







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Mesquite: What the Job Costs and How It Runs
Replacing a vanity, retiling a floor or shower surround, and swapping fixtures in a Mesquite bathroom usually runs $9,000 – $28,000 for a full three-fixture room, or $800 – $3,000 if you’re only changing out the vanity cabinet and top. A vanity-only swap takes one to two days; tile and fixture work across a whole bathroom typically runs two to three weeks once tear-out starts. Call (888) 426-8078 for a free on-site estimate with line-item pricing before anything gets ordered.
How we run a vanity, tile and fixture job, stage by stage

Most contractors quote this work as one lump number and then disappear into a fog of “we’ll handle it.” Here’s the actual order of events, with the decisions you’ll be making and when.
Stage 1 – Walkthrough and written scope (day 0, about 90 minutes). We measure the vanity footprint, check the shutoff valves under the sink, and confirm whether the existing tile sits on a mortar bed or directly on subfloor. That single fact changes the demo timeline by a full day. You get a line-item estimate the same week: demo, prep, tile, setting materials, vanity, top, fixtures, labor, permit (if needed). Nothing goes on that sheet as “allowance” unless you’ve agreed to it.
Stage 2 – Selections locked before demo (3 – 7 days out). You pick the vanity width (30″, 36″, 48″, 60″ double), the countertop material, the tile format, and the fixtures. We won’t tear out a working bathroom until the vanity and tile are physically on site or confirmed with a ship date. This is the single biggest schedule killer on bathroom work – a backordered vanity stalls the whole job. Mesquite homeowners get treated to a lot of “8 to 10 weeks” surprise delays when a contractor orders late. We order early.
Stage 3 – Demo and prep (days 1 – 2). Old vanity and fixtures come out, tile comes up, and we inspect what’s underneath. On Mesquite’s older ranches, that’s where we find soft subfloor near the toilet flange or a slow leak that’s been staining the framing for years. We photograph everything and show you before we rebuild. Cement board or a waterproof membrane goes down next, with seams taped and corners sealed.
Stage 4 – Tile and vanity set (days 3 – 7). Floor tile goes down first, then wall tile or shower surround, then grout and cure. The vanity cabinet is set and leveled, the top is templated (for stone) or set (for quartz-composite or laminate), and the sink and faucet go in. Stone tops add 5 – 7 business days for fabrication. Tile setting itself is fast; the cure and grout schedule is what eats the calendar.
Stage 5 – Fixtures, trim, punch list (days 8 – 12). Toilet reset, shower trim and valve trim, mirror, towel bars, caulk, and a full water test. We walk the room with you, mark anything that needs a touch-up, and come back to finish it. The 730-Day Done Right Promise covers the workmanship from that walkthrough forward.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Vanity, tile and fixture options and what each one really costs you
Material grade is the second-biggest price lever after scope. Here’s what you’re actually choosing between, with the honest trade-off on each.
- Vanity cabinet – stock vs. semi-custom. Stock cabinets in 30″ to 60″ widths run roughly $400 – $1,200. Semi-custom (KraftMaid is a partner we work with regularly) runs $1,500 – $3,500 and lets you set drawer stacks for hair tools and cleaning supplies, which matters in a small Mesquite bathroom where floor space is tight. Stock is faster; semi-custom fits the room.
- Countertop – laminate vs. quartz vs. stone. Laminate tops run $150 – $400 and hold up fine for a guest bath. Quartz and granite run $600 – $1,800 for a typical 36″ to 60″ top, with stone adding a fabrication lead time. Porcelain slab is a newer option at $900 – $2,000 and resists staining better than either – worth considering in a hall bath used by kids.
- Floor tile – ceramic vs. porcelain vs. luxury vinyl. Ceramic runs $2 – $6 per square foot installed, porcelain $5 – $12, and LVT $4 – $9. Porcelain is denser and handles moisture and foot traffic better; ceramic chips more easily at edges. LVT is the fast option and the one we steer people toward when the schedule matters more than the look.
- Shower surround tile. Standard 4″ ceramic is the budget choice. Large-format porcelain (12″x24″ and up) looks cleaner with fewer grout lines and runs $8 – $18 per square foot installed. Natural stone needs sealing every year or two; porcelain doesn’t.
- Fixtures. A basic chrome faucet runs $80 – $200; a brushed nickel or matte black fixture from Kohler runs $200 – $500. Shower valves and trim sets run $150 – $600 depending on whether you’re keeping the existing valve body or replacing it. Replacing the valve means opening the wall – that’s a real cost jump, and we’ll tell you before you commit.
What Vanities, Tile & Fixtures cost in Mesquite, TX

A single-bathroom vanity, tile and fixture refresh in Mesquite runs $9,000 – $28,000 for the whole room, and a vanity-only replacement runs $800 – $3,000. The number moves on five variables:
- Room size and layout. A 5’x8′ hall bath lands at the low end. A primary bath with a double vanity and a walk-in shower pushes toward the top.
- Existing condition. Soft subfloor, a leaking valve, or tile set in a mortar bed adds demo and prep labor. On Mesquite’s 1950s – 1970s ranches, we find at least one of these on most jobs.
- Relocating plumbing or electrical. Moving the vanity drain or adding a GFCI outlet at the vanity adds $500 – $2,500 depending on how far and whether the wall has to open.
- Material grade. Stock cabinet and ceramic tile vs. semi-custom and porcelain is a $4,000 – $8,000 spread on the same floor plan.
- Permit scope. Cosmetic tile and vanity replacement generally doesn’t require a permit. Moving plumbing or electrical does, and that adds inspection scheduling to the timeline.
Every written estimate lists demo, prep materials, tile, setting materials, vanity, top, fixtures, labor, and permit fees separately. What it won’t list without us telling you: structural repair if we open a wall and find rot, or moving a drain you decide to move after demo. Anything outside scope is quoted in writing before we touch it. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhy Mesquite’s housing stock changes how this job goes
Mesquite is a built-out, largely post-war inner-ring Dallas suburb, and almost all the bathroom work here is renovation rather than new construction. Most of what we tear out was installed in the 1950s through the 1970s, which means tile set on a thick mortar bed, cast-iron drains, and shutoff valves that haven’t moved in decades. That’s a slower demo than a 2015 build. We plan for it, and we check the valves before we start rather than after the water’s running.
The clay soil under Mesquite swells and shrinks with the wet-dry cycle, and that constant movement shows up in bathrooms as cracked tile, out-of-level floors, and doors that don’t close. Before we set a single tile, we check the floor for slope and movement; if the subfloor is flexing, new tile will crack the same way the old tile did. That’s a prep cost, not a cosmetic one, and it’s why we don’t quote tile over a suspect floor without looking at it first.
Hail season is the other Mesquite constant, and it drives roof and exterior work side by side with interior renovations. Homeowners here often pair a bathroom refresh with Tile Roofing in Mesquite or Specialty Roofing in Mesquite after a storm, and we’ll scope both so the scheduling doesn’t collide. If your vanity and tile work is part of a wider project, you can see the full scope on our Bathroom Remodeling in Mesquite page, or read about how our Bathroom Remodeling service handles the whole room. We cover the full Mesquite area and the surrounding cities.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vanities, Tile & Fixtures in Mesquite

A vanity-only swap takes one to two days; a full bathroom with new floor tile, shower surround and fixtures takes two to three weeks. The calendar is driven by three things: demo time on an older Mesquite home, stone top fabrication (5 – 7 business days if you choose stone), and grout cure. Call (888) 426-8078 for a schedule estimate based on your actual bathroom.
Cosmetic replacement of a vanity, tile, and fixtures generally doesn’t require a permit. Moving plumbing, relocating electrical, or replacing a shower valve does, and that adds inspection scheduling to the timeline. We’ll tell you in the written estimate whether a permit applies and pull it for you if it does – permits pulled and inspections passed, no handshake deals.
Yes, in most cases. A new vanity in the same footprint can reuse the existing drain and supply lines, which keeps the job simple and the price at the low end. The catch is the drain location: if the new cabinet has a different rear cutout, we adjust the cabinet, not the wall. Moving the drain itself is a different scope and a different price, and we’ll quote it separately.
A vanity-only replacement runs $800 – $3,000; a full bathroom with new tile, vanity and fixtures runs $9,000 – $28,000. The low end covers a hall bath with stock cabinet and ceramic tile; the high end covers a primary bath with semi-custom cabinetry, stone tops, and large-format porcelain. Call (888) 426-8078 for an exact quote – estimates are free.
Workmanship on your vanity, tile and fixture installation is covered by the 730-Day Done Right Promise – if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Material warranties run per manufacturer, and we’ll walk you through each one at the selections stage so you know what’s covered and for how long.
Get a free estimate for Vanities, Tile & Fixtures in Mesquite
Call (888) 426-8078 and a live person answers, any hour. We’ll schedule a free on-site estimate, measure the bathroom, check the subfloor and valves, and hand you a line-item quote with no change orders and no surprises. If the job qualifies, the $1,000 Off Projects Over $10,000 promotion and 0% financing for 18 months apply at signing. Background-checked, uniformed technicians on every job.
Written by the team at Groundwork Construction Co.












