







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Fate, TX: What It Involves and What It Costs
A tub-to-shower conversion in Fate, TX runs $3,500 – $10,000 for most jobs and takes three to seven working days from demo to final walkthrough. The work means pulling the tub and its surround, rebuilding the wet area with a waterproofed shower pan and tile or a prefabricated wall system, and reconnecting the drain, valve and trim. Call (888) 426-8078 and we’ll walk your space and put a written line-item number in your hands.
How our tub-to-shower conversion process actually runs, stage by stage

Nothing here is a mystery once you’ve seen it happen. Here’s the real order of operations for a Fate conversion, including where your decisions land.
Stage 1: Walkthrough and written scope (day 0, about 60 minutes)
We measure the alcove, check the valve and drain location, and look at what’s behind the existing surround, since a 1990s tub deck and a recent builder-grade unit fail very differently. You decide the wall system and pan type at this visit, because that choice sets the lead time. You get an itemized estimate before anyone touches a tool.
Stage 2: Demo and haul-out (day 1, four to six hours)
The tub, surround and any glass come out, and we protect the floor and vanity on the way. If the closet or a wall has to open for valve access, that’s cut here. Old tubs leave the same day.
Stage 3: Rough-in and framing (day 1 into day 2)
We set the drain to the new pan, shift the valve to shower height, and add blocking for grab bars or a seat if you want them. This is the stage that decides whether your job stays at the low end or climbs: moving the drain a few inches is routine, relocating the whole wet wall is not. Framing gets squared and inspected where the scope calls for it.
Stage 4: Waterproofing and tile or panel install (days 2 through 4 or 5)
A bonded waterproof membrane goes down and cures before anything else. Then tile, grout and trim, or your prefabricated wall panels, which you’ll have chosen back in Stage 1. A flood test on the pan is standard on our jobs; you’re welcome to see it before we close up.
Stage 5: Trim, glass and final walkthrough (day 5 to 7)
Valve trim, showerhead, door or curtain rod, and caulk lines go in. We run water, check for leaks, clean up, and walk the finished shower with you. Your 730-Day Done Right Promise starts on that walkthrough. Most Fate conversions land inside a single week of active work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between for a Fate shower
Four decisions shape both the look and the budget. Here’s the honest trade-off on each.
- Prefabricated acrylic or fiberglass unit ($3,500 – $6,000 installed): Fastest path, one-piece pan and walls, minimal grout to maintain. It suits a rental, a kid’s bath or a budget-first job. It won’t take a custom look, and a hard impact on a hollow wall section is harder to repair.
- Tiled walls over a waterproofed pan ($6,000 – $10,000): The choice most Fate homeowners land on. You pick the tile size, grout and layout, and it holds up for decades. It takes longer and costs more, and large-format tile raises labor because of the substrate work.
- Shower pan material: A tiled mud-set pan gives you a custom slope and matches the walls; a preformed pan is quicker and cheaper but limits your footprint and curb height. Either works; the tiled pan is the more forgiving long-term choice in a busy household.
- Fixtures and glass: Kohler and similar valve-and-trim lines sit at the reliable middle. A curbless entry, a bench, or frameless glass raises the number. Decide on the glass at walkthrough, since a framed door versus a frameless panel changes the measurement, not just the price.
What a tub-to-shower conversion costs in Fate, TX

Most Fate conversions run $3,500 – $10,000. That’s the real spread, and the difference between the bottom and top of it comes down to five things:
- Size and footprint: A standard 60-inch alcove stays at the low end. A larger walk-in footprint or a curbless design adds labor and material.
- Existing condition: A tub pulled out cleanly is simple. Rotted subfloor or a failed old pan means repair before install.
- Moving plumbing or electrical: Shifting the valve is routine. Relocating the drain or adding a vent, light or fan circuit pushes the number up.
- Material grade: Prefab unit versus tiled walls, entry-level trim versus premium fixtures, framed versus frameless glass.
- Permit scope: A permit and the inspection that goes with plumbing changes add a fixed cost to the job.
What’s included in a written estimate from us: demo and haul-out, drain and valve rough-in, waterproofing, wall and pan finish, trim, glass or door, cleanup and the 730-Day Done Right Promise. What usually isn’t: hidden rot or subfloor repair found at demo, and any structural change. We price those as a written change order you approve before work continues, never as a surprise line at the end. Ask about 0% financing for 18 months and $1,000 off projects over $10,000 if you’re weighing a bigger scope.
See the difference
Before
After
Before
After
Before
AfterWhat Fate homes specifically do to this conversion job
Fate sits at a particular seam. The town is small and growing fast in Rockwall County, with large subdivisions of 2000s-to-2020s brick-and-stone tract homes going up on land that was pasture a few years back. That matters for a bathroom conversion. The master bath in these newer builds is usually a garden tub with a separate shower already, or a builder-grade tub-and-surround unit, and the fixtures are original builder spec. We’re often working on original tile and original valves, not a 1980s remodel of a 1980s house. The black clay soil here swells and shrinks with wet and dry cycles, and slab movement shows up as cracked tile or a grout line that’s opened at the alcove. When we demo, we check the subfloor at that seam before we cover it. A permit for the plumbing work is normal on our Fate jobs, and the inspection covers the rough-in before the walls close. You’ll also want to check your HOA rules on exterior venting and any visible changes if you’re adding a fan, and homeowners often pair the bathroom work with our Bathroom Remodeling in Fate when the scope widens beyond the shower.
We cover Fate and the surrounding towns, and when the roof or the exterior is due at the same time, some folks handle both in one project and pair this with Metal Roofing in Fate or Tile Roofing in Fate, since hailstorms and straight-line winds are a real driver on these builds. Need the wider job? Our Bathroom Remodeling service handles the full room from foundation to finish line.
Serving Fate, TX – Our Local Coverage Area
We serve Fate and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: tub-to-shower conversion in Fate

Most take three to seven working days of active construction, with a prefab unit at the short end and a fully tiled, glass-enclosed shower at the long end. The clock starts after your materials arrive, so the lead time on tile and glass matters as much as the labor. Call (888) 426-8078 and we’ll give you a real start-and-finish window.
Yes, in most cases, if the drain or valve is being reconfigured, the work needs a permit and an inspection of the rough-in before the walls close. We pull the permit and schedule the inspection as part of the job, so you’re not chasing paperwork. Call (888) 426-8078 to talk through your specific scope.
Often, yes. If the drain and valve can stay in place and the pan fits the existing footprint, the conversion is simple and stays at the lower end of the range. When the drain has to move, that’s a real change in scope; we tell you before the estimate is signed. Call (888) 426-8078 for a look at your layout.
Expect $3,500 – $10,000, with the spread driven by tile vs prefab, footprint size, condition behind the walls, and whether plumbing moves. Material grade and glass choices move it the most. Call (888) 426-8078 for an exact written quote; estimates are free.
Every conversion we complete is backed by the 730-Day Done Right Promise, which covers our workmanship for two full years and longer: if it’s not done right, we make it right. The number you see on the estimate is the number you pay, and any hidden-condition change gets your approval in writing first. Call (888) 426-8078 with questions before you commit.
Get your tub-to-shower conversion priced in Fate
Call (888) 426-8078 for a free on-site estimate in Fate. We’ll measure the alcove, look at what’s behind the surround, and hand you a written line-item estimate with your material options priced side by side. Calls are answered by a live person around the clock, technicians arrive background-checked and in uniform, and the price we write is the price you pay.
Written by the team at Groundwork Construction Co.












