







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Royse City, TX: What It Takes and What It Costs
A tub-to-shower conversion in Royse City typically runs $3,500 to $10,000 and takes 5 to 10 working days from demo to final inspection. The job means pulling the old tub, reframing and waterproofing the alcove, rerouting the drain and valve to shower height, then setting a new pan, walls and glass. Most Royse City homes we see for this work sit in subdivisions built in the last 15 to 20 years, where the original tub-and-surround is now tired but the framing is still sound. Call (888) 426-8078 to set up a free on-site estimate.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage

Most contractors give you a start date and disappear. Here’s what the calendar looks like when we run this job, so you know what to expect on each day and where your decisions land.
Stage 1: Tear-out and inspection (day 1)
We shut off water, pull the tub, and strip the surround down to studs. The moment the wall is open, we check for the two failures that hide behind tubs: soft drywall from a slow valve leak, and a rotted subfloor around the drain. Both are common in early-2000s builds where the original caulk gave out years ago. If the framing or subfloor needs repair, we show you photos before anything gets covered back up.
Stage 2: Rough plumbing and framing (days 1 – 2)
We raise the drain to shower-pan height, replace the valve if it’s original (worth doing while the wall is open), and set blocking for grab bars and a bench if you want one. This is the stage that decides your final number. Moving the drain a few inches inside the same footprint is routine. Moving the shower to a different wall, or relocating the supply lines, adds real labor and sometimes a permit amendment.
Stage 3: Waterproofing and inspection (days 2 – 4)
We install a bonded waterproofing membrane or a cement backer with a liquid-applied system, tape every seam, and flood-test the pan. In Royse City, this is where a municipal inspection typically happens if the plumbing was moved. We schedule it and we’re on site for it, so you’re not chasing anybody.
Stage 4: Tile, pan and fixtures (days 4 – 7)
Tile goes up, the pan is set, the shower valve trim, head and drain cover go in. Grout and sealant cure before glass is measured. You’ll pick tile layout, niche placement and whether you want a built-in bench during this window, so have your finish choices ready before demo starts.
Stage 5: Glass, trim and walkthrough (days 7 – 10)
Tempered glass gets set, the room gets final caulk and trim, and we walk the whole thing with you. Our technicians have up to 12 years of experience on this exact sequence, and every conversion is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Royse City Conversion
The differences between a $3,500 conversion and a $10,000 one usually come down to four choices. Here’s the honest trade-off on each.
- Prefab pan and surround vs. tiled pan and walls. A prefab acrylic unit is the fastest and least expensive route, and it’s genuinely easy to clean. It also shows its age, and in a resale-minded Royse City subdivision it reads as builder-grade. A tiled pan with a tiled wall gives you a custom look and lasts longer, but it requires proper waterproofing and a skilled setter. That’s the difference between the low and middle of the range.
- Framed vs. frameless glass. Framed doors cost less and forgive small wall out-of-square. Frameless glass is the upgrade buyers notice, but it needs a dead-plumb wall and thicker glass, both of which add labor.
- Tile material. Porcelain runs modest per square foot and holds up to hard water and daily use. Natural stone costs more and needs sealing. For North Texas water, porcelain is usually the smarter call unless you’re chasing a specific look.
- Fixtures. A builder-grade valve and showerhead can be swapped for a Kohler trim kit without changing rough-in, and it’s one of the cheapest upgrades on the job. A rain head, hand shower or thermostatic valve adds a few hundred more.
- Niche, bench and grab bars. A recessed niche is a small line item that makes the shower usable every day. A bench adds framing and tile. Grab-bar blocking costs almost nothing if you ask for it during stage 2 and can’t be added cleanly afterward.
If you’re folding this into a larger project, our Bathroom Remodeling service covers the full-scope work: vanity, floor, lighting and paint around the new shower.
What Tub-to-Shower Conversion Costs in Royse City, TX

Plan on $3,500 to $10,000 for a tub-to-shower conversion in Royse City, with most jobs landing between $5,000 and $8,000. The number moves on five things:
- Footprint and layout. A straight swap in the existing alcove is the cheapest path. Expanding the shower into a closet or stealing space from an adjacent wall adds framing, drywall and finish work.
- Condition behind the wall. Rotted subfloor, soft studs or an old leaking valve turn a simple swap into a repair job. Expect $500 to $1,500 extra if the damage is real.
- Plumbing moves. Moving the drain or valve means rough-in work plus a plumbing inspection, and adds toward the top of the range.
- Material grade. Prefab vs. tiled. Framed vs. frameless glass. Builder trim vs. upgraded fixtures. Each one is a step up.
- Permit scope. A straight cosmetic swap may not require a plumbing permit. Moving the drain or relocating fixtures does, and the permit plus inspection adds both cost and calendar time.
A written estimate should list demo, framing, waterproofing, tile and setting materials, pan, drain, valve, glass, and disposal, with a line for permits if they’re required. What it typically won’t include: structural repair if we find hidden rot, tile upgrades you choose after signing, or glass ordered outside the standard sizes. We won’t surprise you with those later. The number you see is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 applies when the scope qualifies.
See the difference
Before
After
Before
After
Before
AfterWhat Royse City Homes Specifically Do to This Job
Royse City sits on the eastern edge of the DFW growth corridor along I-30, where former ranch land has been turning into subdivisions faster than inspectors and crews can keep up. That means the housing stock we work on here is overwhelmingly new construction from the last 15 to 20 years, plus scattered 1970s through 1990s ranch homes and acreage properties on the outskirts. The typical conversion we run is not a 40-year-old cast-iron nightmare. It’s a builder-grade tub and acrylic surround from 2005 that’s yellowed, cracked at the drain, or leaking quietly into the wall.
The local catch is the ground. Blackland Prairie clay under those subdivisions swells and shrinks with our wet-dry cycles, and that movement shows up inside the house as hairline cracks in tile and grout, and occasionally a shower pan that’s out of level. When we set a new pan, we check the subfloor for deflection before we tile, not after. We also know what the callback pattern looks like in younger subdivisions off I-30 and FM 548: work done fast during the build boom, and small shortcuts that only show up years later. That’s why a proper flood test and a full waterproofing layer stay non-negotiable on our jobs, no matter the price point.
ZIP 75189 covers the whole city, and we run conversions across Royse City from the older ranch properties on the outskirts to the newer streets off FM 548. If the project expands into something bigger, or you’re planning roofing work on the same house, homeowners often pair this with Metal Roofing in Royse City or discuss Tile Roofing in Royse City while the crew is on site. And when a tub swap becomes part of a full overhaul of the room, that work runs through Bathroom Remodeling in Royse City. See our full service area on the Royse City page.
Serving Royse City, TX – Our Local Coverage Area
We serve Royse City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Royse City

Most conversions in Royse City take 5 to 10 working days on site, from demo to final walkthrough. A straight prefab swap can finish in 4 to 5 days. A tiled pan with frameless glass and moved plumbing runs closer to 10, plus a day or two for glass fabrication.
You need a plumbing permit if the drain or supply lines move. A purely cosmetic swap in the same footprint often doesn’t need one. We tell you upfront which applies to your job and pull the permit ourselves when it’s required.
Yes, and that’s the most common approach. The existing 60-inch alcove converts directly to a 60-inch shower without moving the drain or the framing. It’s usually the fastest and least expensive route.
The range is $3,500 to $10,000, with most jobs landing between $5,000 and $8,000. Frameless glass, tiled walls and plumbing moves push toward the top of that range. Call (888) 426-8078 for an exact quote on your bathroom – estimates are free.
Every conversion we complete is covered by the 730-Day Done Right Promise: if the workmanship isn’t right, we come back and make it right. That covers the pan, tile, waterproofing and installation, not just parts.
Ready for a Free On-Site Estimate in Royse City?
Call (888) 426-8078 and a live person picks up, any hour. We’ll set a time to measure your alcove, check the subfloor and plumbing, and hand you a written line-item estimate with no surprises. Answer a few questions about your current tub, and we’ll tell you straight what a tub-to-shower conversion will cost for your Royse City bathroom.
Written by the team at Groundwork Construction Co.












