







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Sachse, TX: What the Job Actually Involves
A vanity, tile, and fixture package in Sachse runs $9,000 – $28,000 and takes two to four weeks of actual work on site, spread across demo, rough-in, tile, vanity install, and fixture trim-out. Most of that number is tile and labor, not the vanity itself. If you’re pricing just a vanity swap or a single tile surround, the scope shrinks fast. Call (888) 426-8078 and we’ll scope it honestly before anyone swings a hammer.
How We Run a Vanity, Tile & Fixture Job, Stage by Stage

This isn’t a vague “we handle everything” promise. Here’s the real sequence and what you decide at each stop.
Stage 1: Demo and substrate check (days 1 – 2)
We pull the old vanity, tear out tile, and expose the wall and floor underneath. This is where the job either stays on budget or opens up. In older Sachse homes, we regularly find water damage behind a vanity back or a failed shower pan membrane. We photograph everything and walk you through what we found before we quote the repair. You decide whether to replace just the damage or upgrade the surrounding area while it’s open.
Stage 2: Rough-in and waterproofing (days 2 – 4)
Plumbing rough-in for the new vanity sink position and any relocated supply lines happens here. Cement board goes up, then a roll-on or sheet waterproofing membrane over the wet areas. This stage is the one nobody sees and the one that decides whether the tile lasts. You confirm fixture placement and valve height before the board closes.
Stage 3: Tile layout and setting (days 4 – 9)
We dry-lay the tile so you can see the layout and grout lines before anything gets thinset. Floor tile, then wall tile, then the shower if it’s part of the scope. Large-format tile on a floor that isn’t flat needs a self-leveling pour first, which adds a day. You approve the layout and grout color at this point.
Stage 4: Vanity set and countertop (days 9 – 11)
The vanity cabinet gets set, leveled, and shimmed to the floor. We measure the countertop for a template, and if it’s stone you’re choosing the actual slab. Sink and faucet cutouts get drilled off-site. Expect three to five business days between template and install for fabricated tops. You pick the counter material and edge profile here.
Stage 5: Fixture trim-out and punch (days 11 – 14)
Faucet, drain, shower valve trim, towel bars, mirror, and lighting go in. We run water, check for leaks, and caulk the wet seams. Then we do a walkthrough with you, blue-tape anything that isn’t right, and fix it before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Vanity cabinet material: Plywood box with a solid-wood face holds up to North Texas humidity far better than particleboard. Particleboard saves $200 – $500 but swells at the toe kick if a supply line ever drips. KraftMaid and similar mid-tier lines split the difference on price and durability.
- Countertop: Quartz is the default for a reason – it doesn’t stain, doesn’t need sealing, and handles a hot iron better than most. Cambria and comparable brands run higher; granite costs less but needs resealing every year or two.
- Floor tile: Porcelain is harder, denser, and more stain-resistant than ceramic for a modest bump in price. Large-format tile (12×24 or bigger) means fewer grout lines to clean but demands a flatter substrate.
- Wall tile: Subway is cheap and forgiving. Full-height slab or large-format wall tile costs more in material and labor but eliminates grout from the shower walls entirely.
- Shower valve and trim: A thermostatic valve keeps water temperature steady when someone flushes a toilet. Standard pressure-balance valves are cheaper and meet code, but you’ll feel the temperature swing.
- Frameless glass vs. framed: Frameless glass costs more but doesn’t collect grime in a metal track and reads cleaner in a small bathroom.
What Vanities, Tile & Fixtures Costs in Sachse, TX

A full package – vanity, floor and wall tile, shower tile, and all fixtures – runs $9,000 – $28,000 in Sachse. A vanity-only swap with no tile runs $800 – $3,000. A walk-in shower build with tile and glass sits around $4,500 – $12,000. Here’s what pushes the number up or down:
- Square footage of tile: the single biggest variable. A 5×8 bathroom with full shower tile is half the tile of a large primary bath.
- Moving plumbing: relocating a sink or shower drain means cutting the slab and re-routing, which adds $1,500 – $4,000 depending on distance.
- Substrate condition: a soft floor or rotted wall behind the vanity turns a simple swap into a rebuild.
- Material grade: builder-grade porcelain and a stock vanity vs. large-format slab and a custom cabinet line is the difference between $9,000 and $28,000.
- Permit scope: plumbing relocations and shower pan changes trigger inspection; a straight cosmetic swap usually doesn’t.
A written estimate from us lists every line item – tile by square foot, cabinet, counter, fixtures, labor, disposal – and the price on paper is the price you pay. No change orders for things we should have seen on day one. That’s the Upfront Pricing commitment, and it’s backed in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Sachse Homes Specifically Do to This Job
Sachse sits on the Blackland Prairie clay that underlies the eastern Dallas suburbs, and that clay moves. It holds water through the winter and cracks open in summer heat, so a bathroom floor that was dead flat in March can show a crack or a cracked tile joint by August. We check for floor movement and any stair-step brick cracks on the exterior wall before we set tile in a Sachse home, because tile over a moving slab will crack no matter how good the thinset is. If we find movement, that’s a conversation about the foundation before it’s a conversation about tile.
Most of the housing stock here is suburban single-family built from the 1980s through the 2000s, on slab, with brick veneer. In the 1990s-era tracts, we regularly see original builder-grade vanities with particleboard boxes that have swollen at the base, and shower pans that were never properly sloped. That era of construction is where a “simple vanity replacement” most often turns into a substrate repair. Homeowners near Sachse Road and along the Pleasant Valley corridor typically pair this work with exterior repairs, and it’s common to see the bathroom scope line up with Tile Roofing in Sachse or Specialty Roofing in Sachse when a storm has knocked out both the roof and the bathroom ceiling. Our Sachse service area covers the whole 75048 ZIP.
Serving Sachse, TX – Our Local Coverage Area
We serve Sachse and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Sachse

Two to four weeks of on-site work for a full package, with most of that in tile and the countertop fabrication wait. A vanity-only swap can finish in two or three days. Call (888) 426-8078 for a timeline based on your actual scope.
Cosmetic work – new tile, a like-for-like vanity, fixture swaps – typically doesn’t need one. Moving plumbing, relocating a drain, or changing a shower pan does, and we pull those permits and schedule the inspection. Estimates are free, so call (888) 426-8078 and we’ll tell you which camp you’re in.
In most cases, yes. A new vanity of the same width and a new tile layout over the existing drain positions won’t touch the rough-in. Relocating the sink or shower is what drives the price up. Call (888) 426-8078 and we’ll confirm before you commit.
$9,000 – $28,000 for a full bathroom package, with a vanity-only job at $800 – $3,000 and a tiled walk-in shower at $4,500 – $12,000. Tile square footage and material grade drive most of the spread. Call (888) 426-8078 for an exact quote – estimates are free.
Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years after completion. That covers workmanship on tile, waterproofing, and fixture installation. Call (888) 426-8078 with any warranty question.
Get a Free Estimate on Vanities, Tile & Fixtures in Sachse
We’ll walk your bathroom, measure the tile, check the substrate, and hand you a written line-item estimate – free, no pressure. That’s our Bathroom Remodeling service at the fixture and finish level, and it’s part of a full Bathroom Remodeling in Sachse if the scope grows. Call (888) 426-8078 and a live person answers, any hour. Our technicians have up to 12 years of experience.
Written by the team at Groundwork Construction Co.












