







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Wylie: What the Job Actually Costs and Involves
Replacing a vanity, tiling a floor or shower surround, and swapping fixtures in a Wylie bathroom typically runs $9,000 – $28,000 for a full tear-out, and $800 – $3,000 if you’re only changing the vanity itself. Tile work, plumbing and electrical access, and material grade move that number more than anything else. Most single-bathroom jobs in Wylie finish in two to four weeks once materials are on site. Call (888) 426-8078 for a free on-site estimate with a written line-item quote.
How We Run a Vanities, Tile & Fixtures Job, Start to Finish

Tile and fixture work lives or dies on what happens before the first tile is set. Here’s how the sequence actually goes.
Stage 1: Site walk and measurements (Day 1, 60 – 90 minutes)
We measure the existing vanity footprint, check valve shutoffs and drain locations, and confirm whether the subfloor is flat enough for large-format tile. You’ll decide at this stage whether the vanity stays put or moves. Moving a drain or supply line is the single biggest cost swing on the job, so we price both versions of the layout before anything gets ordered.
Stage 2: Tear-out and inspection (Days 2 – 3)
Old vanity, tile, and surround come out. We inspect for water damage behind the shower wall and under the floor, and we pull a moisture reading on the subfloor before we promise a tile date. Wylie’s clay soils push and pull slabs seasonally, so a subfloor that reads flat in March isn’t always flat by summer; we note deflection and any crack lines before we set a single bag of mortar.
Stage 3: Rough-in and prep (Days 3 – 5)
Plumbing and electrical rough-in happens here if the layout changed, and that work gets inspected before walls close up. Cement board or a bonded waterproofing membrane goes down next, followed by a flood test on the shower pan. You commit to tile and fixture selections during this window, because grout color, trim profile, and valve trim need to be on hand before final setting.
Stage 4: Tile and setting (Days 5 – 10)
Floor tile sets first, then walls. Large-format porcelain in a Wylie bathroom usually needs a leveling clip system, which adds a day of setting time but keeps lippage out of the finished floor. Grout and caulk come last, and we use flexible sealant at every change of plane, not grout.
Stage 5: Vanity, fixtures, and final inspection (Days 10 – 16)
The vanity sets, the countertop gets templated if it’s natural stone, and the faucet, shower valve, and drain trim go on. We run a final water test, check tile joints and caulk lines, and walk the room with you before we close out. Your selections at Stage 3 determine how fast this last stretch moves; a stocked vanity ships in days, a custom cabinet run takes longer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Weigh Before We Start
Most of the decisions that matter happen in a handful of categories. Here’s the honest trade-off on each.
- Vanity type: a freestanding or stock cabinet is the budget play and installs fast; a custom or semi-custom vanity gets you the exact width and door style but adds lead time and cost. KraftMaid and Kohler are brands we work with regularly.
- Countertop: quartz is the practical choice in a bathroom, forgiving and easy to keep sealed; natural stone like Cambria looks richer but needs more care and careful sealing.
- Tile material: porcelain is the workhorse, tough and water-resistant; natural stone (marble, travertine) is warmer underfoot but stains and needs sealing every year or two.
- Tile size: large-format tiles mean fewer grout lines and a cleaner look, but a flatter subfloor and more setting time; small mosaic formats hide subfloor variance and suit a shower floor well.
- Fixtures and finish: brushed nickel and matte black stay in style and hide water spots better than polished chrome; a pressure-balanced shower valve is worth the upgrade over a basic cartridge.
- Glass and door: a framed shower door keeps cost down; a frameless enclosure looks sharper and costs more.
If the tile and vanity work is part of a full Bathroom Remodeling in Wylie, we sequence the trades so you’re not paying twice for the same demolition and haul-away.
What Vanities, Tile & Fixtures Costs in Wylie, TX

For a full tear-out and redo of one Wylie bathroom, expect $9,000 – $28,000. The low end is a straightforward swap with stock materials and no plumbing movement; the high end is a larger room with custom cabinetry, natural stone, and relocated plumbing. Here’s a line-item look at what moves the number:
- Bathroom Vanity Installation: $800 – $3,000
- Walk-In Shower Installation: $4,500 – $12,000
- Shower Replacement: $3,000 – $8,500
- Backsplash and accent tile: typically $800 – $2,500 depending on square footage and material
The variables that push a job from low to high end: room size and tile square footage, whether plumbing or electrical has to relocate, material grade (porcelain versus marble, stock versus custom vanity), subfloor condition and how much prep it needs, and permit scope. A written estimate from us lists demo, prep, setting materials, tile, fixtures, and labor line by line. What it won’t cover unless you ask: structural changes, mold remediation if we find an active leak, or upgraded venting. Get the full-scope estimate before you sign anything; our bathroom remodeling service handles the whole room if you decide to expand the scope.
See the difference
Before
After
Before
After
Before
AfterWhat Wylie Homes Specifically Do to This Job
Wylie grew from a small Collin County farm town into one of the fastest-growing suburbs in the Metroplex, and that history shows up in the bathrooms we work on. Most of what we see is 2000s-to-present single-family subdivision housing: brick veneer, two-story, post-tension slab-on-grade, ZIP code 75098. Those homes usually need fixture and finish upgrades rather than major structural work, and the builder-grade original vanities and tile are the common targets. There’s also a shrinking core of mid-century ranch homes near downtown Wylie along FM 544 and Highway 78, where we deal with older subfloors and plumbing stacks that need a closer look. The local condition that actually matters for tile is the expansive blackland-prairie clay under so much of Wylie’s former pasture land. That clay moves, and a subfloor that was flat when the slab was poured can crown or settle enough to crack tile and separate grout lines; we check for that before we set anything. If you’re also updating the outside of the house, homeowners often pair this with Tile Roofing in Wylie or Specialty Roofing in Wylie. We cover Wylie and the surrounding communities.
Serving Wylie, TX – Our Local Coverage Area
We serve Wylie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Vanities, Tile & Fixtures in Wylie

A single bathroom typically takes two to four weeks once materials are on site. A vanity-only swap can finish in a day or two, while tile-heavy work with custom cabinetry and relocated plumbing runs toward the longer end. Call (888) 426-8078 and we’ll give you a real schedule for your room, not a guess.
Cosmetic tile, paint, and swapping a vanity or faucet usually don’t require a permit; relocated plumbing or electrical lines generally do, and Wylie inspections happen before walls close up. We pull the permit when the scope needs one and schedule the inspection as part of the job. Call (888) 426-8078 with your scope and we’ll tell you straight.
Yes. Keeping the drain, supply lines, and vanity footprint where they are is the lowest-cost and fastest version of this job. Relocating plumbing raises the price and extends the timeline. Call (888) 426-8078 to schedule a free on-site estimate and we’ll price both layouts for you.
A full bathroom redo with new vanity, tile, and fixtures runs $9,000 – $28,000; a vanity alone is $800 – $3,000. The exact number depends on room size, material grade, and whether plumbing moves. Call (888) 426-8078 for an exact quote, and estimates are free.
All our work carries the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the tile, setting, and fixture installs, with background-checked, uniformed technicians on every job. Call (888) 426-8078 and we’ll walk you through exactly what’s covered.
Ready for a Free Estimate on Vanities, Tile & Fixtures in Wylie?
Every job starts with a free on-site estimate and a written line-item quote, so you see the number before anyone touches a tile. We answer the phone with a live person, day or night, and all work is backed by a 730-Day Done Right Promise. To start, call (888) 426-8078. We’ll set a time, measure the room, and give you a price you can plan around. You can also take $1,000 off projects over $10,000, with 0% financing for 18 months available.
Written by the team at Groundwork Construction Co.












