







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBrick Paver Driveway in Mesquite, TX
A brick paver driveway in Mesquite typically costs $12 to $24 per square foot installed, which puts most two-car driveways in the $7,200 to $14,400 range. Clay brick and concrete pavers last 25 to 50 years, hold up to North Texas heat far better than poured concrete, and can be lifted and reset if a utility line ever needs work underneath. We build them on a properly compacted base with a polymeric joint sand, so the driveway doesn’t shift, rut, or shed pavers after the first triple-digit summer.
Groundwork Construction Co. of Mesquite handles the full scope, from excavation to final sweep, and backs the workmanship with our 730-Day Done Right Promise. If a paver settles or a joint fails inside that window, we make it right. Call (888) 426-8078 for a free estimate, and a live person answers any hour of the day. Brick pavers fall under our larger Driveway & Pavers in Mesquite service line, and this page covers everything specific to brick and clay pavers.
Why brick over concrete in Mesquite? Three reasons come up on almost every estimate. First, Mesquite sits on expansive clay soil, and clay soil moves with our wet-dry cycles. Poured concrete cracks under that movement; a flexible interlocking paver system rides it out. Second, our summers push surface temperatures high enough to fade and pit unstained concrete, while clay brick fired at over 2,000 degrees holds its color. Third, curb appeal. A herringbone or running-bond paver driveway reads as a genuine upgrade from the street, and appraisers in this market treat it as one.
We’re a full-scope home construction partner, not a paver-only outfit. That means one team handles grading, drainage, and any related hardscape work, and you’re not chasing three subcontractors when something needs to be corrected. All of it is covered from foundation to finish line under the same written guarantee.

When You Need Brick Paver Driveway
Most homeowners call us before the driveway becomes a real problem. These are the situations we see most often in Mesquite and the surrounding neighborhoods.
- Your concrete driveway has cracked or heaved. The clay soil under older Mesquite subdivisions, especially in the Mesquite Heights and Lawson Road areas, expands when wet and shrinks when dry. When a slab cracks along a control joint or heaves at a corner, patching rarely holds. A paver system with a proper base and joint sand flexes instead of fracturing.
- You’re planning a resale or refinance appraisal. A paver driveway is one of the upgrades that shows up immediately in curb-appeal photos. If you’re prepping a home in the $200K-plus range for market, the driveway is the first thing a buyer sees and one of the cheapest ways to lift the perceived value of the whole property.
- Drainage is pooling near the garage or foundation. Standing water after a storm is a graded-base problem, not a paving problem, but pavers are the moment to solve it. We slope the base away from the structure and can work a channel drain into the design so runoff goes where it should.
- You want a specific look, not a gray slab. Herringbone, running bond, basketweave, and circle patterns all read differently, and clay brick comes in reds, charcoals, tans, and custom blends. If the goal is a driveway that looks designed rather than poured, pavers are how you get there.
- Tree roots or utility work have broken up the surface. Pavers can be lifted, the problem fixed, and the same pavers reset. With concrete you’re pouring a new section and living with a visible patch. For any Mesquite property with mature pecans or oaks over the drive, that repairability pays for itself.
- An existing paver driveway has sunk, spread, or lost its sand. We reset and re-base failing paver driveways too. If the pavers are still in good shape, a reset with a rebuilt base and fresh polymeric sand brings the surface back without the cost of new material.
Our Brick Paver Driveway Process
The difference between a brick paver driveway that lasts decades and one that starts shifting in three years is almost entirely in the base and the compaction. Here’s how we build ours from the first cut to the final sweep.
- Site evaluation and layout. We measure the driveway, check the existing slope, look at where water runs off during a storm, and note any utility lines or tree roots in the path. We set the pattern, the border, and the grading plan before any material gets ordered. You get a written, no-hassle upfront price with no line items that appear after the fact.
- Excavation and base prep. We remove the old surface, excavate to the depth the base needs, and lay a geotextile fabric to keep subgrade soil from migrating into the base. Then we build up compacted crushed stone in lifts, wetting and compacting each one. This staged compaction is the part that gets skipped on cheap bids and the part that determines whether your driveway holds. Skipping it is how you get ruts in the first summer.
- Edge restraint and setting bed. We install a rigid edge restraint along both sides, pinned into the base, so the pavers can’t spread under load. A screeded layer of bedding sand goes over the compacted base to give the pavers a level, uniform set.
- Paver installation. We lay the brick pavers in your chosen pattern, cutting edges and around curves with a wet saw for a tight fit. Our technicians have up to 12 years of experience setting pavers, and every one arrives background-checked and in uniform. We use Belgard hardscape products where the design calls for them, alongside clay brick options, so you’re choosing quality, not just whatever’s in stock.
- Joint sand and compaction. We sweep polymeric joint sand into the gaps, wet it to activate the binder, and run a plate compactor over the finished surface to lock the pavers into the bedding sand. Polymeric sand resists washout and weeds far better than plain sand, and it’s standard on every job we do.
- Final walkthrough and cleanup. We walk the finished driveway with you, check the grade and drainage, sweep off the excess, and hand over care instructions. Then the 730-Day Done Right Promise starts, in writing.
Most brick paver driveways for a standard two-car width take two to four days on site, depending on square footage, pattern complexity, and how much base work the soil requires. Clay soil and mature trees can push that, and we tell you which before we start.

Brick Paver Driveway Pricing in Mesquite
Brick paver driveway cost in Mesquite runs $12 to $24 per square foot installed, with clay brick and premium concrete pavers at the higher end and standard concrete pavers at the lower. A typical 600-square-foot two-car driveway lands between $7,200 and $14,400. You get a free project estimate and design consult and an upfront price before anything is ordered, so the number you see is the number you pay.
| Line Item | Price Range in Mesquite |
|---|---|
| Old surface removal and haul-off | $2 to $5 per sq ft |
| Excavation, geotextile, and compacted base | $3 to $6 per sq ft |
| Clay brick or concrete pavers, material | $4 to $9 per sq ft |
| Labor and installation | $3 to $6 per sq ft |
| Edge restraint and polymeric joint sand | $1 to $2 per sq ft |
| Total installed | $12 to $24 per sq ft |
What moves your number up or down:
- Square footage and shape. Long straight runs price lower per square foot than tight curves and multiple cuts.
- Pattern complexity. A simple running bond installs faster than herringbone or a circular medallion, and labor reflects it.
- Base depth. Where clay soil or heavy vehicle loads demand a deeper base, excavation and stone costs rise.
- Drainage work. A channel drain or French drain addition is a separate line item.
- Edging and borders. A contrasting border band or a soldier course edge adds material and set time.
Larger remodels are easier to move on than the sticker price suggests. We offer 0% financing for 18 months and $1,000 off projects over $10,000, so a full driveway rebuild with drainage work can be spread out instead of paid in one lump. Call (888) 426-8078 for an exact quote. Estimates are free, the pricing is upfront, and a live person picks up around the clock.
Key Takeaways
- Brick paver driveways in Mesquite run $12 to $24 per square foot installed, or $7,200 to $14,400 for a typical two-car drive.
- Pavers flex with North Texas clay soil instead of cracking the way poured concrete does, and they can be lifted and reset when utility or root work is needed.
- Base prep and compaction determine how long the driveway lasts. That’s the step cheap bids skip, and it’s the step we don’t.
- Every install is backed by the 730-Day Done Right Promise, with 0% financing for 18 months and $1,000 off projects over $10,000.
- Calls are answered by a live person 24/7, and technicians arrive background-checked and in uniform.
FAQs – Brick Paver Driveway
How much does a brick paver driveway cost in Mesquite?
A brick paver driveway in Mesquite costs about $12 to $24 per square foot installed, so a 600-square-foot two-car drive runs roughly $7,200 to $14,400. Clay brick and premium pavers sit at the top of that range; standard concrete pavers at the bottom. Drainage work, pattern complexity, and base depth move the number. Call (888) 426-8078 for an exact quote. Estimates are free and the price is upfront.
Are brick pavers better than concrete for a Mesquite driveway?
For most Mesquite properties, yes. The clay soil here expands and contracts with our wet-dry cycles, and that movement cracks poured concrete while a flexible interlocking paver system rides it out. Pavers also hold color and surface through our summers better than unstained concrete, and any single paver can be lifted and reset if a root or utility line causes trouble. Concrete is cheaper up front. Pavers cost more to install but need less repair over the decades you own the home.
How long does a brick paver driveway take to install?
Most two-car brick paver driveways take two to four days on site. Excavation and base prep is usually the longest phase, and heavy clay or mature trees overhead can stretch the timeline. Pattern complexity and square footage matter too. We give you the expected schedule with the written estimate so there’s no guessing about how long your driveway is torn up.
Can you fix a paver driveway that’s sinking or spreading?
Yes. Sinking and spreading almost always trace back to a base that wasn’t compacted in lifts or an edge that wasn’t pinned properly. If the pavers are still sound, we lift them, rebuild the base, set a correct restraint, and reset the same materials with fresh polymeric sand. If some pavers are cracked, we match replacements where the color run allows. Call (888) 426-8078 and we’ll tell you whether a reset makes more sense than a full rebuild. Either way, estimates are free.
Do brick pavers hold up in Texas heat?
Clay brick pavers do. They’re fired at temperatures well above anything a Mesquite summer produces, so they don’t fade, chalk, or pit the way unstained concrete can. Concrete pavers with a quality color-through mix hold up well too. We recommend clay or high-grade concrete pavers for driveways specifically because they carry vehicle loads and full sun without surface breakdown, and every install gets polymeric joint sand that resists washout from our spring storms.
Ready to price out a brick paver driveway for your Mesquite home? Call Groundwork Construction Co. of Mesquite at (888) 426-8078 for a free project estimate and design consult. A live person answers 24/7, we walk you through the pattern and material options, and you get an upfront price with no surprises. Every driveway we build is backed by the 730-Day Done Right Promise. If it’s not done right, we make it right. Start with our Driveway & Pavers service page to see the full range of what we build, or call now and we’ll get your estimate on the calendar.
Written by the team at Groundwork Construction Co. of Mesquite, serving Mesquite.


