







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Rockwall, TX: What the Job Actually Involves
Cabinets and countertops in Rockwall typically run $14,000 to $45,000 for a full tear-out and replacement, and most jobs take two to four weeks from demo to final walkthrough. You’re replacing the cabinet boxes or refacing the doors, templating new countertops after the cabinets are set, and tying both into the existing plumbing, electrical and backsplash. Call (888) 426-8078 and we’ll set a free on-site estimate so you’re pricing your actual kitchen, not a ballpark.
How we run a cabinet and countertop job, stage by stage

Cabinet and countertop work has a fixed order, and skipping a step is how you end up with a counter that doesn’t fit the box it sits on. Here’s the real sequence we follow on a Rockwall job.
Stage 1 – Measure and design lock-in (day 1, 2 to 3 hours). We measure the room, check the walls for plumb and the floor for level, and confirm your layout: box sizes, drawer stacks, where the sink lands, where the range goes. This is where you decide door style, finish and the appliance footprint, because the cabinet order can’t go out until those are fixed.
Stage 2 – Order and lead time (2 to 5 weeks, before demo starts). Semi-custom lines like KraftMaid run a few weeks; stock boxes come faster. You sign off on the cabinet order and the countertop material selection here. Nothing gets torn out until the cabinets are on site, which is the single biggest schedule mistake we see on jobs where another crew demoed first and the kitchen sat open for a month.
Stage 3 – Demo and prep (1 to 2 days). Old cabinets and counters come out, we shut off and cap the plumbing, and we inspect what’s behind the wall: water damage at the sink, old wiring, a floor that’s out of level. Any surprise here gets quoted before we move on, not after.
Stage 4 – Cabinet set and countertop template (2 to 3 days, then a template visit). New boxes go in, shimmed and scribed to the wall, doors and drawers hung and adjusted. Then the countertop fabricator comes out to template the actual installed cabinets. That template is why the counter fits to the millimeter and why it can’t be ordered earlier.
Stage 5 – Counter install, sink, backsplash and punch (3 to 5 days). The counter goes down, the sink and faucet get set, the dishwasher gets reconnected, and any backsplash goes up. We walk the job with you, adjust doors and drawer fronts, and hand over.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll weigh before you sign the order
Most of the decisions on this job come down to four or five calls, and each one has an honest trade-off.
- Stock vs. semi-custom boxes. Stock sizes are cheaper and faster but leave filler strips at the walls. Semi-custom lets you hit the ceiling and dial in drawer stacks, at a higher per-box cost.
- Refacing vs. full replacement. Refacing keeps the existing boxes and swaps doors and veneer at roughly half the cost, but it only works if the boxes are solid and the layout already suits you.
- Quartz vs. granite vs. laminate counters. Quartz is the default for a reason: non-porous, no sealing, consistent slabs. Granite is natural stone with real variation and needs resealing. Laminate is the budget end and won’t hold up the same way near a hot range.
- Sink and faucet configuration. Undermount sinks look cleaner and are easier to wipe down but need a solid counter edge. A drop-in sink is cheaper and simpler to swap later.
- Door finish and hardware. Painted finishes show chips; stained and thermofoil hold up differently under a hot Texas kitchen. Soft-close hinges and full-extension drawer slides are worth the small upcharge every time.
Our techs have up to 12 years of experience setting boxes and templating counters, and we work with KraftMaid cabinetry and Cambria quartz because both hold their finish and both come with real warranty backing. You pick the material; we put the numbers in writing so the choice is yours to make, not a surprise on the invoice.
What Cabinets & Countertops costs in Rockwall, TX

Expect $14,000 to $45,000 for a full cabinet and countertop replacement in Rockwall. The low end is a mid-size kitchen with stock boxes and laminate; the high end is a large waterfront kitchen with semi-custom cabinetry, quartz slabs and a new island. Here’s how the line items shake out:
| Item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island | $3,000 – $10,000 |
| Backsplash | $800 – $2,500 |
What pushes a job toward the high end: square footage of cabinetry run, whether we’re relocating plumbing or electrical (moving a sink or range adds real labor and a permit), the condition of the floor and walls once demo exposes them, the material grade you choose, and whether the job needs a permit for any plumbing or electrical changes. A written estimate from us lists what’s included – demo, cabinets, counters, sink set, haul-away – and flags anything that’s typically extra, like appliance hookup beyond the standard range and dishwasher reconnect if the wiring isn’t already there.
Part of this scope is often part of a Kitchen Remodeling in Rockwall project, and when it is, we scope the cabinets and counters as one piece of the larger plan so nothing gets ordered twice or sits in a garage. You can also see our broader Kitchen Remodeling work if you want the full picture.
See the difference
Before
After
Before
After
Before
AfterWhat Rockwall homes specifically do to this job
Rockwall is the only city in the Dallas – Fort Worth metro built entirely around a 22,000-acre lake, and that shapes what we find when we pull cabinets. The 1990s – 2000s brick-and-stone builds in Stone Creek and Chandler’s Landing are mostly straightforward slab kitchens, but the older pier-and-beam lake cottages on the original shore streets of 75032 sit on foundations that move with the Blackland Prairie clay, and a kitchen floor that has racked a quarter inch throws off cabinet runs and counter templating in a way a flat slab never does. On the water side of Rockwall, near-shore rebuilds often run into Corps of Engineers shoreline permitting and City of Rockwall dock/boathouse regulations, and that paperwork layer can affect a kitchen that’s part of a larger rebuild. ZIP codes 75087 and 75032 both get plenty of summer heat, so we spec finishes and thermofoil that hold up to a hot Texas kitchen rather than warping by year three. When we cover Rockwall and the surrounding lake communities, the typical failure we see at tear-out is water damage at the sink base and old wiring feeding a range that’s been swapped three times.
Serving Rockwall, TX – Our Local Coverage Area
We serve Rockwall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Rockwall

Plan on two to four weeks of on-site work, plus cabinet lead time of two to five weeks before demo starts. The template and counter fabrication stage alone takes several days, which is why a same-week finish isn’t realistic on this scope.
You need a permit if the job moves plumbing, electrical or gas – relocating a sink, adding a circuit for a range, or re-running a dishwasher line. A straight replacement of cabinets and counters in the same footprint generally doesn’t require one. We pull the permit when it’s needed and can talk you through the scope on the estimate.
Yes, and it’s the most common way we do it. Keeping the sink and range where they are holds the price near the low end of the $14,000 – $45,000 range and shaves days off the schedule. Moving a sink or knocking out a wall to open up the kitchen pushes the number up and brings a permit into play.
The range is $14,000 to $45,000 for a full replacement. Our pricing is upfront and written – the number on the estimate is the number you pay, unless demo exposes something no one could see, like rotted subfloor at the sink or a wall that isn’t plumb. Anything like that gets quoted and approved before we touch it.
Every cabinet and countertop job we do is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to the install, not just the materials.
Get your free Cabinets & Countertops estimate in Rockwall
Call (888) 426-8078 for a free on-site estimate on cabinets and countertops in Rockwall. A live person answers around the clock, and on the visit we’ll measure the kitchen, talk through box style and counter material, and leave you with a written line-item price – no vague ballpark. If the job grows into a full kitchen, homeowners often pair this with a Walk-In Showers & Shower Remodeling in Rockwall or a Tub-to-Shower Conversion in Rockwall while the crew is already on site.
Written by the team at Groundwork Construction Co.












