







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Royse City, TX: What the Job Actually Takes
Cabinets & countertops in Royse City typically run $14,000 – $45,000 for a full kitchen’s worth of both, and most jobs take two to three weeks from demo to final caulk. If you’re only swapping tops, expect $2,000 – $6,500 and three to five days. Cabinet-only work lands around $4,000 – $13,000. The number that matters is which of those three jobs you’re actually buying. Call (888) 426-8078 and we’ll tell you straight after a walkthrough.
Here’s the part most Royse City homeowners don’t hear until they’ve signed: in the newer subdivisions off I-30 and FM 548, the cabinets that came with the house are often the first thing to fail, not the last. Builder-grade boxes, particleboard sides, stapled joints. When that clay under the slab moves and the wall racks a quarter inch, those cabinets telegraph it before the drywall does. We see it constantly in 75189.
How the work actually runs, stage by stage

Stage 1: Measure and decisions (day 1, about 90 minutes). We template the existing layout, check every wall for plumb and the floor for level. This is where you decide box construction, door style, and whether the sink stays put. What we find on that wall check changes the plan more often than you’d expect. A wall out of plumb by more than half an inch means filler strips or a shimmed run, and we tell you that day, not after the boxes arrive.
Stage 2: Demo and prep (days 2 – 3). Old cabinets and tops come out, usually in a single day. Then the wall repair and any electrical rough-in for outlets that were buried behind the old boxes. If you’re moving the range or adding a dedicated circuit for a microwave drawer, the electrician is here in this window. Count on two days if the layout stays, four to five if anything moves.
Stage 3: Cabinet install (days 4 – 6). Bases first, leveled and shimmed, then uppers hung off a ledger line. Crown and light rail go on after. We don’t set tops until every box is dead level, because a countertop poured to a racked cabinet run shows every bit of it. You’ll walk the room with us at the end of this stage before anything gets covered up.
Stage 4: Template for stone (day 7). If you’re going with quartz or natural stone, the fabricator comes out to laser-template the actual installed cabinets. Your slab choice and edge profile get locked in here. This is the last decision point that moves the price, so it’s the one to take seriously. Silestone and Caesarstone both template the same way; the difference is in slab availability and finish.
Stage 5: Countertop install and finish (days 10 – 14). Fabrication runs five to seven business days after template. Slabs go in, seams get epoxy and polish, sink and faucet get set, and the caulk line goes down last. You’re back in the kitchen that evening. Kohler and Moen fixtures are both stocked widely enough that we’re rarely waiting on a faucet.
Total elapsed time: two to three weeks on a straight swap. Add a week if you’re relocating the sink or opening a wall. Add two if the cabinets are custom rather than semi-custom.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually be making
- Semi-custom vs. stock boxes. Stock cabinets arrive in days and cost less; semi-custom lets you hit odd wall widths and pick interior fittings. For most Royse City layouts, semi-custom is the sweet spot.
- Plywood vs. particleboard sides. Plywood holds screws and survives a flood event. Particleboard is cheaper and fine until it isn’t. In a house where the slab may move, plywood earns its keep.
- Quartz vs. granite vs. butcher block. Quartz is non-porous and consistent slab to slab; granite is unique and heat-tolerant but needs sealing; butcher block is warm and cheap and wants oiling. Most of our Royse City clients land on quartz.
- Slab thickness and edge. 3cm is standard. A mitered edge reads as 6cm and adds cost and weight. Pick the profile before template day.
- Sink and faucet undercount. Farmhouse sinks require a cabinet built for them. Undermount is the default. This is a decision made before the boxes are ordered, not after.
What Cabinets & Countertops costs in Royse City, TX

Full cabinets plus countertops in Royse City runs $14,000 – $45,000. Here’s what pushes a job to one end or the other.
| Line item | Typical range |
|---|---|
| Cabinet installation (full kitchen) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Island (if adding one) | $3,000 – $10,000 |
| Backsplash (paired work) | $800 – $2,500 |
The five variables that move the number:
- Linear feet. A 12-foot galley and a 30-foot L-shape are different jobs. Most of the pricing lives here.
- Material grade. A stock cabinet line and a KraftMaid semi-custom line are both “cabinets.” They aren’t the same budget.
- Plumbing and electrical relocation. Moving the sink six feet means drain rework. Adding a circuit means an electrician. Both add days and dollars.
- Wall and floor condition. Out-of-plumb walls and unlevel floors mean shims, fillers, and sometimes a floated patch. In newer Royse City builds on that clay, this is more common than it should be.
- Permit scope. Like-for-like swap usually doesn’t require one. Moving plumbing or opening structure does.
A written estimate from us covers demo, haul-away, cabinet install, countertop template and install, sink and faucet set, and caulk. It usually doesn’t cover backsplash tile (that’s a separate scope), appliance hookup, or any wall repair beyond minor patching. We tell you which items are in and which are out before you sign. The number you see is the number you pay, and the whole thing is covered by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Royse City homes specifically do to this job
Royse City is growing east along I-30 faster than crews and inspectors can honestly keep up. That shapes this job in a way it doesn’t in older suburbs. The housing stock here is overwhelmingly last-15-to-20-years new construction, with scattered 1970s – 90s ranch homes and acreage places on the outskirts. The new-build cabinets are the ones we’re replacing most: builder-grade boxes that were installed before the slab had fully settled.
That’s the Blackland Prairie clay at work. It swells in the wet season and shrinks in the dry one, and the new subdivisions off FM 548 feel it. Walls rack slightly. Floors go out of level at the perimeter. Cabinets that were dead plumb at handover aren’t anymore. When we template those walls, we find the problem every time. Building the new run to compensate is part of the job, and pretending it isn’t is how you end up with a countertop that rocks.
Permitting is straightforward for a like-for-like swap in Royse City. Once you move plumbing, add a circuit, or touch structure, expect an inspection. We pull the permits and pass the inspections on any job that requires it. If you’re widening this into a bigger renovation, that’s our Kitchen Remodeling service, and if the scope grows further, here’s Kitchen Remodeling in Royse City. Homeowners often pair this work with Walk-In Showers & Shower Remodeling in Royse City or a Tub-to-Shower Conversion in Royse City when they’re doing the whole floor at once.
We cover Royse City and the surrounding corridor including Fate, Rockwall, Heath, and Wylie. Our technicians have up to 12 years of experience, and they arrive background-checked and in uniform.
Serving Royse City, TX – Our Local Coverage Area
We serve Royse City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Royse City

Two to three weeks from demo to final walkthrough on a straight swap. Add a week for plumbing or electrical relocation, and two if you’re going custom cabinets. We give you the schedule in writing before we start, and if something slips, you hear it from us the same day. Call (888) 426-8078 to get a timeline for your specific kitchen.
Not for a like-for-like swap. You do once plumbing moves, an electrical circuit is added, or structure is touched. We handle the permit and the inspection on any job that triggers it. Call (888) 426-8078 and we’ll tell you which category your job falls in before you commit.
Yes, if the existing boxes are solid and level. We template the counters as installed and fabricate to fit. If the boxes aren’t level, a new top will rock or crack, so we check that first. Call (888) 426-8078 for a free on-site look.
$14,000 – $45,000 for a full kitchen’s worth of both, depending on linear feet, material grade, and whether anything moves. Countertop-only work is $2,000 – $6,500; cabinet-only is $4,000 – $13,000. Call (888) 426-8078 for an exact quote. Estimates are free, and projects over $10,000 get $1,000 off.
Every cabinets and countertops job we do is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right. That’s in writing, not in conversation. Call (888) 426-8078 with any question about coverage before you sign anything.
Get a free estimate on your Royse City kitchen
Call (888) 426-8078 for a free on-site estimate on cabinets & countertops in Royse City. A live person answers, day or night. We’ll walk your kitchen, check the walls and floor, and hand you a written line-item quote with the scope spelled out: what’s included, what isn’t, and the total. No-pressure, no hidden line items. Then you decide.
Written by the team at Groundwork Construction Co.












