







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Garland, TX: What It Runs and How Long It Takes
A wrought iron fence in Garland typically costs $3,500 to $9,000 installed, with most residential jobs landing in the middle of that range. A straight run around a standard yard takes three to five working days once the layout and material are set. The number moves with footage, height, finish, and how tight the gate and access details get. Call (888) 426-8078 and we’ll walk the property, measure the actual run, and put the range in writing.
How We Build an Iron Fence, Stage by Stage

Iron work isn’t a one-day drop-in. Here’s the real sequence so you know what each week looks like and where your decisions land.
Stage 1: On-site measure and layout (day 1, 1 – 2 hours)
We walk the property line, confirm where the fence actually belongs relative to the survey, and flag utility locations. On Garland lots this is where clearance problems show up early: narrow side yards, alley-facing rear lines, and shared fences where a neighbor’s post already sits an inch off the line. You approve the run and the gate positions before anyone digs.
Stage 2: Material and spec lock-in (days 1 – 3)
You choose panel style, height, finish, and gate hardware. This is the decision stage: painted steel versus true wrought iron, picket spacing, post caps, and whether you want a self-closing hinge. We confirm the quote against the final selection so nothing changes mid-job. Upfront pricing, no surprises is the rule here.
Stage 3: Demo and prep (day 2 – 3, one to two days)
If an old fence comes out, it comes out now. We pull posts, clear the line, and set the new post locations. In Garland’s clay, post holes get dug deeper than you’d guess and set in concrete so the fence doesn’t shift when the soil swells in spring.
Stage 4: Post setting and panel hang (days 3 – 5)
Posts go in first and cure, then panels and gates hang. Gate swing and latch alignment get dialed in last, because that’s what you’ll notice every single day.
Stage 5: Final walkthrough (day 5)
We torque hardware, touch up any finish nicks, and walk the line with you. Any issue gets fixed before we call it done. The job is backed in writing by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for an Iron Fence
Iron fence is a family of products, not one thing. Here’s what actually differs and who each one suits.
- True wrought iron vs. steel with an iron look. Genuine wrought iron is heavier, holds ornamental detail better, and costs more up front. Painted or powder-coated steel looks nearly identical from the street and is the value pick for most Garland yards.
- Picket spacing and height. Standard 4-foot residential runs read as decorative; 5 to 6 feet with tighter spacing gives real security. Tighter pickets add footage and cost.
- Finish. Powder coat holds color longer in North Texas sun. Field-painted finishes are cheaper and touch up easily but need re-coating sooner.
- Gate hardware. Manual latch, self-closing hinge, or a keyed entry set. Decide this early because it changes the gate build.
- Matching architectural details. Spear tops, scrollwork, and custom finials add cost but tie the fence to the house. On the older brick ranches around Garland’s core, a plain picket run often looks more at home than heavy ornament.
You don’t have to pick blind. We bring samples to the estimate so you’re comparing real finishes, not catalog photos.
What Iron Fence Costs in Garland, TX

For a residential iron fence in Garland, plan on $3,500 to $9,000 installed. A short decorative run sits near the bottom; a full perimeter with a drive gate and custom detail pushes toward the top. Five things move the number:
- Linear footage. The single biggest driver. More footage means more posts, panels, and concrete.
- Height and security level. Taller runs with tight picket spacing cost more per foot than a low decorative line.
- Existing fence removal. Hauling out an old wood or chain link line adds labor and disposal.
- Gates. A simple walk gate is modest. A drive gate with automated hardware is a different line item entirely.
- Terrain and access. Sloped lines, tight side yards, and utility conflicts add time.
Your written estimate lists each of these as a line item, plus material and finish by name. What’s not in it: landscaping repair outside the fence line, and any hardscape changes that turn into a separate scope. Homeowners often pair a new fence with Patios, Walkways & Pool Decks in Garland, and we’ll quote both together if that’s where you’re headed.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland is a post-war streetcar suburb that grew into a full city, and the building stock splits hard by era. The older core around 75040, 75041, and 75042, near downtown and the original 1950s-60s subdivisions, is full of small-footprint brick ranches with narrow side yards and alley-facing rear lines. That tightness changes iron fence work: posts land close to a neighbor’s line, gates have to swing into a tight alley run, and clearance matters more than on a wide suburban lot. Out toward the newer additions, lots are wider and runs are longer. Either way, the city runs its own permitting and inspections rather than deferring to Dallas County, so a fence along a property line needs a clean layout before anyone digs. And the Blackland Prairie clay underneath moves a lot between wet spring and dry summer, which is why we set posts deep in concrete and brace gate posts harder than a mild-climate crew would.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Iron Fence in Garland

Most residential iron fence jobs in Garland run three to five working days, with the bulk of that on post setting and curing. Cold, rain, or a large gate can push it a day. Call (888) 426-8078 for a timeline on your exact run.
It depends on the height and whether it fronts a corner or an alley, because Garland runs its own inspections rather than deferring to the county. We confirm what applies to your lot before the job starts. Call (888) 426-8078 and we’ll walk you through it.
Usually, yes. Iron fence jobs don’t move plumbing or structure, so the disruption stays shallow and local. On tight Garland lots, the bigger question is post placement clearance, not major site work.
Plan on $3,500 to $9,000 installed for a typical residential run. A basic decorative line sits near the low end; a full perimeter with a drive gate and custom detail sits near the top. Call (888) 426-8078 for an exact quote, and estimates are free.
Yes. Every iron fence we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Calls are answered by a live person, 24/7, so you’re never stuck waiting on a voicemail.
Get a Free Iron Fence Estimate in Garland
If you’re weighing an iron fence for your Garland property, the easiest next step is a free on-site estimate. We measure the run, talk through finish and gate options, and hand you a written line-item price with the number locked. Call (888) 426-8078 to schedule. If the fence is part of a wider project, our Fence Installation service and the full Fence Installation in Garland scope cover the rest, and we serve the surrounding area through Garland. Adding a structure at the same time? Homeowners often pair this with ADU Design & Permitting in Garland.
Written by the team at Groundwork Construction Co.












