







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Sunnyvale, TX: What to Expect
Patios, walkways & pool decks in Sunnyvale, TX typically cost $3,500 – $11,000 for a paver patio, with most walkways and pool surrounds landing inside that band depending on square footage and material. A standard patio runs one to two weeks from demo to final sealer; a pool deck with drainage corrections and a new walkway network can stretch to three. Call (888) 426-8078 for a free on-site estimate with a written line-item quote.
How We Build Patios, Walkways & Pool Decks Here: The Process

No two Sunnyvale properties behave the same, so the sequence below is a framework, not a script. Here’s what actually happens, stage by stage, and what you’ll be deciding along the way.
Stage 1: Site walk and layout (day 1)
We mark the footprint with paint and stakes so you can walk the patio or pool surround at real size before anything is cut. This is where you commit to shape, slope direction, and where the walkway ties into the house. On acreage lots off the rural edges, we also map drainage away from the slab and any shop or outbuilding pads, because water has farther to travel and fewer places to go.
Stage 2: Demo and base prep (days 2 – 4)
Existing concrete, old pavers, or failed decking comes out, then we grade and compact. The base is where these jobs live or die in North Texas clay: we excavate deeper than you’d expect, lay compacted crushed stone in lifts, and check slope with a level at each pass. A paver patio set on a thin base looks fine for a season and then heaves. That’s not a shortcut we take.
Stage 3: Drainage and utilities (days 3 – 5)
If the patio or pool deck needs a French drain, channel drain, or a run to daylight, it goes in now, before pavers. Pool deck work often means coordinating with pool equipment placement and existing skimmer lines. If the project touches a detached shop’s power or water, that gets trenched and inspected in parallel.
Stage 4: Setting the surface (days 5 – 9)
Pavers go down over the compacted base, cut tight at the house and pool coping, with edge restraint and polymeric joint sand. Stamped concrete or poured borders, if you chose them, cure on their own schedule. Pool coping gets set first so the waterline stays level.
Stage 5: Sealing, cleanup, and walkthrough (days 9 – 12)
Sealer goes on after curing, we run a magnet sweep for stray nails and cuts, and we walk the job with you. Any punch-list item gets logged in writing. The work is backed by our 730-Day Done Right Promise: if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Define a Patio, Walkway, or Pool Deck
Material and grade drive most of the decision, and you’re choosing between a handful of real options:
- Concrete pavers (Belgard and similar): $3,500 – $11,000 for a typical patio. Best all-around value, holds up to freeze-thaw and clay movement better than poured concrete because individual units flex, and repairs are local rather than a full pour. Deep color and shape range.
- Stamped concrete: Lower cost per square foot than pavers but cracks show and repairs are visible. Works well on a covered patio or a walkway where foot traffic is light and the slab is stable.
- Natural stone (flagstone, travertine for pool decks): Premium look, cooler underfoot around a pool, higher material and labor cost. Travertine is the honest pick for a wet deck; flagstone suits a rustic acreage setting.
- Pool coping and waterline tile: Coping should be set slightly proud of the deck with a slip joint so movement around the pool shell doesn’t crack the surround. A detail people skip and regret.
- Sealing and joint sand: Polymeric sand locks joints and resists washout. Sealer protects color and surface; reapply every few years on high-traffic surfaces.
We use Belgard hardscape products where they fit the job, and we’ll tell you plainly when a cheaper option will serve you just as well.
What Patios, Walkways & Pool Decks Cost in Sunnyvale, TX
Expect $3,500 – $11,000 for a paver patio, with walkways and pool decks scaling from there. Five variables move that number most: square footage, existing surface condition (demo of a thick failed slab costs more than pulling old pavers), drainage corrections, material grade (paver line vs. natural stone), and whether electrical or plumbing must be relocated. Our written estimate itemizes demo, base, drainage, material, and labor line by line, so you can see exactly where your money goes. It excludes items like pool equipment repair, landscaping restoration outside the work zone, and any structural repairs a foundation issue surfaces. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhy Sunnyvale Properties Change This Job
Sunnyvale (ZIP 75182) is a small, affluent town on the eastern edge of Dallas County, and its building stock skews to large-lot custom and semi-custom homes plus acreage properties with shops and outbuildings, not dense tract infill. That profile shapes patio and walkway work in ways you don’t see in neighboring Mesquite or Garland. First, permitting: Sunnyvale’s small size means its own permitting and inspection rhythm, and knowing the office matters more here than in a big-city jurisdiction. Second, the soil. The expansive blackland clay under every pad is the failure point most homeowners discover after the first big rain, so we excavate and compact deeper and lean harder on drainage design. On the rural-edge acreage lots, long driveways and shop-style outbuildings need separate drainage planning, and heavy spring storm and hail seasons mean exterior work gets scheduled with weather in mind. If your project is part of a wider scope, homeowners often pair this with a Full Kitchen Remodeling in Sunnyvale when the outdoor living space is meant to connect to a renovated interior.
Serving Sunnyvale, TX – Our Local Coverage Area
We serve Sunnyvale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Patios, Walkways & Pool Decks in Sunnyvale

A standard patio takes one to two weeks from demo to sealing; a pool deck with a walkway network can run up to three weeks. Weather and drainage corrections are the usual variables. Call (888) 426-8078 for a timeline built around your specific property.
It depends on scope: a flush patio often doesn’t, but decks tied to a pool, elevated structures, or electrical work usually do. We confirm with Sunnyvale’s permitting office before we start and pull what’s required. Call (888) 426-8078 to talk through your project.
In most cases, yes. A flush patio or walkway rarely disturbs utilities, and we map existing lines first. If pool plumbing or a shop’s power needs relocation, we flag it in the estimate before work begins. Call (888) 426-8078 for an exact quote.
Paver patios run $3,500 – $11,000, with pool decks and walkway networks priced by size, material, and drainage needs. Our written quote itemizes each line. Call (888) 426-8078 for a free estimate; the number you see is the number you pay.
Every project is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship across the full two-year term. Call (888) 426-8078 to schedule your free estimate.
Get a Free Estimate for Patios, Walkways & Pool Decks in Sunnyvale
Call (888) 426-8078 and a live person answers, day or night. We’ll set a free on-site estimate and design consult, walk your property, and hand you a written line-item quote with upfront pricing and no surprises. If you’re also planning an outbuilding or addition, see how this pairs with ADU Site Prep & Utilities in Sunnyvale, or explore our Driveway & Pavers work for the full outdoor scope.
Written by the team at Groundwork Construction Co.












