







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Heath: Costs, Timeline, and What’s Actually Involved
A walk-in shower remodel in Heath, TX typically runs $9,000 – $28,000 for a full custom job, or $4,500 – $12,000 when you’re keeping the footprint and just replacing what’s there. Most jobs finish in 2 – 4 weeks of active work once demo starts, though custom tile and glass orders add lead time on the front end. Call (888) 426-8078 to schedule a free on-site estimate with a written line-item quote. Upfront pricing, no surprises.
The Real Sequence for Walk-In Showers & Shower Remodeling, Stage by Stage

Shower projects fail on scheduling, not on tile. Here’s the order we work in and what you’ll be deciding along the way.
Stage 1: Site evaluation and deconstruction (Days 1 – 2)
We open up the existing shower to see what’s underneath. In Heath’s older lake-side ranch homes, that often means finding a mortar bed deck from the 1980s or a fiberglass pan with a rotted subfloor. You won’t get a real number until we see this. This is the day you decide the shower footprint: curb or curbless, and whether the bench is built or site-built.
Stage 2: Rough plumb and framing (Days 2 – 4)
Drain relocation, valve position, and blocking for grab bars or a bench all get set here. If you’re moving the drain, expect 1 – 3 extra days and $600 – $1,400 in plumbing labor. This is also where any slab or joist repairs get addressed, which is common in Heath homes on clay soils experiencing movement. You’ll finalize the valve brand and finish at this point (we stock Kohler and Moen options).
Stage 3: Waterproofing and inspection (Days 4 – 5)
The pan gets pre-sloped, a waterproof membrane goes down, and the assembly holds water for a 24-hour flood test. On permitted jobs, the inspection happens between waterproofing and tile. You don’t decide anything here, but you should see the pan test. Ask for it.
Stage 4: Tile and fixture install (Days 5 – 12)
Wall tile, floor tile, niche framing, and trim. This is where the material choice gets real. Porcelain goes up fast and holds up. Natural stone takes longer to lay and needs sealing. Your decision: grout width and the trim profile (Schluter vs. bullnose tile, which changes the look and the price).
Stage 5: Glass and final walkthrough (Days 12 – 16)
Frameless glass is made to measure, so it’s on a 10 – 14 day lead time from templating. Add that to your calendar. This is the day we test the drain slope, check the valve, and seal everything. Any adjustments go in the punch list. Every project is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’ll Actually Choose Between: Materials and Configurations
The material decisions carry real cost and real consequences. Here’s the honest trade-off on each.
- Tile vs. slab walls. Porcelain tile gives you flexibility and repairs; a large-format slab (Silestone or Caesarstone quartz is a common ask) gives a seamless look but costs more and offers no tile-line forgiveness on an out-of-square wall.
- Curbless vs. curb entry. Curbless is the accessibility standard and looks cleaner, but it requires dropping the shower floor 2 – 3 inches, which means cutting joists or framing in a lowered pan. That adds $1,500 – $3,000 and requires a structural assessment on upper floors.
- Frameless glass vs. framed. Frameless glass in 3/8-inch or 1/2-inch thickness costs $900 – $2,400 and reads as high-end. Framed semi-frameless saves $400 – $800 and holds up fine, but you lose the clean lines.
- Linear drain vs. center drain. Linear drains let you use larger tile on the floor with a single slope. They cost $300 – $700 more in parts and labor but drain better and look sharper.
- Fixture finish. Chrome is the durability winner and the cheapest. Brushed nickel and matte black are popular in Heath’s newer custom builds. All finishes are on 4 – 8 week lead times right now.
If you want the shower folded into a larger scope, that’s part of a Bathroom Remodeling in Heath project, and we can quote both as one written bid.
See the difference
Before
After
Before
After
Before
AfterWhat Walk-In Showers & Shower Remodeling Costs in Heath, TX

The real number for a Heath project is $9,000 – $28,000. That range is wide because five things drive it.
| Scope item | Typical range |
|---|---|
| Walk-in shower installation (new footprint) | $4,500 – $12,000 |
| Shower replacement (same footprint, new tile and pan) | $3,000 – $8,500 |
| Full bathroom remodel including shower | $9,000 – $28,000 |
| Frameless glass enclosure (add-on) | $900 – $2,400 |
| Drain or valve relocation (add-on) | $600 – $1,400 |
Here’s what pushes a job to the top of that range: moving the drain or valve (adds 1 – 3 weeks and real plumbing labor), a slab or floor repair underneath (common in Heath homes on clay soil), large-format slab material, a curbless conversion requiring a lowered pan, and any permit scope that triggers a structural review. A curb-entry, same-footprint job with porcelain tile and semi-frameless glass lands near the low end. A curbless, frameless, slab-wall, drain-relocated job lands at the high end. We can also offer 0% financing for 18 months and $1,000 off your project if it’s over $10,000. Your written estimate will list every line item with a fixed price. What’s not included: any structural repair found behind the wall after demo, or foundation work, which gets quoted as a change order only after you see the condition and approve the number. No change orders are added without your signature.
What Heath Homes Specifically Change About This Job
Heath is not a generic North Texas suburb on this work. It’s a lakefront community on the east shore of Lake Ray Hubbard, and that means the housing stock is unusual. Homes along the lake side include older ranch-style houses from the 1970s – 90s, many of which have original fiberglass shower surrounds or cast-iron pans that are 30+ years old and past service life. On the interior side, newer large custom homes (many 3,000+ sq ft on acre-plus lots) often have a master bathroom where the shower was fitted with a large tile surround that failed at the grout or shower pan liner, a very common failure mode in this climate and one we see regularly.
Two local factors affect the job itself. First, the expansive clay soils under Heath properties mean foundation movement and minor slab cracks are more common than in nearby towns, which sometimes shows up as a cracked shower pan or a wall that’s no longer plumb. We check for it during the site evaluation. Second, permitting: shower remodels in Heath homes typically require a permit for any plumbing or electrical relocation, and the inspection sequence includes a waterproofing flood test. If you’re on the lakefront or a floodplain-adjacent parcel, drainage detail gets more attention and your plan may need extra detail. We handle the permitting and walk through inspections. If you want to pair the shower work with other exterior upgrades while you’re at it, homeowners often pair this with Roof Replacement & Installation in Heath or Metal Roofing in Heath.
Serving Heath, TX – Our Local Coverage Area
We serve Heath and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Walk-In Showers & Shower Remodeling in Heath: Frequently Asked Questions

Most projects run 2 – 4 weeks of active work, plus 10 – 14 days of lead time for custom frameless glass. A same-footprint shower replacement can finish in 7 – 10 days. Call (888) 426-8078 for a timeline specific to your job.
Yes, if the work includes relocating plumbing, electrical, or structural framing. A shower replacement with no moved plumbing can often proceed without one, but the specific rule depends on the scope. We pull the permits that apply to your job and pass the inspections before we hand off the keys.
Yes. If the existing drain and valve positions stay, the job becomes a shower replacement and lands much lower: $3,000 – $8,500 for the tile, pan, and glass. Moving the drain or valve adds $600 – $1,400 and 1 – 3 weeks. Call (888) 426-8078 to get an exact quote for your layout.
Budget $9,000 – $28,000 for a full walk-in shower remodel in Heath, with $4,500 – $12,000 for a straightforward shower install. The number depends on your shower size, whether plumbing gets moved, the material grade you pick, and whether structural repair is found behind the tile. Estimates are free – call (888) 426-8078 for a fixed line-item quote.
Every project we do is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right, for two years. That covers labor and workmanship on the shower assembly, waterproofing, and tile. Call (888) 426-8078 for a free estimate.
If walk-in showers & shower remodeling in Heath is on your list, call our team at (888) 426-8078 for a free on-site estimate. A live person answers 24 hours a day, 7 days a week. We’ll walk the bathroom, measure the footprint, talk through material options, and leave you with a written line-item quote: fixed pricing, known timeline, no surprises. Our technicians have up to 12 years of experience, and every job is covered by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












