







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Wylie, TX: What the Job Actually Involves
Impact windows and doors in Wylie typically run $8,000 to $25,000 for a full-house package, with most single-family homes landing between $12,000 and $18,000. The work itself takes one to three days once materials are on site, though the order-and-permit runway usually adds three to six weeks. That gap between “signed” and “installed” is where most homeowners get surprised, so it’s worth understanding before you commit. Call (888) 426-8078 to schedule a free on-site estimate and we’ll put real numbers on your specific openings.
How We Run an Impact Window & Door Job, Start to Finish

Impact work is different from standard replacement because the units are heavier, the anchoring is more demanding, and the flashing detail has to be right the first time. Here’s the sequence we follow on every Wylie job, with realistic timing for each stage.
Stage 1: Measure and Product Selection (Days 1-3)
We measure every opening, note the wall construction (brick veneer over frame, which is what most Wylie subdivisions have), and confirm which units are fixed versus operable. You’ll decide the product line, glass package, frame color, and whether any door is a sliding glass or hinged patio type. This is the only stage where your decisions slow the job down, so it pays to have a rough budget in mind before we arrive.
Stage 2: Order, Permit, and Lead Time (Weeks 1-6)
Impact units are built to order. Standard colors and sizes run three to five weeks; custom colors or non-standard sizes can push to eight. If your subdivision requires HOA architectural review (many in Wylie do, particularly the newer phases), we submit the product spec sheet and elevation drawing early so approval doesn’t stall the install. The permit application goes in parallel.
Stage 3: Prep and Demo (Day 1 of install)
We protect floors and furniture, remove interior trim, and pull the old units. On brick-veneer homes the exterior opening gets cleaned back to sound substrate. Expect noise and dust on this day; plan to be out of the work rooms if you can.
Stage 4: Setting, Flashing, and Sealing (Days 1-2)
New units go in with shims, anchors, and a continuous flashing detail at the head and sill. This is where impact work earns its keep. A window that’s set poorly will leak in a driving storm regardless of how good the glass is. We seal the interior and exterior perimeter and check every operable sash for smooth travel.
Stage 5: Trim, Inspection, and Walkthrough (Day 3)
Interior trim goes back, exterior caulk gets tooled, and we walk the job with you, opening and closing every unit so you know how it should feel. The municipal inspection follows. You get the product warranty paperwork and our 730-Day Done Right Promise on the installation itself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Your Real Choices: Glass, Frame, and Door Configuration
Most of the cost and performance difference lives in three decisions. Here’s the honest trade-off on each.
- Glass package. A single-pane impact unit meets the windborne-debris standard and costs the least. A laminated insulated unit (double-pane with a laminated inner lite) adds roughly 15-25% but cuts heat gain and outside noise noticeably, which matters on two-story homes where bedrooms face the street.
- Frame material. Vinyl is the value pick and holds up fine in North Texas heat. Aluminum is slimmer and stronger for large openings but conducts heat, so it needs a thermal break to perform. Fiberglass sits between them on price and moves less with temperature swings.
- Door type. Hinged entry doors with impact-rated glass and a multi-point lock are the strongest option for front doors. Sliding patio doors are the common choice for rear access and cost less per square foot than a wide hinged pair, but the track needs regular cleaning to stay smooth.
- Operable vs. fixed. Fixed picture units cost less and seal better. Casement and awning windows open for ventilation and are the usual pick for bedrooms and kitchens.
We work with Andersen and Marvin on the window side, and both carry impact-rated lines that hold up under Wylie’s hail exposure. If the project expands to a full exterior refresh, that’s part of a full Windows & Doors in Wylie scope and we can price it together.
What Impact Windows & Doors Cost in Wylie, TX

Expect $8,000 to $25,000 for impact windows and doors in Wylie. A single-story home with eight to twelve openings typically lands in the $12,000-$16,000 range. Larger two-story homes with twenty-plus openings and a sliding patio door push toward the top of the band.
What Moves the Number
- Opening count and size. This is the biggest lever. Each additional unit adds real cost, and large picture windows cost more per unit than standard double-hungs.
- Glass package. The laminated insulated upgrade adds 15-25% over single-pane impact glass.
- Frame and finish. Custom colors and fiberglass or aluminum frames push higher than white vinyl.
- Door complexity. A hinged impact entry door with multi-point hardware costs more than a standard window of similar size.
- Access and height. Second-story openings on a two-story Wylie home require staging and sometimes a lift, which adds labor. Tight side-yard access (common in the denser subdivisions off FM 544) can add setup time.
What’s Included and What Isn’t
Our written estimate covers units, labor, flashing, sealing, interior trim reinstall, permit, and haul-away. It does not cover structural repairs if the opening is found to be out of square or rotted once demo begins, nor does it cover painting or staining of trim. We flag those possibilities before you sign so there are no change-order surprises mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Wylie Homes Specifically Do to This Job
Wylie has grown from a small Collin County farm town into one of the fastest-growing suburbs in the Dallas metroplex, and that growth shows up in the housing stock we work on. Most of what we install impact units into is 2000s-to-present single-family construction, brick veneer over frame, two-story, post-tension slab-on-grade. These homes were built fast during the boom, and we regularly find openings that are slightly out of square once the old units come out, which means a bit more shimming and trim work than the initial spec anticipated.
The other thing that shapes this job is hail. Wylie sits in the hail-and-tornado belt, and impact-rated glass isn’t just a storm-season nicety here; it’s a real buffer against the kind of hail that dents siding and cracks standard windows every few years. We see plenty of homes near downtown Wylie on FM 544 and Highway 78 where a mid-century ranch still has its original single-pane units, and those are a different job: the framing is sound but the openings are non-standard, so expect custom sizing. If you’re weighing a fence upgrade while the exterior is torn apart, homeowners often pair this with Aluminum Fence in Wylie to finish the yard at the same time.
On the permitting side, Wylie follows Collin County practice for residential window replacement, and HOA architectural review is common in the newer subdivisions. We handle both submissions and pull the permit as part of the project so the inspection doesn’t get scheduled after the crew has already packed up. Our Wylie service area covers the full ZIP 75098 footprint, including Sachse and Rowlett-adjacent neighborhoods, and our Windows & Doors team coordinates with the same installers on every job.
Serving Wylie, TX – Our Local Coverage Area
We serve Wylie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Impact Windows & Doors in Wylie

One to three days on site for a typical Wylie home, plus three to six weeks of lead time for the units to be built and the permit to clear. A smaller job with standard sizes and colors runs faster. Call (888) 426-8078 for a timeline on your specific openings.
Yes, residential window and door replacement in Wylie requires a permit and a municipal inspection. We pull it as part of the project and schedule the inspection after install. You don’t have to file anything yourself.
In the vast majority of Wylie homes, yes. The units are sized to the existing openings, and we don’t touch plumbing or framing unless a rotted sill or out-of-square rough opening turns up during demo. We walk you through that possibility before signing.
Most full-house packages land between $12,000 and $18,000, with a range of $8,000 to $25,000 depending on opening count, glass package, and door type. Call (888) 426-8078 for an exact quote; estimates are free and come with a written line-item breakdown.
Two warranties apply: the manufacturer’s product warranty on the glass and frame, and our 730-Day Done Right Promise on the installation. If a unit leaks or a sash stops operating correctly within that window, we come back and make it right at no charge. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
Get a Free Impact Window & Door Estimate in Wylie
If you’re ready to price impact windows and doors for your Wylie home, call (888) 426-8078. We’ll schedule a free on-site visit, measure every opening, and give you a written line-item estimate with product options and financing laid out. A live person answers around the clock, every technician is background-checked and uniformed, and the price you sign is the price you pay. When the exterior is already open, this is also the moment to consider an Iron Fence in Wylie to complete the perimeter.
Written by the team at Groundwork Construction Co.












