







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Mesquite Homeowners Choose Toto Construction
Groundwork Construction Co. of Mesquite provides independent Toto service across Mesquite – from Drake fill-valve replacements to full bath remodels built around Ultramax II and Neorest footprints. What sets our Toto work apart is component-level knowledge: we know where Toto’s trim, fill and flush mechanics differ from generic plumbing, and we diagnose before we quote. We’re an independent construction provider. We are not authorized, sponsored or endorsed by Toto, and we tell you that up front. Our technicians have up to 12 years of experience, projects carry our 730-Day Done Right Promise, and a live person answers (888) 426-8078 any hour of the day.
Why Trust Groundwork Construction Co. of Mesquite for Your Toto Construction?

Toto fixtures show up in a large share of the bathrooms we remodel, so our trades see the brand’s actual parts week after week rather than once a season. A Drake two-piece uses a specific fill valve and flapper pairing. An Ultramax II one-piece sits on a streamlined base where the closet flange and wax ring have to land dead level. Washlet and Neorest units add control boards, seat heaters and pumps that reward a methodical diagnosis.
We specify genuine Toto fill valves, flappers, wax rings and Washlet components when the model calls for them. Quality aftermarket trim where it’s non-critical and the tolerances allow it. Work stays warranty-safe: no cutting into a Toto tank, no bypassing a control board with a mismatched universal part.
Hail season and clay soil aside, most Toto calls in Mesquite come down to parts wear and setting, and that’s where we start. The same crew protections apply here as on every job: background-checked, uniformed technicians and upfront pricing, so the number you see is the number you pay. Questions about a specific model are welcome before anything is scheduled – call (888) 426-8078.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Mesquite
- Drake two-piece (CST743/CST744) phantom running. A worn flapper and fill valve lets water leak past the seal, so the tank refills itself overnight and you find out at the water bill. Hard-water scale on the flapper seat speeds it up. Both parts are serviceable in a single visit.
- Washlet seat (S550e/S750e class) controls and heat failing. Years of mineral scale on the seat and wand assembly eventually reach the heater element and control board. Owners often assume the unit is dead; isolating the board or element usually tells a different story.
- Ultramax II gasket and wax-ring seepage at the flange. One-piece bases set on uneven or rebuilt bathroom floors can rock slightly, and the wax seal gives up at the flange. It shows as a faint odor or a soft spot near the base, not always as a visible leak.
- Neorest sensor and pump faults misread as a total failure. Integrated smart toilets throw codes or stop flushing cleanly, and the first instinct is full replacement. A serviceable sensor, pump or valve component is often the actual culprit.
- Rough-in and spacing conflicts during remodel. Moving a toilet wall or reworking a floor changes the rough-in dimension, and Toto’s one-piece models have less tolerance for a mis-set flange than a standard two-piece. This gets checked before tile goes down.
Toto Parts & Our Repair-vs-Replace Approach

Parts are sourced per job, not pulled from shelf stock. That means we match the exact fill valve, flapper, wax ring or Washlet component the model serial number calls for, and we tell you plainly when a genuine Toto part is the right call versus when a quality aftermarket trim piece is safe. A Toto toilet or Washlet is usually worth repairing. The exceptions are a cracked bowl, a truly dead control board with no replacement path, or integrated electronics that have failed beyond a serviceable component.
Our rule is simple: diagnose first, then quote. If a $40 flapper solves the running, we don’t sell a $900 toilet. Call (888) 426-8078 for a free estimate and we’ll walk you through the options before anything is ordered.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We pull the tank on a Drake or check supply and flange alignment on an Ultramax II, and on Washlet or Neorest units we isolate the control board, heater or pump before quoting. No guessing at a full replacement.
- 2
Repair or install. Genuine Toto parts where the model calls for them, with the closet flange checked for level and the wax ring set correctly. For remodels, the fixture footprint and rough-in are planned before demo.
- 3
Test and verify. Multiple flush cycles for running issues, heat and wash-cycle checks on Washlets, seal checks at the base for any seepage. We confirm the fix holds before we pack up.
- 4
Warranty in writing. Every project is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Mesquite
We work on the Drake two-piece family including CST743 and CST744 models, the Ultramax II one-piece elongated toilet, Washlet bidet seats in the S550e and S750e class, and Neorest integrated smart toilets. Our bath remodels are also built around Toto fixtures when a homeowner is upgrading: full bathroom remodeling, tub-to-shower conversion and bathroom vanity installation pair naturally with a toilet or seat upgrade, and the setout is planned so a one-piece base lands on a level flange from the start.
We Also Service These Brands
Groundwork Construction Co. of Mesquite is a multi-brand shop, not a single-brand one. Alongside Toto work, we install and service KraftMaid cabinetry, Kohler fixtures, GAF roofing systems and PGT windows, and we do it with the same component-level approach. That range means a Toto bathroom update can fold into a larger remodel without juggling three contractors.
FAQs – Toto Construction Service in Mesquite

Is Groundwork Construction Co. of Mesquite authorized by Toto? No. We’re an independent Toto service provider and are not authorized, sponsored or endorsed by Toto. We service Toto fixtures using our own trade knowledge and genuine or quality-compatible parts, and we say so plainly.
Do you use genuine Toto/OEM parts? Yes, on the parts that matter: fill valves, flappers, wax rings and Washlet components where the model calls for them. We use quality aftermarket only on non-critical trim, and we tell you which is which before the work starts.
How long does Toto service take? A fill-valve or flapper replacement on a Drake is typically done in a single visit. Washlet board or heater diagnostics and Neorest sensor or pump work can run longer depending on parts. For a planned bathroom remodel in Mesquite, the timeline is scoped per project. Call (888) 426-8078 to talk through your specific issue.
What Toto models/series do you cover? Drake two-piece (CST743/CST744), Ultramax II one-piece, Washlet bidet seats (S550e/S750e class) and Neorest integrated smart toilets. If you’re not sure which model you have, we can identify it from the tank or seat markings.
Will service void my Toto warranty? We work warranty-safe: no cutting into the tank, no bypassing control boards with mismatched universal parts, and genuine parts where the model requires them. That keeps your Toto coverage intact for anything the manufacturer still supports.
How much does Toto construction cost in Mesquite? Component repairs and fixture installs are quoted per job after diagnosis. When the Toto work is part of a bathroom remodel, the project ranges below apply. Call (888) 426-8078 for an exact quote – estimates are free.
| Toto-related project | Price range in Mesquite |
|---|---|
| Full Bathroom Remodeling | $9000 – $28000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Bathroom Vanity Installation | $800 – $3000 |
A typical Toto call starts with a Drake or Ultramax II that runs intermittently or a Washlet seat that stops heating, and the homeowner assumes the whole fixture is finished. A qualified local pro pulls the tank, checks the fill valve, flapper and supply, inspects the flange and wax ring for seepage, and on Washlets isolates the control board or seat element before quoting anything. The usual outcome is a component-level repair or, when the bathroom is being reworked anyway, a planned replacement that accounts for Toto’s one-piece footprint and rough-in.
Book Your Toto Service in Mesquite, TX
Mesquite’s older ranch bathrooms and storm-season schedules don’t wait, and neither should a running toilet or a cold Washlet seat. Call Groundwork Construction Co. of Mesquite at (888) 426-8078 to schedule your free estimate and design consult on Toto repair, replacement or a full bathroom remodel. A live person answers, day or night. Upfront pricing, 730-Day Done Right Promise, and 0% financing for 18 months on approved projects, plus $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Mesquite.












