







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Rockwall, TX: What It Costs and How Long It Takes
An aluminum fence in Rockwall, TX typically runs $3,500 to $9,000 for a standard residential run, and most jobs wrap up in two to four days once we’ve pulled permits and marked utilities. You’re buying a powder-coated, rust-resistant barrier that handles lake humidity and clay soil better than untreated steel, and it holds up to hail without the maintenance wood demands. Call (888) 426-8078 for a free on-site estimate – we’ll measure the run, confirm grade, and give you a written line-item quote before anything gets ordered.
How We Install an Aluminum Fence in Rockwall, Start to Finish

Aluminum fence work looks simple from the street. The part that determines whether it’s still straight in ten years happens below grade, and that’s where most of the schedule and the skill live. Here’s the actual sequence for a Rockwall job.
Stage 1: On-site measure and utility locate (day 1)
We walk the property line with you, confirm exact run length, gate locations, and post spacing, then call in the 811 utility locate. In North Texas clay, a post hole that clips an irrigation line or a buried low-voltage run turns a two-day job into a five-day job, so this step isn’t optional. Expect the locate to clear within 48 to 72 hours. You decide the fence line and gate swing here.
Stage 2: Permit check and HOA review (days 1 to 3)
Rockwall permits residential fence work, and if you’re inside a subdivision with an HOA, the architectural review board usually wants a survey, a plat drawing and the fence spec before they’ll sign off. We handle the submittal and the inspection schedule. You decide whether to go with the HOA-preferred height and style or file a variance. Skipping the HOA step is the single most common reason a fence gets torn back out.
Stage 3: Demo and site prep (day 3, typically half a day)
Old fence comes down, posts and concrete footings get extracted, and the line gets cleared. We haul off debris the same day. If the old footings were set shallow in the black gumbo that runs through a lot of Rockwall, we replace them rather than reusing them. You don’t need to be home for this, but we’ll send photos when it’s done.
Stage 4: Post setting and curing (day 3 into day 4)
Aluminum posts get set in concrete footings sized to depth and soil condition, then they cure before any panels or rails go up. This is the wait most homeowners don’t expect, and it’s the one we won’t shortcut. Set posts on uncured concrete and the fence racks out of plumb within a season. You’ll see the post layout before we pour.
Stage 5: Panels, gates, hardware and final walkthrough (day 4)
Rails and pickets mount, gates hang and get adjusted for swing and latch alignment, and we walk the whole run with you checking plumb, height and hardware function. Any punch items get handled on the spot. Then you get the paperwork, including the 730-Day Done Right Promise. If it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Actually Choose Between
The spec conversation is where the price range opens up. Here’s what moves it, and the honest trade-off on each.
- Residential-grade vs. heavy-gauge pickets. Standard residential aluminum runs thinner walls at a lower cost; heavier-gauge stock costs more per linear foot but shrugs off a mower strike or a leaning ladder. Most Rockwall suburban lots are fine with residential grade unless you’re backing onto a greenbelt.
- Powder-coat finish color. Black, bronze and architectural white are the standards. Custom colors usually carry an upcharge and a longer lead time. Powder coat is what keeps lake moisture from reaching the metal, so don’t cut corners here.
- Picket style and spacing. Three-rail, two-rail, flat-top, spear-top, and decorative picket patterns all price differently. Tighter spacing adds material cost but blocks small dogs and adds privacy.
- Height. Four-foot is the common residential height; five-foot reads more like a property barrier and often requires a variance or HOA approval near the water.
- Gate hardware and automation. A standard walk gate is one price; a double drive gate or an automated operator with keypad and remote adds real money. Get this decided before the order goes in, not after.
- Rackable vs. fixed panels. Sloped yards need rackable panels to follow the grade. On the rolling lots above Lake Ray Hubbard, that’s often the right call over stepped panels.
What an Aluminum Fence Costs in Rockwall, TX

Most aluminum fence installations in Rockwall land between $3,500 and $9,000. A simple side-yard run on flat ground with standard black pickets sits at the low end; a full perimeter with a drive gate, custom color and sloped grade pushes toward the top.
- Linear footage: the biggest lever. A 100-foot run and a 300-foot run aren’t the same job.
- Grade and soil: clay that swells and shrinks through the wet-dry cycle may need deeper footings and more concrete per post, which adds labor and material.
- Demo and haul-off: removing an existing fence, especially one with deeply set footings, is a line item. Sometimes it isn’t.
- Gates and automation: every gate adds hardware, adjustment time and often a second post pour.
- Permit and HOA scope: a straightforward city permit is one cost; a shoreline-adjacent property that triggers additional review is another.
A written estimate from us is line-itemed: footage, post count, concrete, gate hardware, permit fees, and demo. What’s typically not included is landscape repair after post-setting and any utility relocation if a locate comes back with a conflict. We flag those upfront so the number you see is the number you pay. The 0% financing for 18 months and $1,000 off projects over $10,000 apply if the job qualifies, and we’ll say so in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Rockwall Homes Specifically Do to This Job
Rockwall is the only city in the Dallas – Fort Worth metro built entirely around a 22,000-acre lake, and that changes this job in ways an inland contractor won’t anticipate. On the lake side of town, in ZIP codes 75087 and 75032, we’re regularly working behind older pier-and-beam lake cottages on the original shore streets, where the yard slopes hard toward the water and the fence line has to rack with the grade rather than run level. Properties close enough to the shoreline can run into Corps of Engineers review and City of Rockwall dock and boathouse regulations that add a paperwork layer to what looks like a simple fence permit.
Inland, most of what we install goes up around 1990s – 2000s brick-and-stone homes in subdivisions like Stone Creek and Chandler’s Landing. Those yards sit on the same expansive clay that moves foundations across this part of North Texas, so footing depth and drainage matter more than they would on sandy soil. We also see hail-battered old fences along the exposed corridors near the water, and mower damage on the aluminum that does survive. If you’re fencing as part of a wider exterior project, it’s worth pairing with Driveway Repair & Replacement in Rockwall or Patios, Walkways & Pool Decks in Rockwall so the trades don’t tear up each other’s work. For a broader look at everything we do in Rockwall, start there.
Aluminum fence is often one piece of a full exterior plan. If you’re planning the whole property at once, see our Fence Installation in Rockwall page for the wider scope, or explore our Fence Installation service for the full range of materials we offer.
Serving Rockwall, TX – Our Local Coverage Area
We serve Rockwall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Aluminum Fence in Rockwall

Most aluminum fence installs in Rockwall take two to four days of on-site work, plus 48 to 72 hours ahead of time for the utility locate and permit review. The curing window for post footings is the variable most homeowners underestimate. Call (888) 426-8078 to get a firm timeline for your property.
Yes, Rockwall permits residential fence work, and subdivisions with an HOA typically require architectural review approval on top of that. We handle the submittal and inspection schedule for you. Call (888) 426-8078 and we’ll confirm what your specific lot requires.
Not on our jobs. We give a written line-item estimate, fixed before we order material, and we absorb surprises like a shallow footing or a rock hit. If something genuinely outside scope comes up, we show you the cost and get approval before doing anything. Call (888) 426-8078 for a free estimate – the number you see is the number you pay.
Yes. Sloped lots above Lake Ray Hubbard are common, and we handle them with rackable panels that follow the grade instead of stepped sections. Shoreline-adjacent properties may need additional review we’ll walk you through. Call (888) 426-8078 to schedule an on-site measurement.
Every aluminum fence we install is covered by the 730-Day Done Right Promise – one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. Call (888) 426-8078 to schedule your free estimate and see the warranty terms in writing.
Get a Free Aluminum Fence Estimate in Rockwall
Call (888) 426-8078 to schedule a free on-site estimate for your aluminum fence in Rockwall. We’ll measure the run, check the soil and grade, review permit and HOA requirements, and hand you a written line-item quote with no surprises. Calls are answered by a live person, and every job is backed by the 730-Day Done Right Promise. Free project estimate and design consult included.
Written by the team at Groundwork Construction Co.












