







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron fence in Wylie, TX typically runs $3,500 – $9,000 for a standard residential run, with most single-gate front-yard installs landing between $4,800 and $6,700. That covers materials, post-setting in our clay, and a walkthrough at the end. Call (888) 426-8078 and we’ll put real numbers to your property line, free.
Wylie isn’t a town where fences go in on flat, easy ground anymore. Subdivisions off FM 544 and Highway 78 sit on ground that was pasture not long ago, and the blackland prairie clay under it moves a lot between wet springs and dry summers. An iron fence here works only if the posts are set to account for that movement instead of fighting it. That’s the whole job, honestly. The panels and finials are the visible part; the underground work is what keeps a Wylie fence standing straight ten summers from now.
What an iron fence project in Wylie actually involves
Here’s the short version before the detail: we survey the line, set posts in concrete below the clay’s active zone, weld or bolt the panels, and finish with a gate that swings true. A typical 100-to-150 linear-foot run takes two to four working days on site, with a few weeks of lead time between the estimate and the install depending on the style and finish you pick. The number you hear on the estimate is the number you pay, and every install is backed by our 730-Day Done Right Promise.
How an iron fence goes in, stage by stage

We run this the same way every time because the sequence is what protects the fence from Wylie soil.
Stage 1: On-site measure and line check (day 1, about an hour)
We walk your property line with you and measure the run, gate openings, and any corners or grade changes. We also look at what’s underground: irrigation lines, gas service, and the slab edge if you’re fencing close to the house. You’ll decide right here whether you want the fence on the property line or set back, which matters in subdivisions where plat lines aren’t exactly where the grass suggests. If you’re fencing as part of a broader yard plan, this is also where we talk through Fence Installation in Wylie as a larger scope.
Stage 2: Layout, call-before-you-dig, and HOA paperwork (days 1 – 5)
We mark post locations with paint and flags, then submit the utility locate request so nothing gets hit. If your subdivision has architectural review, you’ll need approval on style, height, and finish before we set steel. We hand you the drawing and spec sheet you need for that submission; getting it in front of the committee early is the single biggest schedule saver on iron fence work in Wylie.
Stage 3: Post holes and concrete (one to two days)
Holes go down 24 to 36 inches depending on post height and wind load, wider at the bottom, and we set each post in concrete mixed on site. We don’t pour all the posts and hang panels the same afternoon. The concrete needs to cure before you load a welded panel onto it, or the whole run racks out of plumb. This is the stage that most cheap fence bids skip, and it’s the one that fails first.
Stage 4: Panels, rails, and gates (one to two days)
Once the posts are set, we hang the panels, level the rails, and install the gate with hinges rated for the weight. If you chose an ornamental aluminum gate with a self-closing hinge, we set the tension and check the swing through its full arc. You’ll want to be home at the end of this day so we can walk the gate with you and adjust anything that doesn’t feel right.
Stage 5: Finish touch-up and final walkthrough (half a day)
We touch up any scratched powder coat with matching paint, clean up all concrete splatter and spoil, and walk the full line with you. We check post plumb, gate latch, and panel spacing, and we document the install in writing so the 730-Day Done Right Promise is on record for your property. If you’re also reworking the hardscape out back, homeowners often pair this with Patios, Walkways & Pool Decks in Wylie so the whole yard comes together in one schedule.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make on an iron fence
Most of the decisions on an iron fence come down to material, gauge, and how you finish it. Here’s what we walk through with every Wylie homeowner:
- Wrought iron vs. ornamental aluminum. True wrought iron is heavier, denser, and costs more, and it needs repainting every few years because rust will find the welds. Ornamental aluminum is lighter, comes powder-coated, and holds up better to North Texas sun and hail without rust. For most subdivision lots, aluminum is the practical pick and the price reflects it. Genuine wrought iron suits homeowners who want the heavier look and don’t mind the maintenance.
- Gauge and tube wall thickness. A 14-gauge picket looks the same from the street as a 12-gauge one, but the 12-gauge holds up far better to a dog leaning on it or a hail strike. The lighter gauge is where the low-end quotes come from. You’ll feel the difference in a decade.
- Finish and color. Standard black powder coat is the default and the cheapest. Custom colors, including bronze and dark green, add cost and lead time, and darker finishes show dust and pollen in Wylie’s spring. If you go custom, expect two to three extra weeks.
- Gate style and hardware. A walk gate with a self-closing hinge and a keyed latch is what most homeowners want for security. Drive gates add significant cost because the frame has to carry the span, and the hardware has to match the weight.
- Height and picket spacing. Four feet is a common decorative height and won’t keep a determined dog in. Five feet with tighter picket spacing is the usual security spec. Some Wylie HOAs cap front-yard height, so we check before we order.
What an iron fence in Wylie, TX costs

For a standard residential iron fence in Wylie, plan on $3,500 – $9,000. The line-item range breaks down roughly like this:
- Ornamental aluminum, 4 ft, basic style: $3,500 – $5,800 for 100 to 150 linear feet
- Ornamental aluminum, 5 ft with tighter pickets: $4,500 – $7,200
- Wrought iron, 5 ft: $6,200 – $9,000
- Walk gate with self-closing hinge and keyed latch: $450 – $900 per gate
- Drive gate, single swing: $1,400 – $2,800
- Post-and-panel reset for an existing fence on new footings: $300 – $600 per post
What pushes a job toward the high end: heavy gauge steel, unusual runs with many corners or slope changes, custom color, multiple gates, and lots of demolition of an existing fence. What keeps it low: a straight, level run on a clean lot with standard stock panels and one walk gate.
A written estimate from us itemizes panels, posts, concrete, gates, hardware, and haul-off. What it doesn’t include is hidden utility relocation, an engineered retaining wall if your grade is steep, or HOA submission fees. We tell you that up front so nothing shows up as a change order. The number you see is the number you pay, and 0% financing for 18 months is available if you’d rather spread the cost. Projects over $10,000 take $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Wylie homes specifically do to this job
The housing stock here is what makes iron fence work in Wylie different from fence work in older, built-out suburbs to the west. Most of what we install sits on 2000s-to-present single-family lots in subdivisions on former blackland prairie pasture. Those lots were graded off the surrounding field, and the clay under them still expands and contracts hard through a wet spring and a dry August. Post footings here have to go below the active soil zone, not just an easy two feet. We see it every year: a fence set shallow goes through its first dry summer fine and starts leaning by the second or third. The mid-century ranch homes near downtown Wylie on FM 544 and Highway 78 are a different story, with tighter lots and older utilities near the line, so the locate before we dig matters more there.
HOA review is its own step in most Wylie subdivisions, and it usually runs a week or two on the front end. Starting that paperwork before the panels are ordered is what keeps a three-week project from stretching to six. If your lot has an ADU or is being prepped for one, homeowners often pair this with ADU Design & Permitting in Wylie so the fence line and the new structure are planned together. We cover the full Wylie area, and our fence installation service includes the survey, the locate, the install, and the final walkthrough.
Serving Wylie, TX – Our Local Coverage Area
We serve Wylie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – iron fence in Wylie

Two to four working days on site for a typical 100-to-150-foot run, with a few weeks of lead time between the estimate and the install depending on the style and finish you choose. The wait on the front end is mostly panel fabrication and HOA approval. Call (888) 426-8078 to get on the schedule and we’ll give you a real install window with your estimate.
Most residential fences under the local height limit don’t require a building permit, but they do have to meet the subdivision’s HOA design review and the city’s fence height and setback rules. We check both before we order panels and hand you the drawing you need for the architectural committee. If your lot has special conditions, like a fence near a floodplain edge or an easement, we flag that at the estimate. Call (888) 426-8078 and we’ll confirm the rules for your specific lot.
Yes, if it’s set right. The key is footing depth below the active clay zone and concrete mixed on site, not the bagged mix poured dry into the hole. Ornamental aluminum with a good powder coat handles North Texas hail better than bare steel, and it won’t rust like wrought iron will. Our technicians have up to 12 years of experience setting posts in this kind of soil. Call (888) 426-8078 for a site evaluation.
In most cases, yes. We hand-dig where it matters and protect beds and turf with plywood along the run, and the concrete spoil gets hauled off. If a mature tree or irrigation line sits on the property line, we work around it or shift the post, and you decide that at the measure. Call (888) 426-8078 and we’ll walk the line with you before any digging starts.
Every install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a post leans, a gate sags, or a panel comes loose within that window, we come back and make it right. The finish manufacturer’s warranty on the powder coat comes on top of that. Call (888) 426-8078 for the full written warranty with your estimate.
Get a real number on your Wylie iron fence
A free on-site estimate is the fastest way to know what your iron fence will actually cost in Wylie. We measure the line, check the grade and utilities, and hand you a written line-item quote with the 730-Day Done Right Promise on it. Calls are answered by a live person, 24/7, and our technicians are background-checked and arrive in uniform. Call (888) 426-8078 to schedule yours.
Written by the team at Groundwork Construction Co.












