







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Mesquite, TX: What the Job Actually Involves
A chain link fence in Mesquite, TX typically runs $3500 – $9000 for a standard residential run, with most 150- to 200-foot backyard jobs landing in the $4500 – $6500 range. The work itself takes two to four days once materials are on site: posts set in concrete on day one, framework and mesh stretched on day two, gates hung and tensioned after. Call (888) 426-8078 for a free on-site estimate and a written, line-item quote before anything gets ordered.
How a Chain Link Fence Goes In, Start to Finish

Chain link is one of the few exterior jobs where the schedule is genuinely predictable. Here’s the sequence we run, and where your decisions land.
Day 1: Layout, utility locate, and post setting
We walk the property line with you and mark every post location, corner, and gate. Before a single hole gets dug, the 811 utility locate has to clear, which usually takes two to three business days once called in. Terminal posts at corners and gates get larger holes and more concrete than line posts because they carry the tension. That concrete needs 24 to 48 hours to cure, which sets the pace for everything after.
Day 2: Top rail, tension bands, and mesh
Fittings go on, the top rail threads through, and the mesh gets stretched with a come-along. A properly stretched chain link fence rings when you tap it. A loose one sags within a year and never recovers quietly. This is the stage where cheap hardware shows itself.
Day 3: Gates, tension, and cleanup
Gate frames hang, latches and hinges get set, and every tie wire and tension bar gets checked. We walk the whole run with you before we leave. That final walkthrough is where tension, gate swing, and post plumb get signed off in person.
Day 4 (if needed): Concrete work and hardscape tie-ins
Fences along a driveway apron or patio edge often need a fresh concrete curb or pad where the line meets the slab. Homeowners often pair this with Concrete Driveways & Concrete Work in Mesquite when the apron is cracked or heaving, since both get quoted from the same walkthrough.
Your decision points
- Before day 1: exact property line, gate placement, height, and finish.
- Day 1: whether anything gets set back from the easement.
- Day 2 – 3: gate hardware and whether you’re adding a walk gate alongside a drive gate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Galvanized steel, standard residential: the workhorse. Bare galvanized pipe and mesh hold up well in North Texas and cost the least per foot. Rust shows at cut ends and welds eventually, but it lasts decades.
- Vinyl-coated chain link: black or green coating over galvanized core. Adds roughly 15 – 25% to the material cost and looks far better against brick and landscaping. Coating can chip at tension bars, so inspect the tie-downs.
- Heights: 4-foot suits a front boundary or garden edge. 5-foot and 6-foot are the standard for dog containment and privacy screening. Taller means bigger posts and more concrete, so price climbs with height.
- Gauge of mesh: 11.5-gauge is the residential standard. 9-gauge is heavier and worth the upgrade if you have large dogs or expect impact from mowers and storms.
- Gates: a 4-foot walk gate and a 10- to 12-foot drive gate are typical. Self-closing hinges and a drop rod on wide gates add cost but prevent sag.
- Rails and top caps: a tension wire instead of a top rail saves money on long straight runs; a top rail looks cleaner and holds shape better around corners.
What a Chain Link Fence Costs in Mesquite, TX

For a typical residential chain link fence in Mesquite, plan on $3500 – $9000. Most homeowners land between $4500 and $6500. Five things push a job toward either end of that range:
- Linear footage: the biggest lever. A 100-foot run and a 300-foot run share setup costs, so the longer run is cheaper per foot.
- Height and gauge: a 6-foot heavy-gauge run with a top rail can run 30 – 40% more than a 4-foot standard install over the same footage.
- Terrain and clearing: Mesquite’s clay soil can be hard as brick in a dry spell. Any old fence, brush, or concrete footing in the way adds demo and disposal.
- Gate count and width: a single walk gate is one number. Two drive gates with heavy hardware is another.
- Hardscape conflicts: fences that need a concrete curb or a cut pad where the line meets a driveway add real cost.
A written estimate should list footage, post spacing, gauge, height, gate hardware, and disposal. It should not hide a “miscellaneous” line. Upfront pricing, no surprises is the rule: the number you see is the number you pay. The estimate is free, and financing is available at 0% for 18 months if the project is part of a bigger scope. For a broader look at the whole fence program, see our Fence Installation service.
See the difference
Before
After
Before
After
Before
AfterWhat Mesquite Homes Specifically Do to This Job
Mesquite is a built-out inner-ring suburb where nearly every fence call is a replacement, not a new build. That changes the job. The housing stock is dominated by 1950s – 1970s single-family ranches and brick-veneer tract homes, and a lot of the fences standing on those lots are original or a second generation. We pull out galvanized posts so rusted at the ground line that the pipe snaps when we lever it free.
The bigger issue is the black clay soil. It swells and shrinks with every wet-dry cycle, and a fence set in shallow footings will lean within a season. We set posts below the active clay layer and use more concrete than the minimum on terminal and gate posts. Spring hail and high wind add another layer: chain link survives wind far better than wood, but a hailstorm will dent top rails and flatten gates if the hardware is cheap. Along the I-30 and 635 corridors and in neighborhoods like those around Samuell Farm and the older streets near downtown Mesquite, tight side yards limit access, so we plan equipment and material staging before day one. For the wider project scope this often sits inside, see Fence Installation in Mesquite.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in Mesquite

Most residential runs are finished in two to four days, with the first day set aside for utility locate and post setting. Concrete cure time is the biggest pace-setter, so plan on a few days between the first dig and the final gate hang. Call (888) 426-8078 to lock in a start date around your schedule.
Most residential chain link fences in Mesquite do not need a building permit, but a fence on or near a property line or easement can. We confirm what applies to your lot before ordering material. If a permit is required, we handle the filing and the inspection. Call (888) 426-8078 and we’ll check your specific address.
Yes, and it’s one of the most common configurations in Mesquite. When the fence line meets a driveway or patio, we cut and set a concrete curb or pad so the posts don’t sit in bare clay. Homeowners often pair this with Asphalt Driveways & Resurfacing in Mesquite when the driveway is due for a refresh. Call (888) 426-8078 to quote both in one visit.
Residential chain link in Mesquite runs $3500 – $9000, with most jobs in the $4500 – $6500 range depending on footage, height, gauge, and gates. You get a written line-item quote before any material is ordered, so the scope is in writing. Call (888) 426-8078 and we’ll walk the property and price it exactly.
Every chain link fence we install in Mesquite is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers post setting, tension, gate alignment, and hardware. If a post leans or a gate sags inside that window, we fix it. Call (888) 426-8078 to start your estimate.
Get a Free Chain Link Fence Estimate in Mesquite
We cover Mesquite and the surrounding area with on-site estimates for chain link fence work, including Balch Springs, Sunnyvale, Seagoville, and Garland. Call (888) 426-8078 and a live person answers, any hour. We’ll walk the property line, confirm utility locate timing, and leave you with a written line-item quote. No pressure, no guesswork.
Written by the team at Groundwork Construction Co.












