







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Fate, TX: What the Job Actually Involves
Most wood fence jobs in Fate, TX run $3500 – $9000 for a standard residential lot, and a typical 150 – 200 linear foot cedar privacy fence is done in three to five working days. The bigger variable here isn’t the fence design, it’s what’s underground. Fate is built on former cattle pasture, so post holes regularly hit root mass, old farm debris, and black clay that swells after rain and shrinks hard in a dry August. Call (888) 426-8078 and we’ll walk your fence line before anyone quotes a number.
How a Wood Fence Goes In, Stage by Stage

This isn’t a mystery process, and you should know what happens on day one versus day four. Here’s the sequence we run on every wood fence job in Fate.
Day 1: Walk the line, set the string, call for locates
We mark the exact fence path with you before a shovel touches dirt, confirm property lines against your survey, and call in utility locates (give that 48 hours). On pasture lots we probe the grade every 8 – 10 feet to find the soft spots and old debris before we set a single post. This is the day you finalize height, gate placement, and which side faces the neighbor.
Day 1 – 2: Demo, dig, and set posts
Old fence comes out and hauls off. Posts go in 24 – 30 inches deep, set in concrete, and we dig through root mass and backfill problem holes rather than skimming over them. Post-setting is the slow part on Fate soil. You approve the post line before we move on.
Day 2 – 3: Rails and pickets
Once posts cure, rails go up and pickets follow. This is the visible stretch. You’ll see the fence take shape fast here, and this is where your picket profile and board spacing choices pay off. A standard 6-foot privacy run moves quickly; a taller or decorative-top run adds a day.
Day 3 – 4: Gates, hardware, and trim
Gates get set with proper bracing so they don’t sag in a year, hinges and latches go on, and we cap and trim. You decide gate swing direction and latch style earlier, so this is execution, not decision-making.
Day 4 – 5: Cleanup and walkthrough
We haul off debris, grade the line back out, and walk the finished fence with you. Any board or post that doesn’t sit right gets corrected before we call the job done, and the work sits under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Wood Fence Options You’ll Actually Choose Between
Wood fences aren’t one product. These are the real forks in the road, and what each one costs you in money and upkeep.
- Cedar vs. pressure-treated pine. Cedar resists rot and insects naturally and holds stain longer, but it runs 20 – 30% more than treated pine. Pine is the budget choice and needs re-staining every two to three years in North Texas sun. Most Fate homeowners go cedar for the front-facing run and pine where the budget is tighter.
- 6-foot vs. 8-foot height. Six feet is the residential standard and clears most HOA rules. Eight feet gives more privacy and better wind resistance when braced right, but it costs more per foot and may need HOA sign-off. We check that before you commit.
- Dog-ear vs. flat-top vs. decorative pickets. Dog-ear is the workhorse. Flat-top reads cleaner on a modern tract home. Decorative tops and lattice add cost and don’t change how the fence holds up.
- Board-on-board vs. side-by-side. Board-on-board overlaps pickets for a solid privacy wall with no gaps, which matters on a windy lot. Side-by-side is cheaper and lets wind through, which some homeowners prefer for storm resilience.
- Post spacing and bracing. Standard is 8 feet on center. Tighter spacing and diagonal bracing at corners and gates cost a little more and are what keep a fence standing through a straight-line wind event.
What a Wood Fence Costs in Fate, TX

Plan on $3500 – $9000 for a wood fence in Fate, with most standard residential jobs landing in the middle of that range. Here’s what moves you toward either end.
- Linear footage and height: a 100-foot run at 6 feet sits near the low end; 200-plus feet at 8 feet pushes to the top.
- Site conditions: root-filled pasture grade, old farm debris, or a slope that needs stepped panels all add labor. This is the big swing factor on Fate lots.
- Material grade: treated pine versus cedar, and the picket profile you pick.
- Gates: a single walk gate is modest; a double driveway gate with hardware adds meaningfully.
- Demo and haul-off: removing an existing fence adds cost that a bare-lot install doesn’t carry.
Your written estimate itemizes posts, rails, pickets, concrete, gates, hardware, demo, and haul-off so you see exactly what you’re paying for. Upfront pricing, no surprises: the number you see is the number you pay. Finishing the yard alongside this often means homeowners pair it with Paver Driveways in Fate or Concrete Driveways & Concrete Work in Fate while equipment is already on site.
See the difference
Before
After
Before
After
Before
AfterWhat Fate Homes Specifically Do to a Wood Fence Job
Fate isn’t Rockwall. Where Rockwall is mature housing stock, Fate is a town mid-transition, shifting from ranch land into new subdivisions, and that changes the work. A large share of the lots we build on sit on former pasture, which means hitting root mass, uneven black clay, and occasionally old stock tank or farm debris in the post holes. The plat drawing says the grade is clean; the ground often disagrees, so we allow extra site prep and fill rather than skimping on post depth.
Then there’s the weather. North Texas straight-line winds and spring hail are real here, and a fence with 8-foot post spacing and no corner bracing is what you find leaning after a storm. We brace corners and gates and set posts deep enough to hold through a wet-dry clay cycle. Permits and HOA rules vary by subdivision in and around Fate, so we confirm setbacks and height limits before we cut anything. We cover the full Fate area, and if your project is bigger than the fence line, this is often part of a full Fence Installation in Fate plan.
Serving Fate, TX – Our Local Coverage Area
We serve Fate and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Wood Fence in Fate

A standard residential wood fence in Fate runs three to five working days once utilities are located. Pasture lots with heavy root mass or slope can push toward five days, and we tell you which category you’re in before we start.
It depends on your subdivision and height. Fences under the typical residential height limit often don’t need a permit, but many Fate HOAs require approval on height, style, and setback. We confirm the rules for your specific lot before we build. Call (888) 426-8078 and we’ll sort out what applies to you.
Most wood fences in Fate land between $3500 and $9000, depending on length, height, material, gates, and how much site prep the ground demands. Call (888) 426-8078 for an exact quote, estimates are free.
Not with a written itemized estimate and no change orders. If we hit something underground that the walk-through didn’t reveal, we stop and talk to you before adding cost. Upfront pricing means the number you see is the number you pay.
Every wood fence we install is covered by our 730-Day Done Right Promise. If a post, gate, or panel isn’t right, we make it right. Call (888) 426-8078 to talk through the details.
Get a Free Wood Fence Estimate in Fate
Call (888) 426-8078 for a free on-site estimate on your wood fence in Fate. A live person answers around the clock, and we’ll walk the line with you, check grade and site conditions, and hand you an itemized written quote with no surprises. Our technicians have up to 12 years of experience, arrive in uniform, and stand behind every job under the 730-Day Done Right Promise. For the wider scope, see our Fence Installation service.
Written by the team at Groundwork Construction Co.












