







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Installation in Mesquite, TX
A walk-in shower installation in Mesquite typically costs between $4,200 and $11,500 for most standard homes, and a full conversion from an existing tub can often be finished in under two weeks. That’s the direct answer most homeowners call us for. If you’re ready to ditch the step-over tub and get a low-threshold shower you can actually use, we handle the whole project from foundation to finish line, including waterproofing, plumbing changes, tile, glass, and the final walkthrough. Call (888) 426-8078 and a live person picks up, day or night, with a free estimate and design consult.
Most Mesquite homes were built with a tub-and-shower combo or a raised pan, and a lot of them were installed in the 1970s and 1980s. That layout was fine for the original owners. It’s a problem now if you have a parent who’s had a fall, a knee replacement, or just a bad back at the end of the day. Walk-in shower installation is one of the most requested changes in our Bathroom Remodeling line, and it’s often the change that makes the rest of the room worth updating too.
We do this work as a full-scope contractor, not a one-trade crew that leaves the plumbing to a subcontractor and the tile to someone else. Our technicians have up to 12 years of experience, and every project is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s a written commitment, and it’s one of the longest workmanship guarantees in residential construction. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and the number you see on your estimate is the number you pay.
Key Takeaways
- Walk-in shower installation in Mesquite runs roughly $4,200 to $11,500, with most tub-to-shower conversions landing in the $6,000 to $9,000 range.
- Most projects finish in 7 to 14 working days once materials are on site.
- The 730-Day Done Right Promise covers workmanship in writing.
- Live calls 24/7, background-checked and uniformed technicians, and pricing that’s upfront when you sign for the free estimate.

When You Need Walk-In Shower Installation
Most people who call us for a walk-in shower already know why they want one. The reasons fall into a handful of patterns we see across Mesquite neighborhoods, from the older brick homes off Belt Line Road to the newer builds out toward Lawson and Heartland.
- Someone in the house has had a fall or a near miss. A tub wall is 14 to 17 inches high in most Mesquite homes. For an older parent or anyone recovering from surgery, that lip is a genuine hazard, especially on a wet tile floor. A curbless or low-threshold walk-in removes the step entirely.
- You’re remodeling around a caregiver or a long-term plan. Some homeowners call us because they want to age in place and stop thinking about a bathroom renovation later. A walk-in shower with a bench and grab bar placement done during the build costs far less than retrofitting one afterward.
- The existing shower is leaking. If you see soft drywall near the shower, a loose tile that moves when you step on it, or a rust-colored stain on the ceiling below, the waterproofing behind the tile has likely failed. In a lot of Mesquite slab-foundation homes, the pan was set with a mortar bed that’s now 30+ years old. Once the moisture barrier is compromised, we’re tearing it out anyway, which makes it the right time to change to a walk-in design.
- The fiberglass unit is stained or cracked. Builder-grade fiberglass surrounds yellow over time and crack along the seams. If you’ve tried everything and it still looks dingy, a new tile shower with a modern drainage line makes more sense than patching a 25-year-old insert.
- You want a curbless, zero-threshold shower with linear drain. This is the design most people picture now: a single fixed-glass panel, a bench, a vertical tile layout. It’s also the design that requires real waterproofing knowledge. A curbless shower needs the floor recessed, the slope built correctly, and a bonded membrane under the tile. Cutting corners here shows up as a leak within two years.
- You’re downsizing the tub and going all-shower. Families with teenagers who only take showers, or couples who haven’t used the tub in years, often choose a larger walk-in footprint over keeping both.
If any of these sound familiar, call (888) 426-8078. We walk through the existing bathroom with you, take measurements, and answer questions about layout and cost before anything’s committed. The estimate and design consult are free.
Our Walk-In Shower Installation Process
We run a fixed sequence on every walk-in shower project so nothing gets skipped, and we give you the schedule in writing before work starts. Here’s how it goes on a typical Mesquite job.
- Free estimate and design consult. We measure the bathroom, examine the existing plumbing and floor structure, and talk through the shower footprint, glass configuration, and whether you want a bench, niche, grab-bar backing, or a linear drain. You get a written scope and price before signing. No surprise line items later.
- Demolition and inspection. We remove the old tub, surround, or tile. During tear-out, we check for water damage behind the wall and under the floor. If the subfloor or framing has rot, we tell you before proceeding. In older Mesquite homes, we sometimes find cast-iron drain lines that need to be replaced while the wall is open.
- Plumbing and rough-in. This is where the new shower valve and drain get set. We stage the drain location to match the finished slope, whether that’s a center drain or a linear channel along one wall. If you’re converting a tub to a walk-in, we relocate the drain and add new supply rough-in. Plumbing changes are documented in the estimate so the scope is clear.
- Waterproofing and backer board. This is the step that decides whether a walk-in shower lasts. We install cement backer board and a bonded waterproofing membrane that runs continuously from the floor up the walls and over the top of any bench. The pan is sloped to drain correctly so water doesn’t pool. We don’t rely on a vinyl liner and a mud bed alone; the finished shower is built around a system that sheds water, not one that traps it behind tile.
- Tile and finish work. You choose the tile, and we lay out the pattern before setting anything. We hand you layout drawings or mark the wall so you can see the plan. We’re set up to source through the same material brands we use across our other trades. Silestone and Caesarstone surfaces work for any stone trim or niche shelf, and Kohler and Moen handles and trim details fit the hardware you want. Nothing gets ordered without your approval.
- Glass, final trim, cleanup. We install the shower door and glass panel, seal the perimeter, and do a final water test before walkthrough. Then we clean up and do the final inspection with you in the room.
Most walk-in shower installations take 7 to 14 working days from demolition to final walkthrough, once materials are in. Custom glass and specialty tile orders can push that longer. We give you the window in writing up front and call you the moment the schedule changes.

Walk-In Shower Installation Pricing in Mesquite
Walk-in shower installation in Mesquite runs between $4,200 and $11,500 depending on size, layout, and whether you’re converting a tub or replacing an existing shower. A basic tile shower with a pre-fabricated base and a standard chrome trim lands at the low end; a curbless, linear-drain shower with a built-in bench and custom frameless glass lands at the high end. Here’s how those numbers break down.
| Line item | Typical range in Mesquite |
|---|---|
| Demo and haul-away (tub or old shower) | $400 – $900 |
| Plumbing rough-in (valve, drain, supply) | $600 – $1,800 |
| Waterproofing, backer board, sloped pan | $1,100 – $2,400 |
| Tile work (floor, walls, niche, bench) | $1,200 – $3,600 |
| Shower glass and door | $600 – $2,200 |
| Trim, hardware, fixtures | $350 – $1,100 |
| Total installed | $4,200 – $11,500 |
What actually moves the number
- Size and shape. A 36×60 standard shower sits at the low end. A 48×72 walk-in with a bench or a full-width niche sits at the top of the range. Larger footprint means more tile, more membrane, more glass.
- Curbless versus curbed. A curbless shower means recessing the floor and building the slope correctly. That’s more framing and more labor, usually $800 to $1,500 on top of a curbed installation.
- Drain type. A linear drain costs more than a center drain, mostly because of the channel and the way it changes the tile layout, but it’s often the right call for a curbless design.
- Glass and door. A framed sliding door lands around $600. A frameless semi-custom glass panel with a fixed side screen is closer to $2,200.
- Tile choice. Large-format porcelain is faster to lay and easier to seal. Penny tile or patterned mosaic costs more in labor because of the slower layout and higher cut count.
- Hidden conditions. A soft subfloor, old cast-iron drain, or galvanized supply lines change the budget. We price those after tear-out so you’re not paying for a repair you may not need.
As a full-scope contractor, we also handle the rest of the bathroom if you’re updating it at the same time. That includes vanity work, lighting, exhaust fans, and floor tile. The same brands we use across our home remodeling services are available here. If you want to see how the full-room scope changes the number, our bathroom remodeling in Mesquite page covers that.
For projects over $10,000, we take $1,000 off. We offer 0% financing for 18 months on approved credit. The free estimate and design consult means you see the real number before signing anything. That’s upfront pricing, no surprises. Call (888) 426-8078 to book yours.
FAQs – Walk-In Shower Installation
How much does walk-in shower installation cost in Mesquite?
Walk-in shower installation in Mesquite costs $4,200 to $11,500, with most tub-to-shower conversions running $6,000 to $9,000 installed. A curbless, frameless-glass walk-in with a bench and tile walls will land at the top of that range. A clear, itemized number comes from the free estimate, which is why we don’t give ballpark phone quotes. Call (888) 426-8078 to schedule it.
Can you convert my tub to a walk-in shower in Mesquite?
Yes. Tub-to-shower conversions are the most common version of this work we do in Mesquite. We pull the tub, re-route the drain and supply lines to fit the new shower footprint, and build a new waterproofed pan. Many Mesquite homes built in the 1970s and 1980s have the tub on a raised platform with a narrow drain opening; that changes the plumbing scope slightly, but it doesn’t stop the conversion. Expect 7 to 14 working days once materials arrive.
Do you need to replace the whole bathroom floor for a curbless shower?
Not always, but often. A curbless shower means recessing the shower floor so the finished surface is level with the bathroom tile. In a wood subfloor, that requires cutting and reinforcing the joists around the shower footprint. On a Mesquite slab home, we chip and lower the shower pan area instead. Answering this is part of the free estimate; we look at the floor structure before we quote curbless so you’re not surprised later.
How long does a walk-in shower installation take?
Seven to 14 working days is the normal window once materials are on site. Demo, plumbing, and waterproofing typically take 3 to 5 days. Tile, grout, and glass take 4 to 9 more, depending on the tile size and layout. Custom glass can add a week because the panel is measured and made to order. We give you the schedule in writing before we start and call you the moment anything shifts.
Is a walk-in shower a good idea for aging in place?
Yes, and it’s one of the reasons many Mesquite homeowners remodel. A curbless shower with a built-in bench, grab-bar backing in the framing, and a hand-held showerhead is the setup most recommended for anyone who plans to stay in their home as they get older. Bringing us in during the original build costs a fraction of retrofitting later, since the backing and slope are already there.
What waterproofing do you use, and why does it matter?
We build walk-in showers around a bonded waterproofing membrane that runs continuously from the floor up the walls and over any bench, with the pan pre-sloped to drain. That matters because most shower failures in Mesquite are not tile failures; they’re failures behind the tile. When a 25-year-old mortar bed or vinyl liner lets water through, the damage shows up as soft drywall, movement in a loose tile, or a stain on the ceiling below. A properly sloped pan with a bonded membrane prevents that. Everything we install is covered under the 730-Day Done Right Promise, which means if the work isn’t right, we come back and make it right.
Can you match the shower tile to the rest of the bathroom?
Yes. We bring tile samples and can work with the materials you already have on the floor or vanity. If your vanity counter is Silestone or Caesarstone, we can coordinate shower niche shelves or a bench top in the same stone family. Kohler and Moen trim and fixtures are both available so the shower hardware matches the sinks and finishes. We don’t order anything without your hand on the sample.
Why is a walk-in shower installation priced higher than just replacing a fiberglass unit?
Because the work is entirely different. A fiberglass insert drops into an existing opening and gets sealed to the wall. A walk-in shower typically involves framing changes, re-pitched waterproofing, more tile labor, and a made-to-measure glass panel. The upfront number is higher, but a properly built tile walk-in outlasts a fiberglass surround, doesn’t yellow, and is far more resistant to water damage when the pan and membrane are built correctly. That’s why we think about it as built to last, backed in writing.
Why Mesquite Homeowners Call Groundwork Construction Co.
We’re a full-scope construction company, which means the same team that plans your walk-in shower is accountable for the whole project from start to finish. There’s no blaming the plumber when the tile is wrong, and no blaming the tile setter when the drain leaks. One contractor, one schedule, one promise: the 730-Day Done Right Promise. If the work isn’t right, we come back and make it right.
Our technicians are background-checked and uniformed, and they have up to 12 years of experience. Calls are answered by a live person 24 hours a day, 7 days a week. None of that is marketing; it’s what we commit to on every job. The material partners we use are top-tier by category, so you’re choosing quality, not whatever’s in stock. That means the fixtures, tile, and stone come from brands you’d recognize, and the installation is documented and backed in writing.
Across Mesquite, from the older neighborhoods near downtown to the newer developments out by Mesquite High School, we’ve seen the same pattern. Homeowners want a contractor who shows up, quotes clearly, and answers the phone. That’s a low bar in this business, but it’s the bar we hold ourselves to.
When you’re ready to plan your walk-in shower, call (888) 426-8078 for a free estimate and design consult. A live person picks up around the clock. Same number for the estimate, the schedule question, and the follow-up. If your project goes over $10,000, the $1,000-off promotion applies, and 0% financing for 18 months is available. Get the real number, get the schedule in writing, and get the 730-Day Done Right Promise backing every bit of the work. From foundation to finish line, that’s how we do it.
Written by the team at Groundwork Construction Co. of Mesquite, serving Mesquite.


