







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Heath: What You’re Actually Getting Into
Paver driveways in Heath run $7,000 – $18,000 for a two-car apron, and a typical install takes three to five working days from demolition to the final compaction pass. The job is excavation, a compacted base, an edge restraint, sand-set pavers, and polymeric joint sand – nothing gets poured. Call (888) 426-8078 and we’ll walk your lot, measure the actual square footage, and put real line items in front of you before you commit to anything.
How a Paver Driveway Goes In, Day by Day

Most contractors hand you a start date and disappear into the fog. Here’s the actual sequence so you know what to expect and when you need to make a call.
Day 1: Layout and demolition
We string-line the edges, mark utility locates, and cut out the existing surface. If there’s old concrete, it comes up in slabs and leaves in a dumpster the same day. You decide the final layout and the paver pattern before we cut anything – moving a string line takes minutes; moving a base takes days.
Day 1 – 2: Base prep and grading
This is the stage that determines whether your driveway lasts 15 years or 5. We dig down 8 to 10 inches, lay a woven geotextile fabric, and compact crushed limestone base in 2-inch lifts with a plate compactor. On Heath’s expanding clay, we grade the base to shed water away from the garage door and toward the lot line. If your lot sits on a slope, this is also when the retaining edge gets built.
Day 2 – 3: Edge restraint and bed sand
A concrete or steel edge restraint gets pinned along both sides – without it, pavers creep and open up within two summers. Then an inch of bedding sand gets screeded to grade. You’ll see the driveway’s final height here; if it’s sitting proud of the garage slab, we adjust now, not later.
Day 3 – 4: Paver installation
Pavers get set in the pattern you chose, cut along the edges with a wet saw, and locked in with a plate compactor. This is the loudest, most visible day. Your job is one thing: pick the pattern and the color mix before the first pallet shows up.
Day 4 – 5: Joint sand and final cleanup
Polymeric joint sand goes in the gaps, gets watered in to activate, and cures over 24 hours. We sweep, haul off the cutoffs, and walk the finished driveway with you. Any chips, lippage, or color issues get flagged and fixed before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between
Not all pavers are the same product, and the choice you make here is the single biggest lever on both the price and the lifespan.
- Standard concrete pavers (50 – 60mm): The workhorse option. Available in dozens of shapes and colors. Runs toward the bottom of the $7,000 – $18,000 range. Holds up in North Texas heat; the color fades slightly over a decade but the surface doesn’t.
- Thick-format pavers (70 – 80mm): Heavier, better under vehicle load, and the right call if you’ll have an RV or heavy truck parking on the driveway. Adds material cost but resists shifting far better on clay.
- Clay brick pavers: The classic look. More expensive per square foot, but the color is through-body – it doesn’t fade, chip, or reveal a gray core when it scratches. A century-old material that still outperforms its replacements.
- Permeable pavers with open joints: Worth considering on Heath lots near the lake, where stormwater management is a real concern. Slightly higher material cost, but drainage is built into the system.
- Pattern and color mix: Running bond, herringbone, and basketweave are the three standard patterns. Herringbone locks tighter under turning loads; running bond runs cheaper per square foot. Color selection matters more than pattern to most buyers – bring a photo of your house elevation.
For the same care on the paver patio side of the yard, our Driveway & Pavers service covers patios and walkways that pair naturally with a new driveway.
What Paver Driveways Cost in Heath, TX

A paver driveway in Heath runs $7,000 – $18,000 depending on size, base conditions, paver grade, and edge details. Here’s what’s inside that number and what pushes it to either end.
| Line item | Typical range |
|---|---|
| Paver driveway install (standard concrete pavers) | $7,000 – $18,000 |
| Thick-format pavers (per grade upgrade) | +$800 – $2,500 |
| Clay brick pavers | +$1,500 – $4,000 |
| Removal of existing concrete | $800 – $2,200 |
| Retaining edge on slope | $600 – $2,800 |
| Polymeric joint sand upgrade | $150 – $500 |
What moves the number: square footage (a two-car apron runs 400 – 500 sq ft; an extended drive to a detached garage pushes past 800); existing surface (removing concrete adds a day and a dumpster); base conditions (clay that needs deeper excavation costs more than sandy or already-compacted ground); slope and drainage work (any retaining edge, French drain, or grading correction adds real money); and paver grade (standard vs. clay brick vs. thick-format).
What’s included in our written estimate: demolition, haul-off, base prep with geotextile fabric, edge restraint, paver material, joint sand, and final cleanup. What often isn’t included on cheap quotes: existing concrete removal, base depth below the standard 8 inches, retaining edge, and drainage correction. We put every one of those on the line-item quote so there are no change orders once work starts. No-hassle upfront pricing – the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Heath Homes Specifically Do to This Job
Heath is a fast-growing, upscale lakefront suburb on the east shore of Lake Ray Hubbard, and it’s not like surrounding Rockwall or Forney. The work here is dominated by custom and semi-custom homes on large, often heavily wooded lots – many 3,000+ sq ft on acre-plus parcels – with floodplain-adjacent and lake-view lots that need site-specific drainage and retaining work you don’t see in inland towns. On the Ray Hubbard side of 75032, tight setbacks, Corps of Engineers floodplain restrictions, and tree-preservation rules mean excavation, grading, and base plans often need extra engineering that contractors in nearby towns skip.
Add North Texas heat and expansive clay soil that swells and shrinks through the year, and a paver driveway on a Heath lot is as much a drainage project as it is a hardscape project. Older ranch-style homes built from the 1970s through the 1990s along the lake often have driveways that settled or cracked because the original base was too shallow for the clay. We see it every week. That’s why we spec 8 to 10 inches of compacted base rather than the 4 to 6 most installers use.
Serving Heath, TX – Our Local Coverage Area
We serve Heath and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Heath

Three to five working days for a typical two-car apron, and up to seven on larger custom-lot projects with retaining edge or drainage work. Weather is the wild card – North Texas spring storms can push a day or two. Call (888) 426-8078 for an exact timeline based on your lot.
Straight driveway replacement within the existing footprint usually doesn’t need a permit, but new curb cuts, expanded footprints, or work touching a floodplain-adjacent parcel often do. We check with the city before we dig and pull what’s required. Call (888) 426-8078 and we’ll tell you what your specific lot needs.
No – not on a driveway. Overlay installations fail because the underlying slab movement transfers straight into the pavers. We remove the existing concrete, build a proper compacted base, and install fresh. That’s why concrete removal shows up as a line item, not a surprise.
Most Heath paver driveways fall between $7,000 and $18,000. The low end is a standard-paver two-car apron over already-clear ground; the high end is a larger footprint, clay brick material, retaining edge, or drainage correction. Call (888) 426-8078 – estimates are free and line-item written.
Every driveway we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. That covers workmanship, base, edge restraint, and joint sand. Call (888) 426-8078 if you want the warranty language in writing before you sign.
Homeowners on larger parcels often pair a new driveway with ADU Design & Permitting in Heath, or plan a Garage Conversion ADU in Heath that needs a paved approach – worth thinking about before you lock the layout. If the driveway is part of a bigger exterior plan, start with the full Driveway & Pavers in Heath scope. We cover all of Heath, and our technicians bring up to 12 years of experience to every install.
Get a Free Paver Driveway Estimate in Heath
Call (888) 426-8078 and a live person answers – no voicemail, no waiting until Monday. We’ll schedule a free on-site estimate, measure the driveway, walk your drainage, and hand you a written line-item quote with every option priced out. You’ll know exactly what you’re getting and what it costs before any work starts. Background-checked, uniformed technicians on every job, upfront pricing with no surprises, and 0% financing for 18 months if you’d rather spread the cost.
Written by the team at Groundwork Construction Co.












