







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Melissa, TX: What It Costs and How Long It Takes
An aluminum fence in Melissa, TX typically runs $4,000 to $10,000 for a standard residential run, and most jobs wrap in three to five working days from layout to final walk-through. The number that moves depends on linear feet, grade, panel style, gate count, and how much site prep your clay soil needs before the first post goes down. Call (888) 426-8078 and we’ll talk through your property line and give you a real number, not a ballpark.
How We Run an Aluminum Fence Job, Stage by Stage

Aluminum fencing is a measured, sequenced job. Here’s the actual order of work so you know what to expect on your calendar and what decisions land on you.
Stage 1: On-Site Measure and Layout (Day 1, roughly 2 hours)
We walk the property line with you, mark corners, gates, and any offsets around trees or utility easements. This is where you confirm the fence line, the gate swing direction, and whether the run stops at the side yard or wraps to the rear. Any conflict with a survey pin or an old property marker gets flagged here, before we dig.
Stage 2: Utility Locate and HOA Sign-Off (Days 1 – 3, waiting period)
Before a shovel touches dirt, we call for utility locates. In Melissa’s newer subdivisions, that means coordinating with lines put in by the original builder and possibly a second utility trench. If your HOA requires a design submission, this is when it goes in. We won’t schedule the dig until the locate is clear and, where needed, the approval is back in hand.
Stage 3: Post Holes and Set (Day 3, usually one long day)
This is where Melissa’s soil earns its reputation. Blackland prairie clay swells and shrinks dramatically with moisture. Holes get dug to depth, and posts get set in concrete so movement doesn’t translate into a racked panel six months later. On a 150-foot run, expect this to consume most of a day with two people.
Stage 4: Panels, Posts, and Gates (Day 4)
Rails and pickets go up, gates get hung and adjusted for swing and latch, and we check every post for plumb. You’ll make one decision here if you ordered an arched gate or a decorative top rail, and we’ll confirm hardware and latch style on the spot.
Stage 5: Touch-Up, Cleanup, and Walk-Through (Day 5)
We touch up any scratches from handling, haul off packaging, and walk the full run with you to check alignment, gate operation, and finish. If you’re pairing the fence with a full Fence Installation in Melissa project that includes other runs or a matching side gate, this is the stage where the whole layout gets reviewed together. Our Fence Installation service covers the broader scope when aluminum is one piece of a larger yard plan.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Your Aluminum Fence
Aluminum fence isn’t one product. The grade and style choices you make now determine how it looks in year one and how it holds in year ten.
- Residential-grade vs. industrial-grade aluminum: Residential runs $4,000 – $10,000 and handles typical backyard duty. Industrial-grade panels run heavier (thicker walls, stronger welds) and cost meaningfully more. For most Melissa lots, residential-grade is the right call unless you’re fencing acreage or a pool enclosure.
- Powder-coat finish: Standard black or bronze powder coat holds up to North Texas sun and humidity better than a painted finish. Custom colors cost more and take longer to ship, but they let you match trim or an existing gate.
- Picket spacing and height: 4-foot is common for a decorative front yard boundary; 5-foot and 6-foot runs are typical for privacy and pool compliance. Tighter picket spacing costs more per linear foot and matters if you’re keeping small dogs in.
- Gate style: A single walk gate is standard. Double-drive gates, self-closing hardware, and arched top rails add cost and lead time. Decide gate placement before the post holes go in; moving a gate after Set is an expensive afternoon.
- Rackable vs. level panels: Sloped lots (common in newer Melissa subdivisions where grading is fresh) need rackable panels that follow the grade. Level panels cost less but leave gaps on a slope.
What Aluminum Fence Costs in Melissa, TX

Residential aluminum fence in Melissa runs $4,000 to $10,000, with most single-family backyard runs landing between $5,500 and $8,000. Here’s the line-item breakdown behind that number.
| Line Item | Typical Range |
|---|---|
| Aluminum fence, standard residential run | $4,000 – $10,000 |
| Gate (single walk gate) | $350 – $900 |
| Double-drive or custom arched gate | $900 – $2,400 |
| Post-setting in expansive clay (soil prep) | $200 – $800 |
| Permit and inspection fees | $75 – $300 |
Four things push a job toward the high end. Total linear feet is the biggest driver; a 200-foot run costs significantly more than a 100-foot run even before gates. Grade and picket spacing come next: industrial-grade with tight spacing is a different budget than residential with standard spacing. Gate count and hardware matter, particularly if you want self-closing or pool-code latches. And site conditions, including slope, tree roots, and how much soil stabilization your clay needs, can add real labor.
A written estimate from us includes the panels, posts, concrete, hardware, gate(s), labor, and cleanup. It does not typically include a survey (if a property line is in question, get one before we start), HOA architectural review fees, or removal of an existing fence unless we quote it separately. Upfront pricing, no surprises: the number on the estimate is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Melissa Homes Specifically Do to This Aluminum Fence Job
Melissa is growing fast, and most of what we fence sits in newer master-planned subdivisions where the house went up within the last two decades. That shape of housing stock matters for aluminum fencing in one specific way: fresh grading and blackland prairie clay. Unlike the sandier soils just east toward Princeton, clay here swells and shrinks hard with every wet and dry cycle, and a post set the way an out-of-town crew sets a post in sandy ground will heave. We set posts deeper and use concrete consistently across the run for that reason. It’s the difference between a fence that stays square through a wet spring and one that racks by August.
Permitting is another Melissa-specific step. Municipal codes here have shifted with the pace of new construction and don’t always mirror what a crew is used to in McKinney or Anna. Where a permit is required (typically for taller runs or pool enclosures), we pull it and pass inspection before we call the job done. If your HOA has architectural review requirements for new subdivisions, expect an approval step before digging. We work the run into the schedule around that. We cover the stretch from 75454 out toward the Sarah Brooks and Hunt Road corridors as part of our broader Melissa service area.
Homeowners often pair the fence with other exterior work while the yard is already torn up: Driveway Repair & Replacement in Melissa and Patios, Walkways & Pool Decks in Melissa are two projects that come up often alongside a new fence line, especially when a pool is going in and the enclosure needs to tie into a patio layout.
Serving Melissa, TX – Our Local Coverage Area
We serve Melissa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Aluminum Fence in Melissa

A typical residential aluminum fence in Melissa takes three to five working days on site, with the permit and utility locate adding a few days before we begin. Larger runs or jobs with complex gate layouts can run a week or more. Call (888) 426-8078 and we’ll give you a realistic date range based on your property line.
Permit requirements depend on fence height, location, and whether the enclosure surrounds a pool. Most standard residential runs don’t require one, but taller runs and pool enclosures typically do. We check the current municipal code before we pull anything, so you aren’t guessing. Call (888) 426-8078 to confirm what applies to your property.
In most cases, yes. Aluminum panels are lighter than wood or steel, and we can route the line around established trees, irrigation heads, and outbuildings with minor offset. If you have a pool or patio already in place, we plan the gate swing to clear it. Anything structural gets caught in the layout stage before we dig. Call (888) 426-8078 and we’ll walk your yard first.
Aluminum fence in Melissa runs $4,000 to $10,000. Vinyl typically lands in the same range at $3,500 to $9,000, while wood sits lower upfront but needs more maintenance over time. Aluminum wins on longevity and low upkeep in the North Texas climate. Call (888) 426-8078 for a line-item quote on your run.
Every aluminum fence job we do in Melissa is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. Manufacturer warranties on panels, finish, and hardware layer on top of that. Call (888) 426-8078 for the written warranty details before you sign anything.
Get a Free Aluminum Fence Estimate in Melissa
If an aluminum fence is on your list this season, start with a free on-site estimate. We’ll measure the run, walk the property line with you, and hand you a written, line-item number you can hold us to. Call (888) 426-8078. A live person answers around the clock, and we’ll get you scheduled for an estimate at your property in Melissa.
Written by the team at Groundwork Construction Co.












