







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum Fence in Mesquite, TX
An aluminum fence in Mesquite, TX, typically runs $28 to $52 per linear foot installed, and most residential yards here come in between $3,400 and $8,200 for a full perimeter. Aluminum is the fence we recommend when a homeowner wants a clean, ornamental look that holds its color through Texas summers without the repainting that wood or steel demands. It’s light, it won’t rust the way steel will, and it stands up to the clay-heavy soil and hard sun we get across Mesquite.
We install aluminum fencing for families who want a defined yard, a pool enclosure that meets code, or a decorative front boundary that boosts curb appeal without blocking the view. Whether it’s a 4-foot ornamental run along a front walk or a 6-foot privacy-height panel around a backyard in Creek Crossing, we build the layout around how you actually use the space. Every job is covered by our 730-Day Done Right Promise, backed in writing.
Before we get into detail, the short version: we bring the estimate, we set the posts, and we don’t leave until the gate swings right. For a free estimate on your property, call (888) 426-8078 and a live person will pick up, day or night. This page is part of our larger Fence Installation in Mesquite service, so if you’re still weighing materials, that’s the place to compare aluminum against wood, vinyl, and wrought iron.
Key Takeaways
- Aluminum fence in Mesquite runs roughly $28 to $52 per linear foot installed, depending on height, style, and gate count.
- Aluminum resists rust, holds factory finish for years, and needs far less upkeep than wood or steel.
- We handle layout, post setting, and gate alignment, and back the work with our 730-Day Done Right Promise.
- Calls are answered by a live person 24/7, and estimates are free.

When You Need Aluminum Fence
Aluminum isn’t the answer for every yard, but it’s the right call in a handful of situations we see constantly around Mesquite. Here’s what usually brings a homeowner to it.
- You want a clean front-yard boundary that doesn’t wall off the view. Ornamental aluminum gives you a defined property line and a finished look along the front walk without the solid wall effect of a 6-foot wood privacy fence. It’s a popular choice for homes in neighborhoods like Pecan Creek and Falcon’s Lair, where a picket-style front run reads as intentional rather than boxy.
- You have a pool and need a code-compliant barrier. Texas pool safety rules call for a barrier with self-closing, self-latching gates, and aluminum is one of the easiest materials to build that to spec. We set the gate hardware so it swings shut on its own and latches every time, which is exactly what an inspector checks.
- Your old steel or iron fence is rusting through at the welds. We regularly see steel fencing in older Mesquite subdivisions flaking and rusting at the base welds after a decade of humidity and hard sun. Aluminum won’t rust, so it’s a smart upgrade when you’re replacing failing metal.
- You want a low-maintenance boundary you won’t have to repaint. Wood needs sealing every couple of years and steel needs repainting. A powder-coated aluminum fence with a factory finish just needs an occasional rinse with a hose, which matters in a climate that bakes the color out of lesser materials.
- You’re defining a side yard, garden edge, or trash enclosure. Short aluminum runs and gates work well for corralling AC units, trash bins, or a garden bed without the heaviness of a full privacy fence.
- Your HOA has appearance rules. Many Mesquite-area HOAs require matching, uniform fencing or restrict certain heights and colors. Aluminum comes in standard colors and clean styles that clear HOA review far more easily than a mismatched wood patch job.
Our Aluminum Fence Process
Aluminum fencing looks simple until a post starts leaning or a gate starts dragging. The difference is in the prep and the setting, so here’s how we run a job from start to finish.
- On-site walkthrough and measurement. We come out, walk the property line with you, confirm heights and gate placement, and talk through style and color. We flag grade changes, buried irrigation, and property-line questions before anyone digs. You get upfront pricing, no surprises, at the end of that visit.
- Layout and utility check. We mark the post line, check for buried utilities so we don’t hit a line, and space posts to the panel system so the fence stays square and true. Getting this right up front is what keeps a year-old aluminum fence from looking wavy.
- Post setting. Aluminum panels are only as solid as the posts they hang on. We set posts in concrete at a proper depth for our local soil, which is known for shrinking and swelling with the wet-dry cycle. That’s the part most cheap installs skip, and it’s why their fences lean after a season or two.
- Panel and gate install. We mount the panels, hang the gates, and adjust hardware so every gate swings freely and latches cleanly, including self-closing pool gates where code requires them. We check racking on slopes so panels follow the grade instead of stair-stepping.
- Cleanup and final walkthrough. We haul off all debris and leftover material, then walk the finished fence with you so you can check every gate and panel yourself. If anything’s off, we fix it before we leave, and after that it’s covered by our 730-Day Done Right Promise.
Most aluminum jobs are completed in a single visit once material is on site, though a large perimeter with multiple gates can run into a second day. Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform. If you’re comparing this against a full rebuild, our main home page lays out how fencing fits into the broader work we do.

Aluminum Fence Pricing in Mesquite
Aluminum fence pricing in Mesquite usually lands between $28 and $52 per linear foot installed, and here’s the honest breakdown of what drives that number. We quote flat, upfront pricing, so the number you see is the number you pay.
| Item | Typical Range |
|---|---|
| Standard 4-ft ornamental aluminum (per linear ft) | $28 – $38 |
| 5-ft residential aluminum (per linear ft) | $34 – $44 |
| 6-ft privacy-height aluminum (per linear ft) | $40 – $52 |
| Standard walk gate | $275 – $475 |
| Self-closing pool gate with hardware | $375 – $650 |
| Double-drive gate | $850 – $1,600 |
| Removal and haul-off of old fence (per linear ft) | $3 – $7 |
What moves the price:
- Height and style. Taller panels and decorative picket or spear-top styles cost more than a basic flat-top run.
- Gate count and type. Gates are the most expensive single component. A pool gate with self-closing hardware costs more than a plain walk gate.
- Lot grade and length. A sloped or corner lot with more linear feet adds up, and racking panels on a steep grade takes more time.
- Old fence removal. If we’re pulling out an existing wood or steel fence, that’s a line item. Worth it to start clean.
- Underground obstacles. Roots, old concrete, or utility conflicts can add labor, so we flag these during the walkthrough rather than springing them on you later.
We offer three standing ways to make a larger aluminum fence project easier to budget: $1,000 off projects over $10,000, a free project estimate and design consult, and 0% financing for 18 months. For a lot with a full perimeter and multiple gates, those add up. Call (888) 426-8078 for an exact figure on your property, and estimates are free.
Why Aluminum Holds Up in Mesquite
Materials behave differently depending on where you live, and Mesquite’s climate is hard on fences. Summers push well past 100 degrees, the sun is relentless, and our soil swings from baked-hard to saturated when the spring storms roll through. That combination is rough on wood, which warps and needs resealing, and it’s rough on steel, which rusts where moisture sits in the welds.
Aluminum handles all of it better. It doesn’t rust, so the humidity and occasional standing water after a downpour won’t eat the base of your fence. A good powder-coat finish holds its color through the UV load that fades cheap materials within a few seasons. And because aluminum is lighter than steel, it puts less stress on the posts, which means less leaning as the soil moves. We set every post in concrete at the right depth to work with our expansive clay, which is the single biggest thing that separates a fence that stays plumb from one that doesn’t.
FAQs – Aluminum Fence
How much does an aluminum fence cost in Mesquite?
An aluminum fence in Mesquite typically costs $28 to $52 per linear foot installed, so a standard 150-foot residential perimeter usually runs about $4,200 to $7,800, with gates adding to that. The exact number depends on height, style, gate count, and whether we’re removing an old fence. Call (888) 426-8078 for a free, exact quote, and we’ll give you upfront pricing with no surprises.
Does an aluminum fence rust?
No, aluminum doesn’t rust. Unlike steel or wrought iron, aluminum forms a protective oxide layer and is finished with a powder coat, so it won’t rust out at the welds the way steel fencing does after years of Texas humidity. It may collect some dust and pollen, but a garden hose rinse is the most upkeep it needs. That’s a big part of why we recommend it for low-maintenance boundaries.
Can an aluminum fence meet pool safety code in Texas?
Yes, aluminum is one of the easiest materials to build a code-compliant pool barrier with, as long as the gates self-close and self-latch and the height meets local requirements. We set the gate hardware so it swings shut and latches on its own every time, which is what inspectors check. During your estimate we’ll confirm the height and gate setup your property needs. Call (888) 426-8078 to get that scheduled.
How long does it take to install an aluminum fence in Mesquite?
Most aluminum fence installations are completed in a single visit once the material is on site, and a larger perimeter with multiple gates can run into a second day. Post setting is the time-consuming part, since we set every post in concrete at depth for our local soil. We confirm the timeline during the walkthrough so you know exactly what to expect.
Is an aluminum fence cheaper to repair or replace?
For aluminum, repair usually wins when a single panel or gate is damaged, since panels are modular and we can swap one section without touching the rest. Full replacement makes more sense when posts have been compromised by a bad original install or the fence has been hit hard along a long run. We’ll tell you honestly which way the math points on your fence. Call (888) 426-8078 and we’ll take a look.
Can you install my aluminum fence this week?
Often, yes, depending on material availability and schedule. Because aluminum panels come in standard styles and colors, we can frequently get a simple residential run scheduled quickly, and a live person answers the phone 24/7 so you’re not waiting until Monday to find out. Call (888) 426-8078 and we’ll check the calendar and give you a date.
Ready to Get Your Aluminum Fence?
An aluminum fence is one of the few home upgrades that looks sharp on day one and still looks sharp five summers later. We build it to last and back it in writing, from the concrete under the posts to the latches on the gates. If you’re budgeting a larger project alongside your fencing, our standing offers of $1,000 off projects over $10,000 and 0% financing for 18 months apply, and your estimate and design consult are free.
Call (888) 426-8078 for a free estimate on your aluminum fence in Mesquite. A live person answers any hour, every day, and we’ll walk your property, give you upfront pricing, and set a date.
Written by the team at Groundwork Construction Co. of Mesquite, serving Mesquite.


