







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Small Bathroom Remodels in Rowlett, TX: What They Cost and How Long They Take
Most small bathroom remodels in Rowlett run $5,000 – $12,000 and take two to three weeks from demolition to final walkthrough. That number covers a full tear-out and rebuild of a hall bath or guest bath in the 35 to 50 square foot range: new tile, vanity, toilet, fixtures, paint, and waterproofing. Where homeowners get surprised is scope creep – the job that starts as a refresh and turns into a layout change. Call (888) 426-8078 and we’ll price both versions so you can see the difference before you commit.
How We Run a Small Bath Remodel, Stage by Stage

Small bathrooms fail on sequencing, not on materials. Every trade wants the room at a different time, and in a tight space there’s no room to work around each other. Here’s the order we hold to.
Stage 1: Walkthrough and written scope (day 0, about 90 minutes)
We measure the room, check what’s behind the walls where we can, and photograph the existing plumbing and electrical. You decide the big three here: whether the tub or shower stays in place, whether the vanity moves, and whether the floor tile changes. Those three answers set roughly 70% of the final price. You leave with a line-item quote, not a lump sum.
Stage 2: Demo and rough-in inspection (days 1 – 3)
We pull the permit before demo starts, protect the hallway and adjacent flooring, and tear out to the studs. Old tile, drywall, vanity, and fixtures come out; the subfloor gets inspected for soft spots. If we’re relocating a drain or adding a GFCI outlet, the rough plumbing and electrical get inspected at this point before anything closes back up. You decide nothing during these days – we just keep you posted on what we find.
Stage 3: Waterproofing and substrate (days 4 – 6)
This is the stage that decides whether your shower lasts fifteen years or five. Cement board goes up, joints get taped and sealed, and the wet area gets a bonded waterproofing membrane. A pre-slope goes in under a traditional shower pan. You’ll approve the tile layout and grout color here, because once tile starts there’s no cheap way back.
Stage 4: Tile, fixtures, and finishes (days 7 – 14)
Floor tile, then wall tile, then grout, then the vanity, toilet, mirror, and trim. Fixtures go in last so they don’t get scratched. If your vanity is a semi-custom from a brand like KraftMaid, it needs to be ordered in stage 1 – lead times are the single most common reason a small bath runs long.
Stage 5: Punch list and final inspection (days 15 – 18)
We walk the room with you, run every fixture, check the caulk lines, and clear the punch list before the final inspection. You get the signed-off permit and the 730-Day Done Right Promise in writing. If something isn’t right in month eight, we come back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
A small bath doesn’t leave room for many decisions, so the ones you make matter more. These are the choices that come up on nearly every Rowlett job.
- Tile vs. luxury vinyl plank. Porcelain tile runs $8 – $18 per square foot installed and handles moisture for decades. LVP is cheaper up front at $4 – $9 installed but won’t survive a slow leak the same way. For a full bath, tile almost always wins on resale.
- Quartz vs. granite vanity top. Quartz (Silestone and Caesarstone both make solid options) is non-porous, so it doesn’t need sealing and shrugs off hair dye and toothpaste. Granite costs about the same but needs resealing every year or two. Most of our Rowlett customers go quartz.
- Prefab shower pan vs. tiled pan. A prefab pan saves $800 – $1,500 and installs in a day. A tiled pan with a proper pre-slope looks custom and lets you match the floor, but it adds three to four days and real labor. Small baths often benefit from the prefab because it buys back floor space.
- Vanity size and door style. A 30-inch vanity fits most hall baths; 36 inches feels generous but eats standing room. Semi-custom doors and finishes cost more than stock, and the lead time is longer.
- Faucet and shower trim. Moen and Kohler both make reliable mid-grade lines in the $150 – $400 range per fixture. Off-brand trim at half that price is where we see cartridge failures within three years.
What Small Bathroom Remodels Cost in Rowlett, TX

The working range for small bathroom remodels in Rowlett is $5,000 – $12,000. A straight cosmetic refresh with stock materials lands near the bottom. A full gut with tile, a semi-custom vanity, and relocated plumbing pushes to the top. Five variables move that number:
- Size. A 35 square foot powder room and an 80 square foot guest bath are different jobs even when the finishes match.
- Existing condition. Water damage behind the tub surround, a soft subfloor, or old galvanized supply lines add $1,000 – $3,500 once the wall is open.
- Moving plumbing or electrical. Relocating a drain or adding an outlet means rough-in inspection and extra labor. A vanity that stays put saves real money.
- Material grade. Tile at $8 per square foot versus $18, stock vanity versus semi-custom, one fixture brand versus another – the spread across a small room is typically $1,500 – $3,000.
- Permit scope. Cosmetic work and full gut-and-rebuild carry different permit requirements and inspection schedules.
Every written estimate lists what’s included and what isn’t: demolition, disposal, materials, labor, permits, and inspection. It also names the one thing most quotes bury – the contingency for what we find behind the wall. We price the job with our upfront pricing so the number you see is the number you pay, and you have 0% financing for 18 months plus $1,000 off projects over $10,000 if you’re bundling this into a larger job.
See the difference
Before
After
Before
After
Before
AfterWhat Rowlett Homes Specifically Do to a Small Bath Job
Most of the small baths we remodel in Rowlett sit inside 1980s to 2000s brick-veneer houses in subdivisions like Waterview and the Peninsula, and the housing stock drives the work. Those first-generation bathrooms are hitting the end of their useful life all at once: the original cultured marble vanities are yellowing, the shower pans are cracked, and the brass fixtures are failing. We also work on teardown-rebuild and infill projects on the small lots squeezed between established subdivisions, where the new bath has to fit tight dimensions and mature trees dictate where the demo dumpster can park.
The other thing that shows up here is blackland soil. That expanding clay shifts with our wet-dry cycles, and it finds its way into ground-floor baths as cracked tile and doors that stick, so we check the subfloor and door framing before we quote. Lakefront properties in the 75088 and 75089 ZIP codes bring their own layer – floodplain considerations and a different inspection path when the project touches a shoreline addition. Some Rowlett HOAs also review exterior modifications, so if your project changes a window or vent placement, we check the rules before demo. Homeowners often pair a bath project with Specialty Roofing in Rowlett when the same storm season has aged the roof, or with Gutters & Accessories in Rowlett if the bath vents through a wall that needs new drainage. For the wider scope, see our Bathroom Remodeling in Rowlett page, or browse the full Bathroom Remodeling service. We cover all of Rowlett.
Key Takeaways
- Small bathroom remodels in Rowlett typically cost $5,000 – $12,000 and take two to three weeks.
- Permits are pulled before demo, and plumbing and electrical get inspected at rough-in.
- Keeping the tub, vanity, and toilet in place is the cheapest way to stay under budget.
- Waterproofing quality decides how long the shower lasts, not the tile price.
- Every job is covered by the 730-Day Done Right Promise.
Serving Rowlett, TX – Our Local Coverage Area
We serve Rowlett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Small Bathroom Remodels in Rowlett
Two to three weeks from demo to final inspection for most small baths. Tile setting and grout cure account for about a week of that, and custom vanity lead times can add days if they aren’t ordered at the start. Call (888) 426-8078 for a schedule built around your actual selections.
Yes, if the work involves plumbing, electrical, or structural changes – cosmetic work like paint and fixture swaps usually doesn’t. We pull the permit and manage the inspection schedule so you’re not the one chasing the city. Call (888) 426-8078 and we’ll tell you which category your job falls into.
Yes, and staying put is the single biggest cost saver. Keeping the toilet, tub, and vanity drains where they are avoids rough-in work and extra inspections, which typically saves $1,000 – $3,000. Call (888) 426-8078 and we’ll show you a layout that works within the existing plumbing.
Expect $5,000 – $12,000 for a typical small bath. The low end is a cosmetic refresh with stock materials; the high end is a full gut with tile, a semi-custom vanity, and relocated plumbing. Call (888) 426-8078 for an exact line-item quote – estimates are free.
Every project we do is covered by the 730-Day Done Right Promise. If our workmanship fails within that window, we come back and make it right at no cost to you. Call (888) 426-8078 to talk through what the promise covers on your job.
Get a Free Estimate on Your Rowlett Small Bath

Call (888) 426-8078 and a live person answers, day or night. We’ll ask a few questions about the room, set a time to walk it with you, and hand you a written line-item estimate with materials, labor, permits, and the warranty spelled out in plain language. No pressure and no surprises – just the number before you decide. Our technicians have up to 12 years of experience, and they arrive background-checked and in uniform.
Written by the team at Groundwork Construction Co.












