







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Wylie, TX: What It Takes and What It Costs
Most tub-to-shower conversions on Wylie homes run $3,500 to $10,000 and take three to six working days once the tile and shower system are chosen. The job means pulling the tub and its surround, capping or re-routing the drain, rebuilding the wet wall and floor, and setting a new shower base and valve. Every conversion we quote is a written line-item estimate, and our calls are answered by a live person around the clock at (888) 426-8078, so you can get a real number before anything gets demoed.
How a Tub Becomes a Shower: The Sequence We Follow

No two conversions follow the exact same clock, but the order of operations is fixed. Here’s what a typical Wylie job looks like, day by day, so you know what to expect and where your decisions land.
Stage 1: Site protection and demo (half a day to one day). We mask floors and hallways, shut off the water, pull the tub, surround, and any tub deck. If the existing drain is a standard 1.5-inch tub drain, it gets swapped for a 2-inch shower drain; that’s the first plumbing decision, and it’s usually the one that surprises homeowners who expected a simple drop-in. We haul the old tub out the same day, so it isn’t sitting on your curb in Wylie heat all week.
Stage 2: Framing, rough plumbing, and electrical (one day). The old valve is replaced with a pressure-balance or thermostatic shower valve, and the wall cavity is opened just enough to move the drain and set the correct rough-in depth. This is where you decide whether the shower head moves from the tub position to a different wall, and whether a niche or a bench gets framed in. If you want a seat, this is the day it gets built; adding one later means tearing out fresh tile.
Stage 3: Waterproofing (one day). We hang cement board, tape and coat the seams, and roll on a bonded waterproofing membrane over the walls and floor, with the corners and drain flange sealed. Waterproofing is inspected before any tile goes up, and it’s the step that quietly determines whether a Wylie shower is still dry at the wall studs after five summers of clay movement and humidity swings. If your job requires a permit, this is typically the inspection point.
Stage 4: Tile, base, and grout (one to two days). Pan tile or a prefabricated base gets set, walls are tiled, and grout goes in. Cure time matters; we don’t grout and then seal the same afternoon. You’re choosing base type, tile size, and grout color on day one of this stage, so bring your selections to the estimating visit.
Stage 5: Fixtures, glass, and punch (half a day to one day). We install the valve trim, shower head, hand-held, and glass door or panel, seal the perimeter with 100% silicone, and test the drain and pressure balance. Then we walk the job with you and hand over the written warranty on the finished work.
Our technicians bring up to 12 years of experience to a conversion, and the work is backed by our 730-Day Done Right Promise: if something we installed fails, we make it right. That’s the accountability piece most homeowners in Wylie are actually shopping for after a bad experience with a previous contractor.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape Your Wylie Shower
The reason two Wylie tub-to-shower conversions can differ by $4,000 is almost always the spec sheet, not the labor. Here’s what you’re picking between and what each choice actually buys you.
- Shower base: prefab vs. tiled pan. A prefabricated acrylic or fiberglass base is faster, less expensive, and easier to keep clean, but the finish options are limited. A tiled pan with a linear drain looks custom and can run wall-to-wall, but it adds installation time and needs solid waterproofing to hold up. Most of our Wylie customers grid the base tile to match the walls, which we can do.
- Wall material: tile vs. solid-surface panels. Porcelain or ceramic tile is the default and gives you the widest design range. Solid-surface panels (think cultured marble or acrylic sheet) install in less time and have fewer grout lines to scrub, which is worth considering in a family bath. The trade-off is fewer design choices and a more manufactured look.
- Fixtures: the Kohler or Moen level. A basic builder-grade valve and trim set works, but the finish and cartridge quality on a Kohler or Moen valve often outlasts the builder-grade version by years. If you’re already spending the money to open the wall, this is where the upgrade actually pays for itself.
- Glass and enclosure. A framed sliding door costs less; a frameless or semi-frameless panel with a hinged door costs more but opens the space visually. On a Wylie tub footprint, the glass choice often makes the shower feel a foot wider than it is, which matters in tight bathrooms.
- Size of the footprint. A standard 60-inch tub alcove accommodates a 60-inch shower, no more. Expanding beyond that means taking wall space from somewhere, and that’s a structural and layout decision, not a finish choice.
- Accessories: bench, niche, grab bars. A built-in bench and recessed niche add framing and waterproofing time but are worth adding when you’re aging in place or have kids. Grab bars are cheap insurance and can be added later if you plan for blocking now.
What Tub-to-Shower Conversion Costs in Wylie, TX

In Wylie, a tub-to-shower conversion runs $3,500 to $10,000, with the middle of that range sitting around $6,500 for a standard alcove with tile walls, a prefab base, and mid-grade fixtures. The line items in a written estimate look like this:
| Item | Typical Range |
|---|---|
| Demo, haul-away, and site protection | $400 – $900 |
| Rough plumbing and valve replacement | $600 – $1,500 |
| Waterproofing and base installation | $700 – $1,800 |
| Tile and finish work | $1,200 – $4,000 |
| Fixtures (valve, trim, head, glass) | $500 – $1,800 |
Four things push a job toward the top of the range: moving the drain or relocating the shower head; opening a wall to correct old plumbing or rotted framing; upgrading from a prefab base to a tiled pan with a linear drain; and any item that requires a permit and inspection. A job that stays in the same footprint, reuses the existing drain location, and picks mid-grade tile and fixtures lands near the bottom. If the shower shares a wall with a full Bathroom Remodeling in Wylie scope, we price the conversion line by line so you can see exactly what the shower portion costs on its own.
Our pricing is upfront and fixed before demo, with no change orders unless you add scope. Projects over $10,000 qualify for our $1,000 off standing offer, and 0% financing for 18 months is available on approved credit. Every estimate spells out what’s included (demo, plumbing, waterproofing, tile, fixtures, final walkthrough) and what isn’t (structural repairs discovered mid-demo, specialty stone tile upgrades, and any relocation of the toilet or vanity that falls outside the shower footprint).
See the difference
Before
After
Before
After
Before
AfterWhat Wylie Homes Specifically Do to This Job
Wylie has been one of the fastest-growing suburbs in the Dallas – Metroplex, and that growth shows up in the housing stock we work on. The bulk of the tub-to-shower conversions we quote here are in 2000s-to-present single-family homes across 75098, on former blackland prairie pasture. That matters because these homes sit on post-tension slab-on-grade foundations over expansive clay that swells in wet springs and shrinks hard in dry summers. When a slab has moved, interior door frames rack, and shower surrounds crack at the seams. We check the corners and the pan-to-wall joint before we quote, because a cracked surround on a 15-year-old Wylie house often signals movement rather than a bad tile job. On the shrinking core of mid-century ranches near downtown Wylie along FM 544 and Highway 78, the story flips; those bathrooms were built around cast-iron drain lines, and replacing the tub means we’re cutting out rusted fittings and often re-piping the drain to 2-inch PVC. Newer builds usually avoid that cost. If your conversion turns up cracked framing or a foundation issue, that’s a conversation for a full Bathroom Remodeling scope rather than a shower swap, and we’ll tell you straight which one you’re looking at.
Serving Wylie, TX – Our Local Coverage Area
We serve Wylie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Wylie

Plan on three to six working days from demo to final walkthrough. The timeline stretches when the tile or shower system needs to be ordered (a week or more on special order), when plumbing has to be re-routed, or when the job requires a permit and inspection. We schedule the demo and tile stages back to back so you’re not shower-less for two weeks. Call (888) 426-8078 for a set schedule with dates on it.
Usually yes when the drain, valve, or electrical work is being changed, because that’s plumbing and electrical scope under the adopted code. A straight tile-and-fixture swap in the same footprint sometimes doesn’t trigger one. We pull the permit and meet the inspector on your behalf, and our written estimate states plainly whether a permit is included. Call us at (888) 426-8078 and we’ll tell you what your specific job requires before you commit.
Yes, and staying in the original tub alcove is the most affordable way to do it. Keeping the drain location and re-using the existing valve rough-in means less wall-open time and fewer surprises. The trade-off is that the shower is limited to the original 60-inch alcove width. Moving the drain to a linear-drain arrangement or a curbless setup adds $1,000 to $2,500 to the job. Call (888) 426-8078 to talk through whether moving plumbing is worth it in your bathroom.
The range is $3,500 to $10,000, with most jobs landing near $6,500. Variables that push the price up: moving the drain or shower head, correcting hidden plumbing or rotted framing, upgrading to a tiled pan with a linear drain, specialty stone tile, and any structural repair discovered after demo. Call (888) 426-8078 for an exact line-item quote; estimates are free.
Every tub-to-shower conversion we complete is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. That covers the installation itself: waterproofing, tile, plumbing connections, and fixture installation. If something we installed fails within that window, we come back and make it right. Call (888) 426-8078 with your project details and we’ll put the warranty terms in writing with the estimate.
Get a Free Tub-to-Shower Conversion Estimate in Wylie
Call (888) 426-8078 to schedule your free on-site estimate for a tub-to-shower conversion in Wylie. A live person answers around the clock, and on the call we’ll set a visit time, confirm what you want in the shower, and answer the permit question for your address. The visit itself takes about 45 minutes, and you’ll walk away with a written line-item estimate for the shower alone, whether or not you pair it with work on the rest of the bath. Our crews are background-checked and arrive in uniform, ready to measure.
Written by the team at Groundwork Construction Co.












