







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Seagoville, TX
Most concrete driveway work in Seagoville runs $4,500 to $12,000 for a new pour, and a full replacement typically lands between $5,000 and $14,000. A standard two-car drive takes two to three working days on site, plus a seven-day cure before you park on it. The number that matters here is not just square footage. It’s what the clay under the slab is doing, and whether the old concrete is sitting on it correctly. Call (888) 426-8078 for a free on-site estimate and a written line-item quote.
Quick answers for Seagoville homeowners
- New concrete driveway: $4,500 – $12,000
- Full replacement (demo + haul-off + new pour): $5,000 – $14,000
- Typical timeline: 2 – 3 days on site, 7 days to drive on it, 28 days to full strength
- What drives the price: slab thickness, reinforcement, base prep, access, and whether the county line puts you under Dallas or Kaufman inspection rules
What actually happens on a concrete job, start to finish

Concrete work rewards planning and punishes shortcuts. Here’s the real sequence we run on a Seagoville driveway, so you know what each day looks like and what you’ll be deciding along the way.
Stage 1: Site walk and layout (day 0, about an hour)
We walk the lot, check slope and drainage away from the house, and confirm where the existing utilities run. You decide the driveway width (10, 12, or 16 feet), the finish, and whether you want an apron or expansion joints at the garage. This is also where we flag whether your lot sits on the Dallas or Kaufman side of the line, because that changes which office reviews the work.
Stage 2: Demolition and haul-off (day 1, 4 – 6 hours)
Old concrete comes out with a skid-steer breaker and goes straight into a dumpster. On a replacement job this is the loud day, and you’ll want cars moved off the drive the night before. We also pull any tree roots that have lifted slabs, because pouring over them guarantees a repeat crack.
Stage 3: Base prep and grading (day 1 into day 2)
This is the stage most cheap bids skip. We excavate 4 – 6 inches, compact a crushed stone base, and grade it so water sheds toward the street or a drainage point. On Blackland clay, a properly compacted base is the difference between a slab that holds for decades and one that cracks in the first hard drought. You don’t have to make a decision here, but you should see this step happen.
Stage 4: Forming and reinforcement (day 2)
We set forms to the agreed layout and drop rebar or welded wire mesh at the right spacing. For a residential drive, 4-inch thickness with rebar is the working standard; heavier loads like an RV or a heavy truck push it to 5 – 6 inches. You confirm the layout one last time before the pour, because moving forms after the concrete is in is not a thing.
Stage 5: Pour, finish, and cure (day 3, plus a week)
The concrete goes in, gets screeded, floated, and finished to your chosen texture, then control joints are cut so cracks land where we want them. You stay off it for 24 hours and keep vehicles off for seven days. Full cure takes about 28 days, which is when it hits rated strength. We walk the finished slab with you and hand over care instructions in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Concrete is not one product. The choices below are the ones that actually change how your driveway looks and how long it lasts, and each has a real trade-off worth understanding before you commit.
- Standard broom finish ($4,500 – $9,000): The workhorse. Textured for grip, easy to maintain, and the most cost-effective per square foot. It suits most Seagoville homes and holds up well to North Texas heat.
- Exposed aggregate ($6,000 – $12,000): The top layer is washed to reveal the stone underneath, which hides surface wear and gives a warmer look. It’s harder to patch cleanly later if a section ever needs repair.
- Colored or stamped concrete (upper end of the $4,500 – $12,000 range and above): Integral color or a stamped pattern mimics stone or brick. It looks sharp on a curved drive, but it needs resealing every few years and shows chips more than plain concrete.
- Thickness and reinforcement: Standard is 4 inches with rebar; bump to 5 – 6 inches if you park anything heavier than a pickup. The upcharge is modest and worth it on a drive you plan to keep.
- Drainage and slope: French drains, channel drains, or a crowned slab keep water moving away from the foundation. On flat Seagoville lots this is often the single most important line item.
If your project grows into a broader hardscape plan, this work often sits inside a full Driveway & Pavers in Seagoville scope, and you can review our wider Driveway & Pavers service for the big picture.
What concrete driveways & concrete work costs in Seagoville, TX

A new concrete driveway in Seagoville runs $4,500 to $12,000, and a full replacement with demolition and haul-off runs $5,000 to $14,000. Those ranges cover most residential jobs. Here’s what pushes a project toward the low or high end:
- Square footage and width: A single-car drive sits near the bottom; a wide three-car or RV pad climbs toward the top.
- Existing slab condition: A clean removal is cheap. A slab heaved by clay, tied into old footings, or buried under landscaping adds demo and haul-off labor.
- Base and soil work: Correcting a failing subgrade on expansive Blackland clay, or adding drainage, adds cost but prevents the crack-and-heave cycle from repeating.
- Finish and thickness: Broom at 4 inches is the baseline; exposed aggregate, stamping, or a 6-inch slab for heavy loads move the number up.
- Permit scope: Which county reviews the work, and whether the job touches the right-of-way, affects permit and inspection time and cost.
Your written estimate spells out cubic yards, thickness, reinforcement, base depth, finish, drainage, and haul-off, so there are no blank lines. Upfront pricing, no surprises. What typically isn’t included and gets quoted separately: tree removal, utility relocation, new retaining walls, and any decorative lighting run under the slab. Call (888) 426-8078 for an exact quote, and estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Seagoville homes specifically do to this job
The single biggest factor in a Seagoville concrete job is the ground under it. This area sits on the Blackland Prairie’s expansive clay, and that clay swells when it’s wet and shrinks hard in drought. Slabs poured without a properly compacted base crack and heave within a few seasons, and the mid-century brick ranches along US 175 and the older core often have drives that were poured thin decades ago and show it now. The 1970s and 1980s frame homes in the same stretch tend to have narrow drives with tree-root lift, while the newer tract subdivisions on the east and south edges are usually dealing with first-generation slabs that settled because the fresh fill under them wasn’t compacted enough.
Then there’s the county line. Seagoville straddles the Dallas-Kaufman line, so permits and inspections can differ block to block depending on which side your lot falls on. A job that stays in one county gets a cleaner, faster approval path than a lot on the boundary. We check that before we quote, because it changes the schedule and sometimes the specs. We cover all of Seagoville and know which offices to call. This isn’t the same job we’d quote in a flat coastal market or on deep East Texas sand. The clay drives the plan.
Serving Seagoville, TX – Our Local Coverage Area
We serve Seagoville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – concrete driveways & concrete work in Seagoville

Two to three working days on site for a standard residential drive, plus seven days before you park on it and about 28 days to full strength. Replacements with heavy demolition can stretch an extra day. We give you a day-by-day schedule before we start. Call (888) 426-8078 to get that schedule for your lot.
Often yes, and which office reviews it depends on the county line. A driveway that touches the public right-of-way or a curb cut usually requires a permit, while some interior flatwork does not. We handle the paperwork and the inspection. Call (888) 426-8078 and we’ll confirm what your address needs.
Concrete will crack somewhere eventually, but a properly compacted base, right thickness, and control joints keep cracks where they belong and prevent heaving. Skipping base prep is why so many older Seagoville drives fail early. We build it to hold. Call (888) 426-8078 for an on-site look at your soil conditions.
$4,500 to $12,000 for a new pour, and $5,000 to $14,000 for a full replacement with demo and haul-off. Thickness, finish, drainage, and base work set where you land in that range. You get a written line-item quote before anything is scheduled. Call (888) 426-8078 for an exact number.
Every concrete job we do is covered by our 730-Day Done Right Promise. If the workmanship isn’t right, we make it right. That’s backed in writing and one of the longest guarantees in residential construction. Call (888) 426-8078 to review the details on your estimate.
Get a free estimate on your Seagoville concrete project
If your driveway has heaved, cracked through, or you’re pouring new, we’ll come out, check the soil and the county line, and give you a written line-item estimate at no cost. On the call, a live person answers 24/7, asks about your lot, and books a site visit that works around your schedule. Reach us at (888) 426-8078. Estimates are free and the number you see is the number you pay.
Written by the team at Groundwork Construction Co.












