







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What an Iron Fence in Rowlett, TX Actually Involves
A wrought or ornamental iron fence for a typical Rowlett lot runs $3,500 to $9,000, and most jobs take 2 to 4 days from layout to final weld once the fence is fabricated. You’re choosing a permanent metal barrier – posts set in concrete, panels welded or bolted to them, a finish that resists North Texas sun and humidity. The number moves with linear footage, height, picket spacing and finish, and you don’t get a real price until someone measures your fence line. Call (888) 426-8078 for a free on-site estimate.
How We Build an Iron Fence, Step by Step
The sequence below is what a real Rowlett job looks like, not a brochure version of it.
- 1
Day 1 – Walk and flag. We run a string line or mark the property line against your survey, walk the route for buried sprinkler heads, gas meters, cable and shallow utility stubs, and settle post spacing. This is where you confirm fence height, gate locations and whether swing gates face in or out. Call 811 for a utility locate before anyone breaks ground – that wait is built into the schedule, not skipped.
- 2
Days 1 to 2 – Demo and layout. If an old wood or chain link fence comes down, it goes down here. Then we set the line: corners get braced, gates get framed wider than the finished opening, and we mark every post center on your blackland clay. On the tight Rowlett lots between established subdivisions, this step is slower than most homeowners expect – a fence line that runs 18 inches from a neighbor’s fence or 12 inches from a mature oak has to be laid out exactly.
- 3
Days 2 to 3 – Posts in concrete. Every post gets a hole dug to depth and filled with concrete, and the corners and gate posts get oversized footings because they carry the most load. Posts sit plumb and true while the concrete cures. This is the day you’ll see the most machinery and the most mess.
- 4
Day 3 – Panels and gate hang. Finished panels get set, leveled, and attached with welded or bolted connections depending on the style you picked. Gates get hung and adjusted for swing and latch. Pickets line up to the eye, not just the tape measure.
- 5
Day 4 – Finish, punch list and inspection. Touch-up on welds and scratches, hardware check, walk-through with you. If a permit applies, we close it out with the inspection and hand you the documentation. The whole job lands inside the 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Shape Your Iron Fence
Most of the decisions on an iron fence come down to these, and the honest trade-offs matter more than a catalog photo.
- Wrought iron vs. steel vs. aluminum: True wrought iron is heavy, beautiful and forged by hand, and it’s the priciest option on the biggest projects. Steel offers the closest match in strength for less. Aluminum gets you the same look at a lower weight, doesn’t rust, and suits homeowners who want low maintenance over decades. Pick aluminum for ease, steel for security weight.
- Height and picket spec: 4 feet is decorative, 5 feet is a real barrier, 6 feet reads as a privacy statement. Tighter picket spacing and thicker solid pickets add material and add cost, and they add the most at gate frames.
- Finish: Powder-coated finishes hold color well through Rowlett summers. On a lake-adjacent property, choose a finish and drainage detail that handles humidity and spray near the shoreline. A galvanized-then-coated iron fence lives longer than a bare-metal one on any Lot.
- Gates and hardware: Walk gates, drive gates, self-closing springs, latches rated for pools. A drive gate on a long span needs a heavier frame and often a post footing that goes deeper than the fence line. Add a self-closer only where local pool code demands it.
You’re also choosing whether the fence is a standalone barrier or part of a full Fence Installation in Rowlett plan with new gates, a corner return, or a shared line with a neighbor. If the iron work sits alongside patio or deck work, homeowners often pair this with Patios, Walkways & Pool Decks in Rowlett so the whole yard lines up in one schedule.
What an Iron Fence Costs in Rowlett, TX

The lead range is $3,500 to $9,000. What pushes a job to the low end or the high end comes down to variables you can predict once someone measures your property.
| Line item | Typical Range |
|---|---|
| Ornamental iron fence, per linear foot, installed | $45 – $110 |
| Standard walk gate, hung and latched | $350 – $900 |
| Drive gate (wider frame, heavier footing) | $1,200 – $3,500 |
| Old fence removal and haul-off | $200 – $700 |
| Extra post depth on a tight or wooded lot | $50 – $200 per post |
The four or five variables that move the total most:
- Linear footage and layout. A straight back line is cheap per foot. Corners, offsets around mature trees, and returns along the house add labor.
- Site conditions. On small remaining lots squeezed between established subdivisions, excavating to the right post depth around roots, a shallow lot line, or a prior fence footing costs more than a clean open yard.
- Material grade and finish. Steel and wrought-grade panels sit at the top; aluminum sits lower. Powder-coat adds to the price but holds color for years on a north-facing panel.
- Gate count and hardware. Gates carry their own footings and frame time, and pool-safety latches or self-closers add fittings.
- Permits and elevations. Some Rowlett lots – especially lake-facing ones – need more paperwork than a simple interior yard. That’s real time and real cost, and it gets quoted up front.
A written estimate here is upfront – the number you see is the number you pay. It includes layout, demo of an old fence, post footings to depth, panels, gates, hardware, finish touch-up and cleanup. It does not include tree removal, grading, or new landscape work, and those are always quoted separately when a job needs them.
See the difference
Before
After
Before
After
Before
AfterWhat Rowlett Homes Do to an Iron Fence Job
Rowlett’s housing stock tells you a lot about how these jobs go. Most of the subdivisions here – Waterview, the Peninsula, and similar 1980s-through-2000s brick-veneer streets – were built within the last 40 years, and many of those yards are now on their second fence. First-generation fences are often still in the ground; the iron, aluminum or wood barrier installed during the original build is aging out. We see the same failures over and over: rust weeps at post bases, wood posts rot at grade, and gates sag because a footing settled in blackland clay that swelled and shrank through our wet-dry cycles. Storm-driven hail and straight-line wind also do their part, bending gates and popping hardware loose across the spring season.
Where Rowlett is genuinely different from neighboring Garland or Mesquite is that buildable land is nearly gone. Contractors work around tight lot lines, mature trees and shoreline regulations instead of greenfield subdivisions, and lakefront property next to Lake Ray Hubbard pulls in a whole extra layer – Corps of Engineers and floodplain permitting, clay that shifts near the water, and fence lines that need engineering that inland yards don’t. On a lot that runs near the shoreline, the fence line, post depth and finish all have to be planned before the first hole is dug. For projects that reach past the fence line into an outbuilding or living addition, homeowners often pair this with ADU Design & Permitting in Rowlett. Whatever we do, we pull permits and pass inspection on the Fence Installation work, and you’ll see the documentation when we close the job.
Serving Rowlett, TX – Our Local Coverage Area
We serve Rowlett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Rowlett, TX

Most iron fence jobs in Rowlett take 2 to 4 days once the fence is fabricated. Fabrication itself adds a lead time depending on the picket style and finish you pick, and a utility locate can stall the start by a few days. Most jobs are completed on a single continuous schedule once materials land.
It depends on the lot and fence height, and the answer changes on a shoreline property. Fences below the height threshold in a standard lot typically don’t need a permit, while lake-facing lots and taller fence lines often do – and along Lake Ray Hubbard, some fence work faces Corps of Engineers and floodplain review on top of city permitting. We confirm what applies to your property before quoting so the paperwork is part of the plan, not a surprise mid-job.
Most Rowlett iron fence projects land between $3,500 and $9,000, with linear footage, height, material grade and gate count driving the total. A short decorative run on a small lot can come in at the low end, while a long lakefront span with a drive gate runs to the high end. Call (888) 426-8078 for a free on-site estimate – the quote is written and itemized.
Yes. Where the posts and footing are sound, we can replace a run of panels, reset a sagging gate or weld a bent post without tearing out the whole line. Rotten or settling footings are the usual reason a partial fix doesn’t hold, and we tell you plainly when repairs will outlast the fence and when a full replacement makes more financial sense.
Every iron fence we build is covered by the 730-Day Done Right Promise – one of the longest workmanship guarantees in the residential construction space. If a post settles, a weld fails or a gate falls out of line within that window, we make it right. Material warranties through our suppliers sit on top of that.
Get an Iron Fence Estimate in Rowlett
Call (888) 426-8078 to schedule a free on-site estimate for your iron fence in Rowlett. A live person answers around the clock, so you won’t leave a message and wait. On the visit we’ll walk your fence line, check the clay and the lot constraints, and hand you an itemized written quote – plus a look at $1,000 off projects over $10,000 and 0% financing for 18 months if the schedule grows. We cover Rowlett regularly, along with nearby Sachse, Garland, Wylie and Rockwall.
Written by the team at Groundwork Construction Co..












