







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Rowlett, TX: What It Costs and How Long It Takes
A tub-to-shower conversion in Rowlett usually runs $3,500 to $10,000 and takes three to five working days once the materials are on site. We pull the old tub, prep the alcove, set a new waterproofed shower pan and walls, and reset the valve and trim. Most conversions stay in the original 60-by-30-inch footprint, so the plumbing rarely moves. Call (888) 426-8078 for a free on-site estimate.
How a Conversion Actually Runs, Day by Day

People picture a quick swap. In practice it’s a short, sequenced job with a few fixed checkpoints, and knowing them keeps you from being surprised. Here’s the real order of work.
Stage 1: Layout and demo (day one)
We protect the floor and hallway, shut off water at the fixture, and remove the tub, surround, and any old backer. On much of Rowlett’s 1980s and 1990s housing stock, the original tub sits in a greenboard-and-mastic surround that has been quietly absorbing moisture behind the tile for years. We open the wall to check for soft framing. You decide at this point whether to keep the current valve or replace it.
Stage 2: Rough-in and valve work (day one to two)
The drain gets relocated to the center of the new pan, the valve is set to the right depth for the new trim, and any framing or blocking gets added for grab bars or a seat. If you’re adding a niche or bench, the framing happens here. This is the stage where a small scope change, like shifting the drain a few inches, happens before walls close.
Stage 3: Waterproofing and pan (day two)
We set a sloped, waterproofed pan and apply a bonded membrane or cement board with a liquid-applied waterproof layer over the walls. This is the layer nobody sees and every leak traces back to, so we don’t rush it. Cure time before tile is a set number of hours, not a guess. You’ll pick your wall material and tile layout around this point.
Stage 4: Tile, trim, and glass (days three and four)
Wall tile goes up, grout cures, and the valve trim, showerhead, drain cover, and any glass panel get set. Glass that’s cut to the opening adds a day for templating and install. If you chose a prefab wall system instead of tile, this stage compresses to a single day.
Stage 5: Final inspection and walkthrough (day four to five)
We run a water test, check the pan slope and drain, verify the valve, and walk the job with you. Permitted work gets its inspection signed off. Every conversion we complete carries our 730-Day Done Right Promise; if something isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape Your New Shower
Most of the cost and character of the job comes down to a handful of decisions you’ll make in the first two days. Here’s the honest trade-off on each.
- Wall material: Ceramic or porcelain tile over a waterproofed substrate is the standard and gives you the widest design range, though it takes the longest to install and needs periodic grout care. A solid-surface or acrylic wall system installs fast, cleans easily, and costs less, but it limits your finish choices.
- Base: A tiled mud-set pan looks seamless and lasts for decades; it also costs more and depends entirely on correct waterproofing. A prefab acrylic or composite pan is lighter, faster, and dependable, and it comes in a set of stock sizes that may not match an odd alcove.
- Glass: A frameless fixed panel opens the room visually and costs more than a framed door or a simple curtain rod. Custom-templated glass adds a day; stock sizes save money but fit fewer openings.
- Fixtures: A new pressure-balance valve with a Kohler or similar trim gives you consistent temperature and a long service life. Reusing the old valve saves a few hundred dollars, but you’ll be back into the wall sooner.
- Accessibility: A low curb, a bench, blocking for grab bars, and a handheld shower cost a bit more now and make the shower usable for the long haul. This matters in single-story homes where owners plan to stay put.
What Tub-to-Shower Conversion Costs in Rowlett, TX

For Rowlett, a tub-to-shower conversion typically lands between $3,500 and $10,000. A straight swap in the existing footprint with a prefab pan and acrylic walls sits near the low end. A tiled shower with frameless glass, a new valve, and accessibility features pushes toward the top. The number moves with five things: the size of the alcove, the condition behind the old surround, whether plumbing or framing moves, the grade of tile and fixtures, and how much of the job is permitted.
| Line item | Typical Rowlett range |
|---|---|
| Basic conversion, prefab pan and walls, keep valve | $3,500 – $5,500 |
| Mid conversion, tile walls, new valve, framed door | $5,500 – $8,000 |
| Premium conversion, tiled pan, frameless glass, bench | $8,000 – $10,000 |
| Hidden rot or framing repair (add-on) | Quoted after demo |
A written estimate covers demo, waterproofing, pan, tile or wall system, fixtures you select, and cleanup. It usually excludes major plumbing relocation, structural repair, and glass beyond standard sizing. We price those in writing before work starts, so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Rowlett Homes Do to This Job
Rowlett grew up fast, mostly farmland turned subdivision from the 1980s into the 2000s, and that build era shows up in the bathroom the moment we open a wall. In the Waterview and Peninsula neighborhoods, we routinely find original tub surrounds where years of steam got behind the tile and softened the framing. That’s the hidden repair that turns a straightforward conversion into a two-day fix. Rowlett’s blackland soil, which swells and shrinks through our wet and dry cycles, also leaves its mark indoors: we check for cracked tile beds and uneven floors around the drain before we set a new pan, because a pan set on a shifting slab will crack. Homes a short walk from Lake Ray Hubbard often carry extra moisture and need a closer look at ventilation. Rowlett’s tighter lots and mature trees rarely affect a bathroom job, but knowing the housing here means we plan the demo around what’s actually behind the wall. If your project widens into a full Bathroom Remodeling in Rowlett, we scope that separately; conversion work is one piece of our Bathroom Remodeling service. We cover Rowlett and the surrounding towns like Sachse, Garland, Wylie, and Rockwall. Some homeowners pair an exterior upgrade with their interior work, and we also handle Metal Roofing in Rowlett and Tile Roofing in Rowlett when a roof is due.
Serving Rowlett, TX – Our Local Coverage Area
We serve Rowlett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in Rowlett

Plan on three to five working days once materials are on site. A prefab-wall conversion finishes near the short end, and a fully tiled shower with custom glass lands near five. Call (888) 426-8078 for a free estimate and a timeline for your specific bathroom.
It depends on the scope. A simple fixture swap in the same location may not require one, but moving the drain, valve, or wall does. We pull the permits and pass the inspections where they apply, and we’ll tell you upfront which side of that line your job falls on. Call (888) 426-8078 to sort it out.
In most cases, yes. If the new shower keeps the original alcove size, the drain and valve usually stay put and the cost stays low. Relocating plumbing or knocking out a wall pushes the job toward the top of the range. We confirm the footprint during the free estimate and quote it in writing.
The gap is almost always waterproofing and what’s behind the wall. A bid that skips a real pan waterproofing or assumes no rot will look cheap until it fails. Our estimate is line-item and fixed, backed by the 730-Day Done Right Promise. Call (888) 426-8078 for an exact quote.
Our workmanship is backed by the 730-Day Done Right Promise for two full years after the job, and manufacturer warranties cover the fixtures and materials you select. If anything we installed goes wrong in that window, we make it right. Call (888) 426-8078 to get started.
Get a Free Tub-to-Shower Conversion Estimate in Rowlett
We’ll come out, measure the alcove, look behind the existing surround, and hand you a written line-item price for your conversion, with no obligation. Call (888) 426-8078 to schedule your free estimate, and a live person answers any time. We serve Rowlett and the nearby towns, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.












