call for locates (day 1)
We meet you on site and walk the proposed fence line, marking corners, gate openings, and any spot where the run has to jog around a tree, a septic field, or an existing utility easement. You decide the layout and gate placement here, because moving a gate later means digging out a set post. Before anyone puts a shovel in the ground we call 811 for utility locates. On Sunnyvale acreage lots with outbuildings or a shop, that step matters more than most homeowners expect, because private lines to a barn or well house don’t always show up where you’d guess.
Stage 2: Permits and HOA approval (1 – 2 weeks, often the longest wait)
Sunnyvale runs its own permitting and inspection schedule, and we pull the fence permit for you rather than handing you a packet to figure out. If your property sits inside a deed-restricted section, you’ll also need written HOA approval on height, color, and setbacks before we order material. Getting that in hand early is the difference between a job that starts on schedule and one that stalls for a month. You make the calls on height (most residential runs top out at 4 to 6 feet) and whether you want a black or green vinyl coating versus plain galvanized.
Stage 3: Digging, setting, and curing posts (day 1 of construction)
Terminal posts, corner posts, and gate posts get dug to depth and set in concrete; line posts go in on 8- to 10-foot centers. Concrete needs to cure before you load it with tension, so this is a real stopping point, not a formality. On the expansive clay that runs under much of this part of Dallas County, post holes get belled at the bottom and set a little deeper than the minimum, because clay that swells in a wet spring and shrinks in a dry August will push a shallow post up and out over time. That single detail is why some fences here lean after three or four years and others don’t.
Stage 4: Rails, mesh, tension, and gates (day 2)
Top rail, tension bands, and mesh go up, then everything gets pulled tight and checked for plumb. Gate frames get hung and adjusted so they swing clean and latch without a lift. You confirm gate swing direction and latch height at this point. If you’re adding a double drive gate for equipment or trailer access, the posts for it are heavier and set in more concrete, so it needs to be in the plan from the start.
Stage 5: Final walk and cleanup (same day)
We walk the whole line with you, check every post for plumb and every gate for clearance, haul off the spoil and leftover material, and leave the yard the way we found it minus the fence. If anything isn’t right, the 730-Day Done Right Promise covers it: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Chain Link Fence
Chain link isn’t one product. The choices below are the ones that actually change how the fence looks, how long it lasts, and what it costs.
- Galvanized vs. vinyl-coated mesh. Bare galvanized steel is the budget choice and holds up fine, but it goes dull grey and reads industrial. A vinyl coating in black or green costs a bit more and looks far better against landscaping. For a front-yard run or anything visible from the street, the coating is usually worth it.
- Gauge and coating thickness. Mesh comes in different wire gauges, and heavier wire resists bending and sagging. A too-light mesh on a long run with a dog leaning on it will stretch. We’ll tell you which gauge fits your use rather than defaulting to the cheapest roll.
- Post weight and wall thickness. Gate and corner posts carry the most load and should be heavier than line posts. Skimping here is the most common reason a gate sags within a year or two.
- Height. Four feet keeps a dog in. Five feet is common for property lines. Six feet is the practical maximum for most residential runs and often needs HOA sign-off.
- Gate hardware and configuration. Walk gates, double drive gates, self-closing hinges, and latches all get specified here. A tension-band gate frame will outlast a cheaper clamp-on frame by years.
- Top rail and tension wire. A top rail keeps the mesh from sagging between posts. A bottom tension wire does the same job at the base, which matters more than people think on a run where dogs or kids push on the lower section.
- Finishing touches. Privacy slats, decorative post caps, and matching gate closers are all available if the goal is screening rather than pure function.
If the fence is one piece of a larger yard project, homeowners often pair this with Concrete Driveways & Concrete Work in Sunnyvale to tie the gate apron and a new approach together. That’s part of a full Fence Installation in Sunnyvale scope when other fence types are in the mix.
What a Chain Link Fence Costs in Sunnyvale, TX

Expect $3,500 – $9,000 for a residential chain link fence in Sunnyvale, with most jobs landing in the middle of that range. Five variables push a job toward the high end:
- Linear footage. The single biggest driver. A compact back-lot run sits near the bottom; a full perimeter around a large-lot property pushes toward the top.
- Terrain and slope. Rolling terrain means more posts, more concrete, and sometimes stepped panels. A flat run is cheaper to build than one that climbs a grade.
- Gates. Each gate adds posts, hardware, and labor. A double drive gate for a shop or trailer pad adds more than a walk gate.
- Material grade. Coated mesh and heavier posts and rails cost more up front and hold up longer. Galvanized is cheaper and shows its age sooner.
- Permit and HOA scope. A straightforward permit is baked into the estimate. Special conditions, like a run along a drainage easement, can add review time and cost.
Every written estimate is line-item and fixed: the number you see is the number you pay, with no change orders once work starts. It covers posts, concrete, rails, mesh, tension hardware, gates, permit, and cleanup. It does not cover utility relocation if a locate turns up something that has to move, or landscaping restoration if you’ve asked us to remove mature plantings along the line. We call those out before you sign, not after.
For bigger budgets, 0% financing for 18 months and $1,000 off projects over $10,000 make a full yard rebuild easier to plan. If the fence comes with a new drive or resurfaced approach, our Asphalt Driveways & Resurfacing in Sunnyvale work pairs naturally with it.
See the difference
Before
After
Before
After
Before
AfterWhat Sunnyvale Homes Specifically Do to This Job
Sunnyvale is a small, affluent town on the eastern edge of Dallas County, and the housing stock shapes this job in ways you won’t see a mile down the road in Mesquite or Garland. Most properties here are large single-family homes on sizable lots, with a meaningful share of custom and semi-custom builds out toward the rural edges. That means long fence lines and acreage runs alongside outbuildings and shops, not tight subdivision lots where a fence goes up in a few hours. A run that crosses a shop pad or a barndominium approach has to be planned around it.
The climate adds its own work. Hot, humid summers and heavy spring storm and hail seasons do a number on exterior materials, and expansive clay soils common to the region are the failure point most homeowners only discover after the first big rain. Posts set shallow in that clay will heave and the fence will lean. We set gate and corner posts deeper and bell the holes for that reason. And because Sunnyvale is its own small jurisdiction with its own permitting and inspection rhythm, getting the paperwork right means knowing the town’s process, which we do. Homeowners across Sunnyvale get the same line-item estimate and the same written guarantee.
Serving Sunnyvale, TX – Our Local Coverage Area
We serve Sunnyvale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Sunnyvale

Most residential chain link fences here are a two-day build once materials are on site, with day one for digging and setting posts and day two for rails, mesh, and gates. Add one to two weeks for the permit and HOA approval before work starts. Call (888) 426-8078 and we’ll give you a realistic schedule for your property, free.
Yes, the town requires a permit for a residential fence, and it also has its own setback and height rules you’ll want confirmed before you order material. We pull the permit for you and handle the inspection. Call (888) 426-8078 and we’ll tell you exactly what your property needs.
In most cases, yes. We call 811 for utility locates first, and if a line runs through the proposed path we adjust the layout to work around it rather than dig into it. Call (888) 426-8078 and we’ll walk the line with you and find the cleanest route.
Expect $3,500 – $9,000 for a residential chain link fence, depending on linear footage, terrain, gate count, and material grade. Coated mesh and heavier posts sit toward the top of that range; a compact galvanized run sits near the bottom. Call (888) 426-8078 for an exact quote. Estimates are free.
Every chain link fence we build is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That runs two full years on workmanship, which covers posts, tension, and gate alignment. Call (888) 426-8078 to schedule your free estimate.
Get a Free Chain Link Fence Estimate in Sunnyvale
We’ll walk your property line, confirm the layout and gate placement, and hand you a written line-item estimate for your chain link fence in Sunnyvale. No pressure, no vague bid. Call (888) 426-8078 and a live person answers, any hour, any day. We pull the permit, pass the inspection, and back the work in writing. Books, kitchens, a whole yard: from foundation to finish line, it’s the same team and the same Fence Installation standard. Call today for your free estimate.
Written by the team at Groundwork Construction Co.












