







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Mesquite, TX: What It Takes and What It Costs
Door installation in Mesquite typically runs $650 to $3,200 per opening, with most single exterior door replacements landing between $1,100 and $2,400. The job itself takes one day for a standard door, two to three days if we’re reframing an opening or matching a legacy rough-in. Call (888) 426-8078 and we’ll walk your house, measure every opening, and hand you an upfront written number before anyone picks up a tool.
How We Run a Door Installation from First Cut to Final Swing

Door work looks simple until you pull a 1962 frame out of a Mesquite ranch house and find the rough opening is three-quarters of an inch out of square. That’s why we sequence the job instead of rushing it.
Day 1, morning: measure and confirm
We re-measure every opening on site, check the wall for plumb and the header for sag, and confirm the door slab, frame, hardware, and finish you chose at the estimate. Homeowners decide the swing direction and hinge side here. If the existing frame is sound and square, we’re saving the trim and moving to demo within the hour.
Day 1, mid-morning: demo and prep
Out comes the old door, casing, and any rotted jamb. We probe the framing for water damage and termite activity, then shim and square the rough opening. On the brick-veneer homes common across Mesquite, we check the brick mold and flashing detail before anything new goes back in. Expect one to three hours depending on condition.
Day 1, afternoon: set and shim the frame
The new frame gets set, plumbed, and shimmed at the hinge and strike points. We check the gap around the perimeter and the swing before fastening. A door that binds here will bind forever, so this is the slow part of the day and we don’t rush it.
Day 1, late afternoon: hardware and weather seal
Knob, deadbolt, hinges, and threshold go on. We foam the perimeter, install the weatherstripping, and check the seal against a straight edge. Homeowners confirm hardware finish and handle style at this stage if they haven’t already.
Day 1 or Day 2: trim, caulk, and walkthrough
Casing goes back on, we caulk the exterior, and you get a walkthrough with the door opening, closing, and latching in front of you. Interior paint touch-up is usually the homeowner’s call, though we can fold it into the scope. That’s a standard one-day install; reframing, sidelights, or a double-door conversion push it to two or three days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Choose Between
Most of the decisions that affect price and longevity happen at the estimate, not on install day. Here’s what actually matters.
- Steel vs. fiberglass vs. wood exterior doors. Steel is the budget leader and holds paint well but dents. Fiberglass handles North Texas hail and sun better and comes in wood-grain textures that fool most people. Wood is beautiful and needs refinishing every few years in this climate. Fiberglass is what we recommend for most Mesquite front doors.
- Insulated core vs. solid slab. An insulated polyurethane core cuts heat transfer at the door, which matters in July. The upgrade adds $150 to $400 and pays back on energy bills.
- Prehung vs. slab replacement. Prehung units come with the frame and are faster to install. Slab replacement saves money when the existing frame is solid, but only when it truly is.
- Hardware finish and grade. A $40 knob and a $200 Kohler or Moen entry set both open the door. The expensive one still works smoothly in ten years. We match hardware across the exterior doors where the budget allows.
- Interior doors. Hollow-core slab doors are light and cheap; solid-core doors block sound and feel substantial. For a bedroom hallway, solid-core is worth the $80 to $150 per door premium.
Want to see finish options in person? We bring samples to the estimate so you’re choosing a door you’ve actually touched, not a picture in a catalog.
What Door Installation Costs in Mesquite, TX

Interior door installation in Mesquite runs $400 to $850 per door. Exterior door installation runs $650 to $3,200 per door depending on material, size, and whether we’re reframing. Here’s how the number breaks down.
| Item | Typical Range |
|---|---|
| Interior hollow-core door installed | $400 – $650 |
| Interior solid-core door installed | $550 – $850 |
| Standard exterior steel door installed | $650 – $1,400 |
| Fiberglass exterior door installed | $1,100 – $2,400 |
| Double exterior door installed | $2,000 – $3,200 |
| Framing repair / reframing an opening | $250 – $900 |
Five variables push a job from the low end to the high end. Size and configuration – a standard 36-inch door is the cheapest thing to install; a double or oversized door doubles the labor and hardware cost. Condition of the existing opening – rot, sag, or out-of-square framing adds reframing time. Material grade – a stock steel door and a custom fiberglass door with sidelights are two different budgets. Hardware and finish – entry sets, deadbolts, and matching finishes add up across a house full of doors. Permit scope – a like-for-like replacement usually doesn’t trigger a permit; framing changes and new openings do.
Your written estimate itemizes every line: door, frame, hardware, labor, disposal of the old door, and any framing or trim work. Permits, if needed, are pulled by us and listed as a line item. What we don’t include without a separate quote: interior paint touch-up, new casing if you want a different profile, and any rot or water damage we find behind the old frame once demo starts. We walk you through it before proceeding.
See the difference
Before
After
Before
After
Before
AfterWhat Mesquite Homes Do to This Job
Mesquite is a built-out, largely post-war inner-ring Dallas suburb, and nearly every door we install here goes into an existing opening – renovation, not new build. The city has been essentially fully developed since the 1980s, so the housing stock we work on is dominated by 1950s-to-1970s single-family ranches and brick-veneer tract homes, many now over 50 years old. That matters for door installation in a way it doesn’t on a new-construction site.
What we see: original jamb frames that have swelled and shrunk through decades of North Texas heat, and thresholds sitting on a slab that’s shifted on the black clay soil this area is known for. That clay swells and shrinks dramatically between drought and heavy rain, so slab movement flexes the wall and the door opening with it. We check for out-of-square framing on nearly every house in these neighborhoods before we commit to a quote. Homes along the I-30 and 635 corridors bring their own quirks – wind-driven rain from spring storms beating on the west-facing doors and degrading the exterior finish over time. Every one of those variables lives in the estimate, not in a surprise change order.
We work all across Mesquite, and homeowners often pair a batch of door replacements with Chain Link Fence in Mesquite or Vinyl Fence in Mesquite work if the fence is failing at the same time. If your door project is part of a full Windows & Doors in Mesquite update, we’ll scope the doors and windows together so the trim and casing line up. Our Windows & Doors service covers exterior door systems from entry sets to patio door replacements.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Mesquite

A standard door installation in Mesquite takes one day – typically four to six hours on site per door. Interior doors go faster, with three or four swapped in a day. Exterior doors with reframing or a double-door conversion run two to three days. Call (888) 426-8078 for a timeline that fits your specific project.
A like-for-like door replacement usually doesn’t require a permit, but new openings or structural framing changes do. We pull every required permit and pass the inspection. Call (888) 426-8078 and we’ll tell you whether yours needs one before we quote.
Yes, in most cases. A standard door replacement swaps the door and frame within the existing opening, so no plumbing or structural work is touched. Only when the wall itself needs to be changed does the scope grow. Call (888) 426-8078 and we’ll confirm what your opening needs.
Every door installation we do is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (888) 426-8078 to get your estimate on the books.
Most front door replacements in Mesquite run $1,100 to $2,400, with fiberglass doors carrying the best long-term value in this climate. Steel is cheaper upfront but dents and dings more easily. Call (888) 426-8078 and we’ll quote your exact door with no surprises.
Get Your Free Door Installation Estimate
Call (888) 426-8078 to schedule a free on-site estimate for door installation in Mesquite. We’ll measure each opening, show you material samples, walk through the timeline, and hand you an upfront written quote with no-hassle pricing – the number you see is the number you pay. A live person answers the phone, 24/7. Estimates are free and include full consultation.
Written by the team at Groundwork Construction Co..












