







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Balch Springs, TX: What It Costs and How Long It Takes
Vanities, tile & fixtures work in Balch Springs usually runs $9,000 – $28,000 for a full tear-out and rebuild, and most jobs land between two and four weeks of working days. A vanity-and-tile-only refresh, with plumbing staying put, can finish in 6 to 9 days. Call (888) 426-8078 for a free on-site estimate with a written line-item quote.
How the job actually runs, day by day

We sequence vanities, tile & fixtures the same way on every Balch Springs job, because the order is what keeps a bathroom out of commission for weeks instead of days.
Stage 1 – Site walk and measurements (day 1, about 90 minutes). We photograph the room, check the subfloor and the wall behind the existing vanity, and confirm where the shutoffs sit. You decide the vanity footprint and whether the toilet stays in place. If wall or floor covering comes out and reveals soft framing, that conversation happens now, not in week three.
Stage 2 – Demo and rough-in prep (days 2 – 4). Old tile, vanity, toilet and trim come out. We inspect the subfloor for movement and the wall cavity for old galvanized or polybutylene supply lines, which turn up often in 1960s and 1970s Balch Springs ranch homes. If you’re relocating the vanity sink line or adding a second one, the plumber and electrician rough in here. Rough inspection happens before anything gets closed back up.
Stage 3 – Backer board, waterproofing and tile setting (days 5 – 9). Cement backer board or a bonded waterproof membrane goes down, then floor tile, then wall tile. You pick grout color and layout before this stage starts, since a change mid-set costs both tile and time. Large-format tile over 12 by 24 inches takes longer to set level because the floor has to be flattened first.
Stage 4 – Vanity set, fixtures and trim (days 10 – 12). Vanity goes in and gets shimmed and secured to the wall studs, then the top, sink, faucet, mirror, lighting and any accessories. Final plumbing and electrical inspection follows. This is where the small decisions bite: faucet finish, drain style, towel bar placement.
Stage 5 – Final walkthrough and punch list (day 13 – 14). We test every fixture, check caulk lines, and hand over the written workmanship coverage under our 730-Day Done Right Promise. You flag anything that doesn’t sit right, and we fix it before the job closes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the money and most of the arguments in this job come down to four picks. Here’s what each one really buys you.
- Vanity type: freestanding vs. built-in. A freestanding vanity in the 48-to-60-inch range is the practical choice for most Balch Springs ranch bathrooms. It installs in a day, and you can swap it later without touching tile. A built-in or furniture-style vanity looks more custom but needs framing support and adds roughly a day and a half of carpentry.
- Countertop: quartz vs. granite vs. cultured marble. Quartz, including Silestone, resists staining and needs no sealing, which matters in a humid bathroom. Granite costs similar but wants resealing every year or two. Cultured marble is the budget pick and shows scratches faster.
- Floor tile: porcelain vs. ceramic vs. luxury vinyl. Porcelain handles moisture and heavy traffic best, and it’s what we recommend over slab in this climate. Ceramic costs less but chips more easily. Luxury vinyl plank is the fastest install and the friendliest on a floor that moves, though it won’t last like tile.
- Fixtures: brand tier. Kohler and Moen sit in the middle-to-upper range where cartridge and finish warranty support actually exists, which matters when a faucet drips in year four. Builder-grade fixtures save $200 – $500 on a typical job and tend to be the first thing you replace.
What Vanities, Tile & Fixtures costs in Balch Springs, TX

Plan on $9,000 – $28,000 in Balch Springs for a full vanity, tile and fixture rebuild. A small bathroom remodel with the same scope lands in the $5,000 – $12,000 band if the room is under about 40 square feet and no plumbing moves.
Vanity installation runs $800 – $3,000 depending on size, whether it’s built-in, and whether the sink line has to move.
What pushes a job toward the high end:
- Plumbing relocation. Moving the sink line, adding a second sink, or shifting the drain means opening the floor or wall.
- Old supply and drain systems. Original plumbing in a 1970s Balch Springs home often has to be updated once the wall is open.
- Subfloor or framing repair. Soft framing, a floor that flexes, or a stopped-up drain line hidden under tile.
- Tile grade and size. Large-format porcelain, mosaic borders, or a niche adds material and labor.
- Permit scope. Replacing a vanity and tile is usually cosmetic and doesn’t need one; moving plumbing, electrical or walls does, and the inspection adds time.
Your written estimate should list demolition, backer board and waterproofing, tile and setting materials, the vanity and top, fixtures, and haul-away. It should not hide permit fees or “miscellaneous” lines. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Balch Springs homes specifically do to this job
Balch Springs sits in the heart of the Texas blackland prairie, where expansive clay soils shrink and swell through the wet-dry cycles, and that movement shows up in bathrooms. After heavy rains, we regularly see pier-and-beam homes near the 75180 ZIP shift and settle, which shows up as uneven floors, a vanity that won’t sit level, and doors that stick. That matters here because floor tile laid over a floor that flexes will crack along the grout lines within a season or two. We check the floor for bounce and settle before tile goes down, and we’ll tell you if it needs attention first.
The housing stock drives the rest. Much of what we work on in Balch Springs is mid-20th-century to 1970s single-story ranch homes on pier-and-beam or shallow slab, and many still have original plumbing and electrical behind the vanity wall. Hot, humid summers and heavy spring rain also mean moisture gets into wall cavities, so we pay attention to waterproofing behind tile and to ventilation at the fan, not just the finish. Older pier-and-beam homes near 75180 often need the plumbing updated while the wall is open, and that’s a conversation to settle before demo, not after.
Serving Balch Springs, TX – Our Local Coverage Area
We serve Balch Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vanities, Tile & Fixtures in Balch Springs

Most take 10 to 14 working days from demo to final walkthrough. A vanity and tile refresh with no plumbing changes can finish in 6 to 9 days. Call (888) 426-8078 for an exact quote.
Usually not, if you’re replacing a vanity, tile and fixtures in the same spot. Moving plumbing, electrical or walls does require a permit and inspection, and we pull the permit and pass the inspection as part of the job. Call us and we’ll tell you which category your project falls into.
Yes, and most Balch Springs jobs we quote are exactly this: same sink location, same toilet, new vanity, new tile, new fixtures. It’s faster, cheaper, and avoids opening the floor or wall. If you want a second sink or a relocated vanity, that’s a different scope and we’ll price it separately.
Expect $9,000 – $28,000 for a full rebuild, with a smaller scope in the $5,000 – $12,000 range. The variables are plumbing changes, floor condition, tile grade and permit scope. Call (888) 426-8078 for an exact quote, and estimates are free.
Every job is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship for two full years, which matters on tile and vanity work where settling and moisture show up later. Call us to go over what’s covered in writing.
Get a free estimate for Vanities, Tile & Fixtures in Balch Springs
Call (888) 426-8078 to schedule your free on-site estimate. We’ll bring a tape measure and a camera, check the subfloor and the plumbing behind the vanity wall, and go over the tile and fixture options on the spot. You’ll get a written line-item quote with 0% financing for 18 months available, plus $1,000 off projects over $10,000. The number you see is the number you pay.
Written by the team at Groundwork Construction Co.












