







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Royse City, TX: What It Takes and What It Costs
A chain link fence in Royse City, TX typically runs $3,500 – $9,000 for a residential property, and most acreage and subdivision jobs are set, stretched, and finished in 2 – 4 working days once materials land. The biggest swing in that number is linear footage and gate count, not the wire itself. Call (888) 426-8078 and we’ll give you a written, line-item estimate for your specific property line before anything gets ordered.
How we build a chain link fence, stage by stage

We run chain link jobs in a fixed sequence because skipping a step here shows up two summers later as a sagging top rail or a corner post leaning out of the ground. Here’s what actually happens on your property.
Stage 1: Site walk and layout (day 1, 1 – 2 hours)
We walk the property line with you and mark every corner, gate location, and terminal post with stakes and flagging. On Royse City acreage you’ll decide at this stage whether the fence runs inside the property line or right on it, and whether you want a drive gate wide enough for a trailer. We confirm depth to utilities before any digging; Texas law requires the 811 one-call before you break ground, and we schedule it. That clearance runs 2 – 3 business days, so it sets the real start date.
Stage 2: Demolition and clearing (day 1 – 2, 2 – 6 hours)
Old fence comes down and gets hauled away, brush and roots get cleared along the line, and we grade the run so the bottom of the fabric sits level. A chain link fence needs a clean string line; without it, the fence wanders visually over 100 feet. This is where a lot of fast-turnaround jobs in the newer subdivisions go wrong, because nobody cleared the line first.
Stage 3: Post setting (day 2, most of the day, then 24 – 48 hours of cure)
Posts go in concrete, sized by the fence height and wind load, with corners and gates braced against pull. We set 2-3/8″ line posts on standard residential runs and step up to heavier posts on tall runs or long stretches with no break. This is the one stage that can’t be rushed. Concrete needs to cure before you put tension on the fence.
Stage 4: Framing and stretching fabric (day 3, 4 – 6 hours)
Top rail, tension bands, and the chain link fabric go up and get stretched tight with a come-along, then cut and finished at the terminal posts. Gates get hung and adjusted so they swing level without dragging. This is where you’ll want to be present: check that gate clearance and confirm the swings match what you ordered.
Stage 5: Trim, tie-off, and walkthrough (day 3 – 4, 1 – 2 hours)
We install post caps, tie off the fabric, and walk the whole run with you to check alignment, gate operation, and closures. You get the written workmanship terms and the material spec sheet at this point. Most chain link jobs finish inside a single week of active work. Call or text (888) 426-8078 and we’ll give you a real start date and duration window.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The chain link options you’ll actually choose between
Chain link isn’t one product. What you pick here is what determines whether the fence lasts 10 years or closer to 20.
- Wire gauge and core: 11-1/2 gauge and lighter is the budget builder-grade option; 9 gauge is heavier wire that resists bending and dog pressure. On acreage with horses or large dogs, go heavier.
- Coating: galvanized steel is the cheapest and the most rust-prone in this climate; vinyl-coated chain link costs more up front and holds its color and finish much longer, which matters with our sun and humidity swings.
- Fence height: 4 ft is common for property-line marking; 5 – 6 ft is where most residential privacy and containment jobs land. Taller means bigger posts and more concrete, which moves the price.
- Top rail and post weight: 1-5/8″ top rail on light runs versus 1-7/8″ on longer or wind-exposed runs. Ask what’s being quoted; the difference is invisible after install but shows up when a rail kinks.
- Gates: walk gates versus drive gates, and manual versus cantilever-roller for wide openings. A 12 – 16 ft drive gate with a roller carriage runs several hundred dollars more than a swinging gate and doesn’t sag.
- Fabric mesh size: standard 2″ diamond mesh for general purposes; 1-3/4″ or 1″. Smaller openings for dog containment without adding a separate wire barrier.
Brand matters less than spec for chain link wire. Where we do point to brand partners, it’s on gates and hardware. If the fence is part of a full Fence Installation in Royse City package with wood or vinyl sections, we bring the matching systems together so the property lines look intentional. Our fence installation service handles the wider scope when you’re fencing more than one section.
What a Chain Link Fence costs in Royse City, TX

For a typical residential run, plan on $3,500 – $9,000. That’s the honest spread for properties in Royse City, and the range is wide because properties here vary a lot in size. Here’s what moves the number:
- Linear footage: the single biggest driver. A half-acre lot runs very differently from a 2-acre property line.
- Fence height and wire gauge: going from 4 ft galvanized to 6 ft vinyl-coated 9 gauge moves the price meaningfully over hundreds of feet.
- Corner and terminal posts: every angle and gate needs a braced post with an oversized concrete footing. A lot with many corners costs more than a straight run.
- Gate count and width: each drive gate is a separate hardware item; cantilever rollers cost more than swinging gates.
- Site conditions: rock at depth, roots to clear, slope to step, and old fence removal all add labor. Clearing an overgrown acreage line is real work.
A written estimate from us lists linear footage, post spacing, wire spec, gate hardware, and removal separately. It also tells you what’s excluded: utility relocation, landscape restoration, and grading beyond the fence line are the items that trip up “all-in” quote buyers.
See the difference
Before
After
Before
After
Before
AfterWhat Royse City homes specifically do to this chain link job
Royse City sits on the eastern edge of the DFW growth corridor along I-30, and that shapes almost every chain link project here. A lot of the work is on newer subdivisions between I-30 and FM 548 where the ground is Blackland Prairie clay that swells and shrinks through our wet-dry cycles. That clay moves posts. A chain link fence set into wet clay with undersized footings will loosen in the first two or three seasons. We over-size footings and set posts below the active clay layer on acreage properties, especially out toward the 75189 outskirts where the lots are bigger and drainage tends to run toward the fence line. On the 1970s – 90s ranch homes scattered around, we’re often replacing galvanized chain link that’s finally rusted through at the ground line; on newer lots we’re usually doing the first fence. Either way, the ground conditions are the difference. If you’re also redoing the approach, homeowners often pair this with Concrete Driveways & Concrete Work in Royse City or Asphalt Driveways & Resurfacing in Royse City so the gate landing and apron go in clean. We handle chain link across Royse City and the surrounding area.
Serving Royse City, TX – Our Local Coverage Area
We serve Royse City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in Royse City

Most chain link fence jobs in Royse City take 2 – 4 working days of on-site labor once materials arrive, and the 811 utility clearance adds 2 – 3 business days before we can dig. Larger acreage runs with multiple gates push toward the longer end. Call (888) 426-8078 for a real schedule window.
It depends on your lot and the fence height and location. Royse City requires permits for most fence work, and property-line fences need to respect setback requirements, so it’s worth confirming before install. We check the requirement for your address during the estimate so it’s not a surprise.
You can, but we don’t recommend it. On acreage, a fence built off an assumed line can end up a few feet onto a neighbor’s land, and moving it later means redoing the corner posts. A survey or a flagged property line saves that headache. We’ll tell you at the estimate whether the line is clearly marked.
Plan for $3,500 – $9,000 for a typical residential chain link fence in Royse City, depending on footage, height, wire gauge, and gate count. Call (888) 426-8078 for an exact quote; estimates are free.
Every chain link fence we install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, which means post setting, alignment, stretching, and gate hardware. Call today to go over the specifics for your property.
Get a free estimate for your chain link fence
If you need a chain link fence in Royse City, the next step is simple. Call (888) 426-8078 and a live person answers, any hour. We’ll ask about your property size, walk the line (or look at your plat), and send a written estimate with the spec and price broken out, no surprises. Background-checked, uniformed technicians run every job. Schedule your free estimate today.
Written by the team at Groundwork Construction Co.












