







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Seagoville, TX: What They Cost and How Long They Take
A patio, walkway or pool deck in Seagoville usually runs $3,500 – $11,000 for a paver patio, with walkways and pool surrounds priced by the square foot inside that band, and most jobs finish in 4 to 10 working days once materials are on site. The first thing that decides your number is whether the slab underneath is stable. Seagoville’s expansive Blackland clay moves, and a paver surface is only as flat as the base you build it on. Call (888) 426-8078 for a free on-site estimate – we’ll walk the yard, check the soil and drainage, and give you a written line-item quote.
How We Build a Patio, Walkway or Pool Deck in Seagoville, Stage by Stage

Day 1: Layout, Utilities and the Dig
We start by stringing the actual footprint and confirming it against your house, fence line and pool equipment pad – the drawing and the yard rarely match exactly. Before anything gets dug, we call for utility locates and confirm where irrigation lines, downspout discharges and any pool plumbing run. Then we strip the existing grass, old concrete or failing pavers and haul it off. Expect one full day for a typical backyard patio; a long walkway to the street can eat part of a second.
Days 1 – 2: Subgrade and Base Prep
This is the stage that separates a patio that lasts from one that heaves in three summers. We excavate to depth, compact the subgrade, then build up a graded crushed base in lifts, compacting each one. On the clay lots around Seagoville we pay close attention to slope away from the house and pool – ponding water on a pool deck is the number one post-install complaint we get called about. You’ll decide here whether you want a drainage channel or French drain included.
Day 2 – 3: Edge Restraint and Base Inspection
Before a single paver goes down we set the edge restraint, which is what keeps a patio from spreading over time. If the project touches a structure or requires a permit (more on that below), this is when the base gets inspected. You don’t have to be present for this – we send photos – but it’s the natural checkpoint to confirm any changes to shape or size before materials are committed.
Days 3 – 7: Setting the Pavers or Pouring
Paver work goes down fast once the base is right: a 300-square-foot patio is typically a two-day set. Pool decks take longer because of cutting around the coping and skimmer lids, and walkways go quicker because there’s less cut work. If you chose stamped concrete instead of pavers, this stage is the pour, the stamp and the cure – and cure time at Seagoville summer temperatures means we may cover and protect the pour for a day before you walk on it.
Days 7 – 10: Joint Sand, Sealer and Final Walkthrough
We sweep polymeric joint sand into the pavers, compact it in, and apply sealer if you opted for it. Sealer is optional; it deepens color and slows staining, but it also needs reapplication every few years. The last step is a walkthrough where we check slope, edges, cuts and drainage with you and hand over care instructions. That’s also when your 730-Day Done Right Promise coverage is explained in plain terms.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Patios, Walkways & Pool Decks
The material decision drives both the look and the price, and each option has an honest trade-off worth knowing before you commit.
- Concrete pavers (the workhorse): Belgard and similar lines give you the widest color and pattern range, they’re repairable – lift a cracked unit and swap it – and they handle Seagoville’s clay movement better than a rigid pour because the joints flex. Downside: joint sand needs topping up and weeds can work into unsealed joints.
- Stamped concrete: Cheaper per square foot up front and gives a clean, seamless look. The trade-off is cracking – on expansive clay, a stamped slab is more likely to crack than pavers, and a crack in stamped concrete is permanent and visible.
- Natural stone (flagstone, travertine): The premium choice, especially around a pool where travertine stays cooler underfoot than concrete in July. It costs more and flagstone is heavier, so base prep has to be more precise.
- Polymeric vs. regular joint sand: Polymeric sand costs more but locks in and resists washout during our spring storms. For pool decks and any sloped walkway, it’s worth it.
- Sealer or no sealer: Sealing protects color and makes cleaning easier, but it’s a maintenance item, not a one-time finish.
- Drainage add-ons: Channel drains, French drains and dry creek beds are the difference between a deck that sheds water and one that pools it at the pool edge.
If your hardscape is part of a larger exterior plan, homeowners often pair this with Driveway & Pavers in Seagoville so the driveway, walkway and patio share one material family and one crew. You can also see the full scope of our Driveway & Pavers service if you’re weighing a bigger front-and-back hardscape project.
What Patios, Walkways & Pool Decks Cost in Seagoville, TX

Most paver patio work in Seagoville lands between $3,500 and $11,000, and a walkway or pool deck sits inside that same band based on square footage and cut complexity. Here’s the line-item view of what moves the number.
| Item | Typical Range |
|---|---|
| Paver patio install (base, set, joint sand) | $3,500 – $11,000 |
| Walkway (per linear foot, cut work included) | Priced within the patio band by square foot |
| Pool deck surround (coping cuts, skimmer boxes) | Top of the patio band |
| Optional sealer | Add-on, quoted separately |
| Drainage channel or French drain | Add-on, quoted separately |
Five variables push a job to the low or high end. Size is the obvious one – 200 square feet versus 600. Existing condition matters: tearing out old concrete or failing pavers costs more than building over grass. Site access – a narrow side gate means wheelbarrow hauling instead of a skid steer, which adds labor. Material grade separates a standard paver from natural stone or premium Belgard lines. And drainage and permit scope decides whether you’re adding channels or pulling permits. Your written estimate lists base prep, materials, labor, edge restraint, joint sand and haul-off. It won’t include sealer, drainage add-ons or unforeseen utility relocation unless we’ve flagged them, and we flag them before we start, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Seagoville Homes Specifically Do to This Job
Seagoville sits on the Dallas – Kaufman county line, and that line changes the paperwork on your patio more than most homeowners expect. A lot on one side of the corridor may need permits and inspections through one county while a lot a few blocks away goes through the other, with different submittal requirements and sometimes different material specs. Add the Blackland Prairie’s expansive clay and you get the failure mode we see most: a patio or pool deck that was poured or set on an under-prepped base and has since heaved, cracked, or dropped at the pool edge. The housing mix feeds it – the older brick ranches and 1970s – 80s frame homes along the US 175 core often have settlement around the slab that shows up first in the hardscape, while the newer tract subdivisions on the east and south edges typically call for a fresh build where getting the base and drainage right the first time is the whole game. Spring storm season and North Texas drought-flood swings mean we schedule base work around the rain and protect fresh pours from the July heat.
We work patios, walkways and pool decks across Seagoville and the surrounding corridor, including Balch Springs, Mesquite, Sunnyvale and Rowlett.
Serving Seagoville, TX – Our Local Coverage Area
We serve Seagoville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Patios, Walkways & Pool Decks in Seagoville

A typical patio or set of walkways takes 4 to 10 working days from demo to final walkthrough, with pool decks and larger jobs landing at the longer end. Weather and base conditions can stretch that, especially during spring storm season. Call (888) 426-8078 and we’ll give you a realistic schedule for your yard, not a generic one.
It depends on which side of the Dallas – Kaufman county line your lot sits on and whether the project touches a structure, drainage or utility. A simple ground-level patio often needs no permit; anything tied to a pool, retaining wall or structure usually does. We confirm the requirement before work starts and handle the submittal – call (888) 426-8078 to have us check your address.
Yes, in most cases. We lay out the footprint around your pool equipment, irrigation and downspouts without relocating them. When a line does sit in the way, we quote the relocation up front so there’s no surprise mid-job – call for a site visit and we’ll tell you exactly what’s involved.
A pool deck typically runs at the top of the $3,500 – $11,000 patio band because coping cuts and skimmer boxes add labor and cut work. Call (888) 426-8078 for an exact quote – estimates are free and written line-item.
Every patio, walkway and pool deck we build is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Paver and material warranties come from the manufacturer on top of that. Call (888) 426-8078 to review coverage for your specific project.
Get a Free Estimate for Patios, Walkways & Pool Decks in Seagoville
Call (888) 426-8078 and a live person answers, any hour. We’ll set a time to walk your yard, check the soil, slope and drainage, and talk through paver, stamped or stone options for your budget. You get a written line-item estimate with the exact number you’ll pay, no change orders, and the 730-Day Done Right Promise behind the work. Estimates are free, including design consultation.
Written by the team at Groundwork Construction Co.












