







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Seagoville: What the Job Actually Involves
Custom & geometric windows in Seagoville usually run $6,800 to $22,000 for a typical order of four to eight shaped or non-standard units, and the work takes two to four weeks from template to final trim. The shape itself isn’t the hard part. Getting a true radius or trapezoid to sit square in a wall that’s moved on Blackland clay is the hard part, and that’s where most of the cost hides. Call (888) 426-8078 to set up a free on-site estimate. We’ll template, measure, and hand you a written line-item quote before anything is ordered.
How a shaped-window job runs, stage by stage

The sequence is longer than a standard replacement because nothing here is off the shelf. Arches, half-rounds, octagons, trapezoids, and full-radius units are built to order, so the front half of the job is measuring and the back half is fitting. Here’s what the calendar looks like.
Stage 1: Site visit and template (day 1, about 90 minutes). We measure every opening, photograph the existing frame and wall condition, and check how the wall is behaving – cracked brick veneer, out-of-level headers, or a slab that’s lifted an inch at the corner will all change how the window is shimmed and flashed. You decide the shape and the material line on this visit. We don’t order a custom unit off a rough number; the template is the number.
Stage 2: Template build and order (days 2 to 4). Physical templates go out with the order. This is the stage where a radius or segmented arch gets committed to a manufacturer and where the lead time starts – typically two to three weeks on shaped units, longer if you’re going with a premium wood-clad line. You’ll sign off on a drawing before production. Change a dimension after this point and you’re paying for a unit you can’t use.
Stage 3: Permit and inspection. Seagoville sits on the Dallas-Kaufman county line, so the first thing we do is confirm which county’s permitting regime governs your lot, and the permitting scope follows from that. Egress openings and any wall-structure changes get inspected. If your lot is on the Kaufman side of the line, the inspection calendar and the submittal path can differ from a neighbor’s lot a few blocks over. We don’t guess – we pull it correctly the first time and put the permit number in your file.
Stage 4: Demo and rough-in (one to two days per opening). Out comes the old unit, then the frame is squared, shimmed, and blocked. Geometric units need solid blocking at the arch spring line and at every angled corner, which is more framing than a rectangle ever needs. This is the messy phase. We protect floors and pull the room apart cleanly so your house isn’t a construction site longer than it has to be.
Stage 5: Set, flash, trim, and final inspection. The unit gets set plumb and level, flashed and sealed against North Texas storm-driven rain, then trimmed and finished inside and out. Final inspection follows, and you get a walkthrough where every opening is operated and checked in front of you. The whole job is also covered by our 730-Day Done Right Promise – if a unit is out of square, leaking, or binding within two years, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Custom and geometric work comes down to four decisions, and each one has a real trade-off. We’ll walk you through all of them at the estimate, but here’s the honest map.
- Frame material – vinyl vs. wood-clad vs. fiberglass. Vinyl is the budget pick and holds up fine to heat, but complex radii on vinyl are limited by what the extruder can bend, so sharp angles often force a different material. Wood-clad (we work with Andersen and Marvin lines) gives you the widest shape range and the best paint finish, at a higher cost and with more upkeep on the exterior. Fiberglass splits the difference – strong, stable in heat, and it doesn’t warp at a spring line.
- Glass package. Standard dual-pane is fine for most Seagoville homes. Low-E coatings and argon fill cut summer heat gain on west-facing arches, which matters when a big radius window turns a room into an oven by 4 p.m. in August. Tinted and laminated glass cost more and cut light – usually only worth it on a full-sun elevation.
- Grille and muntin design. True divided lites (real bars between panes) look period-correct on a mid-century brick ranch but cost meaningfully more than simulated divided lites. On a geometric unit, the grille pattern has to follow the curve, so this is a design decision you make with a drawing in front of you, not on the phone.
- Shape, size, and configuration. A half-round transom over a rectangular unit is the most cost-efficient way to get a curve. A full-radius arch, a segmented arch, an octagon, or a trapezoid gable window jumps the price because the frame, the glass cutting, and the flashing detail all get more complex. Corner and wrap-around units are the top of the range.
Hardware finishes are the small lever – a bronze or brushed-nickel handle set is a rounding error next to the glass. Spend the money on the frame and the flashing, not the handle.
What Custom & Geometric Windows costs in Seagoville, TX

Plan on $6,800 to $22,000 for most shaped-window projects here. A single arched accent window with standard glass sits near the low end. A full set of radius, trapezoid, and corner units with premium wood-clad frames and a full trim package pushes toward the top. Our written estimate breaks every line so you can see exactly what you’re paying for – upfront pricing, no surprises.
Five things move that number:
- Shape complexity. Half-rounds and rectangles are the cheapest; full-radius and segmented arches, octagons and trapezoids cost more per opening.
- Existing wall condition. A plumb, square header costs nothing extra. Cracked brick veneer or a header that’s dropped on a settled slab means added framing and repair before the unit can go in.
- Material grade. Vinyl at the low end, wood-clad and fiberglass above it.
- Whether the opening is new. Cutting a new opening in a solid wall costs more than replacing an existing window of the same shape, because it’s structural work plus patching.
- Permit scope and inspection. Egress and structural changes add permit and inspection cost; a same-size replacement in the same opening adds less.
What’s in a written estimate: units, tempered or standard glass per code, flashing, trim, interior finish, labor, permit fees, and haul-off. What’s usually not: painting or staining after install, drywall repair beyond the opening edge, and any structural repair a settled header reveals once we’re inside the wall. We list those as allowances, not surprises. If you’re reworking the surrounding exterior at the same time, homeowners often pair this with Concrete Driveways & Concrete Work in Seagoville to fix a cracked approach or pad while the access is open.
See the difference
Before
After
Before
After
Before
AfterWhat Seagoville homes specifically do to this job
Seagoville’s housing stock is a mixed bag, and it changes how shaped windows go in. The older core along US 175 is full of mid-century small brick ranches and 1970s-80s frame homes. Those houses have walls that have lived through fifty-plus years of Blackland clay movement, and that shows up as out-of-level headers and hairline brick cracks right where a new arch wants to sit dead square. On the newer tract subdivisions pushing out toward the east and south edges, the walls are straighter but the framing is tighter, so a radius unit needs solid blocking that the original wall didn’t plan for. Either way, the soil movement defines the job – a header that was fine when the house was framed isn’t necessarily fine now.
The county line adds a wrinkle you won’t hit in most suburbs. A lot on the Dallas side and a lot on the Kaufman side can have different permitting and inspection paths, and even some material specs can differ block to block. We sort that out before ordering, not after the inspector shows up. Heat matters too – a west-facing geometric window without a Low-E package will cook a room in the Seagoville summer, so we spec glass for the elevation and not just the look.
Serving Seagoville, TX – Our Local Coverage Area
We serve Seagoville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Seagoville

Two to four weeks from template to final trim is the normal range. The order and manufacture of shaped units eats most of that – typically two to three weeks once you’ve signed off on dimensions. Install itself is one to two days per opening. Call (888) 426-8078 for a calendar that fits your order.
It depends on whether the opening is new, whether the size changes, and whether egress or structure is affected – and on which county’s regime governs your lot. We confirm that before we order and pull the permit correctly. A same-size replacement in an existing opening usually needs less; a new shaped opening in a solid wall usually needs a permit and inspection. Call (888) 426-8078 and we’ll tell you what your address actually requires.
Often yes, sometimes no. Replacing an existing opening of the same shape and size generally avoids structural work. Cutting a brand-new arch or trapezoid into a wall means framing and header work, and if a wall happens to carry plumbing or wiring, that gets relocated. We check the wall on the first visit so you know which side of the line your job falls on. Call (888) 426-8078 for an on-site look before you commit to a shape.
Most jobs land between $6,800 and $22,000. A single arched accent window sits near the low end; a set of radius, corner, and premium wood-clad units pushes toward the top. The written estimate breaks out units, glass, framing, trim, permit, and labor line by line. Call (888) 426-8078 for an exact quote – estimates are free.
Every custom and geometric window job is backed by our 730-Day Done Right Promise – if a unit is out of square, leaking, or binding, we come back and fix it. If you want the wider exterior and interior scope handled at the same time, see our full Windows & Doors in Seagoville page, or browse Windows & Doors for the full service line. Call (888) 426-8078 to book.
Get a free estimate for shaped windows in Seagoville
If you’re looking at an arch, a half-round, an octagon, or a geometric window in a gable end, call (888) 426-8078 for a free on-site estimate. We’ll template every opening, check the wall and header condition, confirm which county’s permit rules apply to your lot, and hand you a written line-item quote with fixed pricing. A live person answers around the clock. We cover Seagoville and the surrounding area, and if you’re also resurfacing the approach, homeowners often pair this with Asphalt Driveways & Resurfacing in Seagoville.
Written by the team at Groundwork Construction Co.












