







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Wylie, TX: What It Costs and How Fast It Goes
Concrete driveways and concrete work in Wylie, TX typically run $4,500 – $12,000 for a new driveway, with most standard two-car pours landing near $7,500 – $9,500. Plan on 2 – 4 days from demolition to a driveable surface, then 7 days before you park on it. Call (888) 426-8078 and we’ll walk your slab, check grades and give you a written line-item number, free.
How our Wylie concrete driveway work actually runs, stage by stage

Concrete is unforgiving. Anything buried wrong shows up as a crack two summers later. So we sequence the job tightly and tell you what’s coming next.
Stage 1: Site walk and layout, day 1
We measure the existing apron, mark the new edges, and check where water currently runs. You’ll decide the width (10 ft minimum for a single car, 20 ft for a comfortable two-car), whether you want a flare at the street, and the finish. This is also where we confirm the utility locates. Everything gets marked on the ground before a machine touches it.
Stage 2: Demo and haul-off, day 1 – 2
Old concrete or failing asphalt comes out with a skid steer and goes straight into a dumpster. On a typical Wylie driveway that’s 4 – 8 hours. You’ll see bare subgrade by end of day, which is the only moment anyone can honestly judge what’s underneath.
Stage 3: Subgrade prep and forming, day 2
This is where the money hides. We cut out soft or organic soil, compact the base, then set forms and confirm the slope away from the garage. Wylie slabs sit on expansive clay, so we over-excavate and bring in select fill rather than pouring straight over native soil. Rebar or mesh goes in next, held on chairs so it lands mid-slab instead of on the dirt, where it does nothing.
Stage 4: Pour, screed, finish, day 3
A 20-by-20 slab is one pour, roughly 5 cubic yards, and the crew is on it for a half day. You’ll pick from a broom finish, a light salt finish, or saw-cut control joints. Joints are not optional in North Texas; they give the slab a place to crack on purpose.
Stage 5: Cure and clean-up, day 3 into week one
We pull forms, backfill edges, and leave the site swept. You stay off the surface for 7 days and keep vehicles off longer in cold or wet weather. Final walk-through happens then, and any touch-ups get handled before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The concrete choices you’ll make, and what each one really costs you
Concrete isn’t one product. The spec decisions below are the ones that actually change how the driveway performs ten years out.
- Standard 4-inch slab vs. 5-to-6-inch slab. Four inches handles foot traffic and passenger cars. If a half-ton pickup or a loaded trailer parks there regularly, go thicker. It’s the cheapest insurance on the ticket.
- Rebar vs. welded wire mesh. Rebar on chairs costs more and holds the slab together across cracks far better. Mesh is fine for a light-duty walkway; we don’t recommend it for a driveway in clay.
- Plain broom finish vs. decorative options. Broom is the value pick and grips well when wet. Exposed aggregate and stamped patterns cost more and need sealing to stay sharp; that’s a separate conversation with its own page.
- Standard gray vs. integral color. Color is mixed into the pour, so it won’t wear off like a topical stain. Worth it if the driveway faces the street.
- Saw-cut joints vs. tooled joints. Saw-cut gives cleaner lines and better crack control on larger pours. Tooled is cheaper and works fine on narrower slabs.
If you want the driveway to tie into a wider hardscape plan, the full scope lives on our Driveway & Pavers in Wylie page. This page stays on the concrete.
What Concrete Driveways & Concrete Work costs in Wylie, TX

New concrete driveway installation in Wylie runs $4,500 – $12,000. A full driveway replacement, where the old slab comes out first, sits at $5,000 – $14,000. Sealing an existing concrete drive is $250 – $700 and belongs on a maintenance schedule, not a repair schedule. Here’s the line-item shape of a typical quote:
| Line item | Typical range |
|---|---|
| Demo and haul-off | $600 – $1,800 |
| Subgrade prep and select fill | $500 – $1,600 |
| Forms, rebar, and pour (up to 400 sq ft) | $3,000 – $7,500 |
| Finishing and control joints | Included to $900 |
| Permit and inspection (where required) | $150 – $500 |
Five things push a Wylie job toward the high end: square footage past 400, a slope that needs a retaining wall or extra grading, heavy demolition (thick old concrete is slow to break), thicker slab and rebar spec for trucks, and any change to the apron at the street, which can trigger city right-of-way review. A written estimate lists what’s included line by line; what it typically doesn’t include is landscape repair past the pour zone or drainage work beyond the drive itself.
See the difference
Before
After
Before
After
Before
AfterWhat Wylie’s ground does to a driveway pour
Most of Wylie’s subdivisions were built on former pasture, and much of that land is blackland prairie clay that swells in our wet springs and shrinks hard through July and August. A slab poured with the same spec someone uses on sandy East Texas soil will crack within a couple of dry summers. That’s why we treat subgrade prep as the headline of the job, not the warm-up: over-excavate, bring in good fill, compact in lifts, keep the rebar off the dirt, and grade so water leaves the slab instead of pooling at the garage door. Wylie also sits squarely in the hail belt, and the same drainage discipline that protects the slab protects the foundation it abuts. HOA architectural review is standard in the newer subdivisions, and a color or width change usually needs approval before we form anything. Driveways at the street apron often need a permit; interior slab work typically doesn’t. Call (888) 426-8078 and we’ll confirm what your address requires.
Serving Wylie, TX – Our Local Coverage Area
We serve Wylie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Concrete Driveways & Concrete Work in Wylie

Two to four days for demolition, prep, and pour, then 7 days of curing before you drive on it. Weather is the main variable; rain during the pour means we wait.
Usually only when the work touches the street apron or public right-of-way; most interior slab and driveway replacement work doesn’t require one. We confirm the requirement for your specific address before forming.
Overlays exist, but on Wylie clay we don’t recommend them for a structural driveway. A failed base under an overlay just cracks the new layer from below.
Our workmanship is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction.
Not unless we hit something nobody could see, like buried debris or a failed utility line under the slab. Those get quoted in writing before we proceed, and the number you see is the number you pay.
Get your Wylie concrete driveway estimate
We’ll walk the site, check the grade and what’s under it, and hand you an upfront, line-item number in writing. No-hassle pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. Most homeowners pair the pour with a Garage Conversion ADU in Wylie or a New Detached ADU in Wylie, which means one coordinated site plan instead of two. Call (888) 426-8078 for a free estimate, or reach us through our Driveway & Pavers team and we’ll get your Wylie address on the schedule.
Written by the team at Groundwork Construction Co.












