







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Rowlett: What the Job Actually Involves
Custom & geometric windows in Rowlett typically run $8,000 – $25,000 for a full custom package, or $4,500 – $15,000 when the job is a partial replacement of a few shaped or oversized units. Plan on 3 – 6 weeks from template to install, because every arched, trapezoid, or radius unit is made to order. Call (888) 426-8078 and we’ll walk your opening sizes and give you a written number.
How the job runs, stage by stage

Custom and geometric work isn’t a stock swap. Nothing gets ordered until the rough opening is measured with a template, and that template drives everything downstream. Here’s the actual sequence we follow on Rowlett homes.
Day 1 – 2: Field measure and template
We measure every opening, then cut a physical template for each angled, arched, or trapezoid unit. A stock window needs a tape measure; a shaped one needs a plywood pattern the factory builds to. You decide the glass package (low-E, tempered where code requires it near doors and floors) and the interior finish at this stage, because both change the order.
Day 3 – 7: Engineering and order
Templates go to the manufacturer, who confirms the geometry against the frame style and sends back shop drawings. For lakefront homes or anything touching a structural header, we loop in the engineer the permit requires. You approve the drawings and the final glass and frame spec here. This is the decision point most homeowners underestimate: a change after the order is cut costs real money and restarts the clock.
Week 2 – 4: Fabrication
Shaped units are built to the template, not pulled off a shelf. Lead times run 3 – 5 weeks on most custom geometry and longer on specialty wood or large radius pieces. We schedule the install date against the delivery window so the crew isn’t waiting on a truck.
Install week: Demo, prep, set
We remove the old units, inspect the framing for rot or water damage, and repair any soft wood before setting new. Shaped windows get shimmed and flashed with care because the curves collect water differently than a rectangle. Most homes take two to four days of install depending on unit count.
Final: Trim, seal, inspect
Interior trim gets fitted to the new geometry, exterior gets sealed and flashed, and we walk the job with you before the final inspection. Anything that isn’t right gets fixed under our 730-Day Done Right Promise. You sign off once the inspection passes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
- Wood frame vs. fiberglass vs. clad: Wood gives you the warmest look and the most flexibility on tight radii, but it needs paint and attention in North Texas sun. Fiberglass holds shape well and handles the hail season, though it limits your finish choices. Aluminum-clad wood splits the difference: wood inside, weather-resistant outside, and the price sits in the middle.
- Glass package: Standard low-E handles most Rowlett homes. Tempered glass is required near doors and low sills. Laminated glass adds security and cuts sound from the lake wind, at a premium of roughly 15 – 25% on the unit.
- Geometry type: Arches and half-rounds are the most economical shapes. Trapezoids and custom polygons cost more because the factory cuts unique angles. Full radius and eyebrow units sit at the top of the price range.
- Interior finish: Paint-grade trim is the budget choice. Stained hardwood millwork matches older brick-veneer homes in Waterview and the Peninsula better and costs more, but it reads as custom.
What custom & geometric windows cost in Rowlett, TX

Expect $8,000 – $25,000 for a full custom package and $4,500 – $15,000 for a partial replacement, which lines up with our wider Windows & Doors in Rowlett pricing. Within that band, five things move the number:
- Unit count and shape complexity: One large radius unit can cost what three rectangles do. Each custom shape carries its own fabrication premium.
- Frame material: Fiberglass and clad cost more than vinyl; wood costs more still.
- Existing condition: Rot, settled framing, or water damage from a failed seal adds demo and carpentry time.
- Structural changes: Enlarging an opening or adding geometry where a wall was solid means a header, engineering, and a bigger permit scope.
- Glass and finish upgrades: Laminated glass and stained millwork each add to the total.
A written estimate from us itemizes each unit, the glass spec, trim, flashing, labor, and permit fees. It does not include surprises like a failing header found mid-demo; we stop and show you before we add anything. No-hassle upfront pricing means the number you see is the number you pay on the scope we quoted.
See the difference
Before
After
Before
After
Before
AfterWhat Rowlett homes specifically do to this job
Rowlett’s build-out matters here. Most of the housing stock is 1980s – 2000s brick-veneer in subdivisions like Waterview and the Peninsula, and those homes are now hitting the age where first-generation windows fail. We regularly see seal failures and fogged glass on that stock, plus hairline cracks in the surrounding brick where the original flashing was never detailed for our hail season. On the lake side, things get more involved: shoreline homes in the 75088 and 75089 ZIPs sit on blackland clay that swells and shifts, and a window set in a wall that has moved needs the framing checked before a custom unit goes in. Lakefront and floodplain rebuilds may also need Corps of Engineers or floodplain review depending on how close the work sits to the water. For a whole-room scope that pulls in framing, siding, and finish, this is often part of a full Windows & Doors project, and we cover all of Rowlett for it.
Serving Rowlett, TX – Our Local Coverage Area
We serve Rowlett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Rowlett

Plan on 3 – 6 weeks total: about a week for template and engineering, then 3 – 5 weeks of fabrication, then two to four days of install. The install itself is quick; the wait is the made-to-order piece. Call (888) 426-8078 to get your timeline in writing.
Yes, most shaped-window work needs a permit, and any change to the opening size or framing requires one even more clearly. We pull the permit and manage the inspection as part of the job. Call (888) 426-8078 and we’ll confirm the scope for your address.
Often yes, if the existing opening is already the right size and the framing is sound. Changing geometry, enlarging an opening, or adding a unit where a wall was solid does require a header and engineering. We’ll tell you which side of that line your job sits on after the field measure.
The range is $8,000 – $25,000 for a full package and $4,500 – $15,000 for a partial replacement, with shape complexity and frame material driving most of the spread. Call (888) 426-8078 for an exact quote, and estimates are free.
Every install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Manufacturer warranties on the units run separately and vary by brand. Call (888) 426-8078 and we’ll spell out both in your estimate.
Get a free estimate on your Rowlett windows
Call (888) 426-8078 to schedule a free on-site estimate for custom & geometric windows in Rowlett. We’ll template the openings, talk through frame and glass options, and hand you a written line-item quote with the permit and timeline spelled out. Live person, 24/7. Many homeowners pair this with Concrete Driveways & Concrete Work in Rowlett or Asphalt Driveways & Resurfacing in Rowlett while the crew is on site.
Written by the team at Groundwork Construction Co.












