







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kitchen Design & Layout in Garland, TX: What It Costs and How It Runs
Kitchen design and layout work in Garland typically runs $14,000 – $45,000, with most of that going to cabinetry, counters, and the labor of moving walls or utilities. The job takes four to eight weeks from first measure to final walkthrough, and the layout decisions you make in week one drive about 70% of the final number. Call (888) 426-8078 to set up a free on-site estimate.
How a Garland Kitchen Design & Layout Job Actually Runs

We sequence this work in five stages, and each one has a decision attached to it. Knowing what you’ll be asked and when keeps the schedule honest.
Stage 1: Measure and feasibility (day 1, about 90 minutes)
We walk the kitchen, measure every wall to the inch, and photograph the electrical panel, plumbing stubs, and any load-bearing walls. You’ll tell us the two or three things about the room that bother you most. By the end of the visit you get a written line-item estimate with the range broken out by cabinet, counter, labor, and permit.
Stage 2: Layout options and selections (days 2 – 10)
You’ll see one or two layout drawings: usually a galley-to-L conversion, an island go or no-go, and a note on whether the sink has to stay where the drain is. This is when you pick cabinet door style and finish, counter material, and appliance widths. The biggest fork here is whether you keep the work triangle intact or relocate the range to gain wall space.
Stage 3: Permits and demo (days 10 – 17)
If walls move, plumbing relocates, or the panel gets upgraded, the city of Garland inspects the work, so we pull permits before a single cabinet comes out. Demo itself takes two to three days. We protect floors and set up a temporary sink if you’re living in the house during the job.
Stage 4: Rough-in, inspections, and drywall (days 17 – 30)
Framing, electrical, and plumbing go in first, then the rough inspection, then insulation and drywall. This stage is where a hidden surprise can cost a week. On older Garland ranches, an undersized panel or a floor that’s out of level shows up right here.
Stage 5: Cabinets, counters, and finish (days 30 – 56)
Cabinet boxes go in, then the template for stone counters (that’s a separate five-to-seven-day gap while the slab is cut), then install, backsplash, and appliance hookup. Final walkthrough happens after you’ve used the room for a few days, not before.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Shape a Kitchen Layout
- Galley vs. open L-shape: A galley is the most efficient layout per square foot and suits the narrow 1950s ranches near downtown Garland well. Opening to an L gains a peninsula for seating but eats floor area you may not have.
- Island or no island: An island needs roughly 42 inches of clearance on every side. In a kitchen under 150 square feet, a peninsula usually serves you better than a squeezed island.
- Cabinet grade: Painted MDF doors hold up fine in a low-traffic kitchen and cost less. Plywood boxes with solid-wood doors cost more and survive decades of daily use. KraftMaid is the line we most often spec when a homeowner wants a real warranty behind the cabinet.
- Counter material: Quartz and Cambria-style surfaces resist staining and need no sealing. Granite costs less per square foot but wants resealing every year or two. Laminate is the budget pick and shows wear at the sink first.
- Appliance widths: Standard 30-inch ranges and 36-inch refrigerators fit almost any layout. A 48-inch range forces cabinet rework and usually a stronger vent hood.
What Kitchen Design & Layout Costs in Garland, TX

Plan on $14,000 – $45,000 for a full design-and-layout job here, with the low end covering a cosmetic refresh and the high end covering wall relocation, new cabinetry throughout, and stone counters.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
| Full kitchen remodel (this page’s lead range) | $14,000 – $45,000 |
Five things push a job toward the top of that range. First, size: a 100-square-foot galley and a 250-square-foot open kitchen are different jobs. Second, existing condition, which on Garland’s older ranches often means a 100-amp panel that has to be upgraded. Third, whether plumbing or electrical relocates, since moving a drain adds labor and inspection. Fourth, material grade, where cabinet and counter choices alone can swing the number by $10,000. Fifth, permit scope, because structural changes require engineering and a longer review.
Our written estimate is upfront with no surprises: the number you see is the number you pay, and fixed pricing means no change orders for the scope we agreed on. Standard exclusions are appliance purchase, structural engineering fees, and any hidden rot or water damage found after demo, which we price before touching it.
See the difference
Before
After
Before
After
Before
AfterHow Garland’s Housing Stock Changes This Job
Garland is unusual because the building stock splits so sharply by era. In the older core around 75040 and 75041, near the original post-war subdivisions and downtown, we’re working in small single-story brick ranches with tight kitchens and kitchens whose electrical service is still 100-amp or fuse-era. That’s where a layout that looked simple from the curb turns into a real scope conversation. Out toward 75042 and the northern additions, the homes are 1970s-80s and later, with more square footage but sometimes odd, chopped-up layouts that design work can fix. The clay soils underneath all of it matter too: North Texas clay swells in wet springs and shrinks in dry summers, so an older kitchen floor can be out of level by the time we set cabinets. We check for that before bid, not after. And because Garland runs its own permitting and inspections, we pull the permits and pass the inspections as part of the job.
If you’re weighing the layout work against a wider project, see our Kitchen Remodeling in Garland page. Homeowners often pair kitchen layout work with Vanities, Tile & Fixtures in Garland or a small half-bath refresh, and we cover all of Garland including 75040, 75041, and 75042. Our Kitchen Remodeling service also covers similar layout work across the area.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Kitchen Design & Layout in Garland

Expect four to eight weeks from measure to final walkthrough. The cabinet and counter lead times are the long poles, and stone counter fabrication alone adds five to seven days between template and install. Call (888) 426-8078 to get a schedule for your specific kitchen.
Yes, if you move walls, relocate plumbing or electrical, or change the panel. Cosmetic swaps like cabinet fronts or counter surfaces generally don’t require one. We pull the permits and pass the inspections for you, and that’s built into the written estimate.
Often yes, and that’s the cheapest path. Keeping the sink on the existing drain and the range on the existing gas line lets you reorganize cabinets, add a peninsula, and gain real function without engineering or a drain relocation. We’ll tell you honestly whether the layout you want fits that constraint.
Most jobs land between $14,000 and $45,000. The low end covers a cosmetic refresh with new cabinets and counters; the high end covers wall relocation, full cabinetry, and stone. Call (888) 426-8078 for an exact quote, and the on-site estimate is free.
Every project is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Calls are answered by a live person around the clock, and our technicians are background-checked and arrive in uniform.
Get a Free Kitchen Design & Layout Estimate in Garland
Call (888) 426-8078 to schedule a free on-site estimate for kitchen design and layout in Garland. We’ll measure the room, look at the panel and plumbing, and hand you a written line-item price with no surprises. Live people answer the phone, day or night. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.












