







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Garland, TX: What the Job Costs and How Long It Takes
Installing patios, walkways and pool decks in Garland, TX usually runs $3,500 to $11,000 for a paver patio, with walkways and pool surrounds priced by the square foot on the same visit. Most residential jobs take 3 to 7 working days from demo to final poly sand, weather permitting. Call (888) 426-8078 and we’ll walk your yard, check access and grade, and put a written line-item number in your hands.
How the work actually runs, from demo day to the last swept joint

Patios, walkways and pool decks fail or hold up based on what happens before a single paver goes down. Here’s the real sequence we follow in Garland, with the decisions you’ll make at each step.
Stage 1: Site walk and layout (day 1). We measure the footprint, check slope away from the slab, and locate the downspouts, hose bibs, gas stub and any buried irrigation. You decide the layout and where the walkway ties into the driveway or back door. On Garland’s clay, drainage direction matters more than most homeowners expect, so we map where water needs to go before we dig.
Stage 2: Demo and excavation (days 1-2). Existing concrete, old pavers or sod comes out, and we excavate 6 to 10 inches depending on the base spec. This is the stage where hidden problems surface: a cracked original patio slab, a root system, or a low spot that’s been pooling. You decide whether to correct grading now or work around it. Skipping it costs less today and more later.
Stage 3: Base and compaction (days 2-3). We lay crushed stone base in lifts and compact each one. This is the step cheap bids cut, and it’s the reason patios heave after two North Texas summers. Base depth is where your money either buys a patio that lasts or one that rocks underfoot.
Stage 4: Setting the surface (days 3-5). Pavers go down on a screeded bedding layer, cut tight at borders and steps. Concrete is formed, poured and finished if that’s the choice. Pool decks get the coping and edge detail. You approve the pattern and any accent band before this stage starts.
Stage 5: Joints, cleanup and walkthrough (days 5-7). Polymeric sand goes into the joints, we sweep, water-cure or seal if specified, and do a final walkthrough with you. Anything that needs a fix gets flagged in writing, not left for you to discover in a month.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll make: surface, base and edge
The surface decision drives most of the cost and all of the feel underfoot. Here’s how the real options stack up.
- Concrete pavers (Belgard and similar lines): $3,500 to $11,000 installed for a typical patio. They flex with Garland’s clay movement instead of cracking, and a single damaged unit can be lifted and reset. Higher upfront cost than poured concrete.
- Stamped or broom-finished concrete: The lower-cost path for walkways and simple patios. Fewer joints to maintain, but it cracks and can’t be spot-repaired the way pavers can. Best for straight walkways with light traffic.
- Travertine or natural stone pool decks: Cooler underfoot in July and August, which matters on a pool surround. Premium price, more maintenance, and it needs a solid base to stay put.
- Base spec: 4 inches of compacted stone for walkways, 6 to 8 inches for patios and anything a vehicle crosses. This is the line item to ask about on every bid.
- Edge restraint and drainage: Concrete curb edging keeps the field from spreading; a channel drain or French drain moves water off the low corner. Cheap bids skip both.
What Patios, Walkways & Pool Decks costs in Garland, TX

Plan on $3,500 to $11,000 for a paver patio, with pool decks and long walkway runs pricing out by square footage on top of that. A written estimate should break out demo, base, surface material, edge restraint, drainage and cleanup as separate lines, so you can see exactly where the money goes. The number you approve is the number you pay – upfront pricing, no surprises.
Five things push a job toward the low or high end of that range:
- Square footage and shape: a straight 200-square-foot walkway sits at the low end; a curved 500-square-foot patio with an accent band sits at the high end.
- Existing condition: tearing out an old slab adds demo and haul-off. Removing a healthy lawn is cheaper.
- Relocating utilities: moving a hose bib, gas stub or sprinkler zone adds cost and coordination.
- Material grade: standard concrete pavers versus natural stone or travertine is a real spread.
- Drainage scope: a simple slope-away is included; a full French drain or channel drain is an add.
What’s typically not in a base number: major regrading, retaining walls over 18 inches, and structural work around a pool shell. We flag those before you sign, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Garland homes specifically do to this job
Garland is a post-war streetcar suburb grown into a full city, and its building stock splits along a clear line of construction era. Near downtown and the original 1950s-60s subdivisions in 75040, 75041 and 75042, we’re usually working behind small brick ranches with tight side yards and mature trees. Out toward the newer master-planned additions in 75043 and 75044, we’re setting patios against two-story brick-and-frame homes with different grade and drainage. Knowing which decade of construction we’re walking into changes the bid before we ever quote.
The bigger factor is soil. Garland sits on North Texas Blackland Prairie clay that swells in wet springs and shrinks through hot dry summers, and that movement drives everything under a patio or pool deck. A base built to the wrong depth will heave and rock within a couple of seasons. We spec deeper compacted base on Garland clay and grade every surface to shed water away from the slab, because a patio that holds water is a patio that fails. Pool decks get extra attention at the coping line, where movement and splash-out combine.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Patios, Walkways & Pool Decks in Garland

Most patios and walkways take 3 to 7 working days from demo to final sand, and pool decks run a day or two longer because of coping detail. Rain during the base stage can add days, since we won’t set pavers on a saturated subgrade. Call (888) 426-8078 for a schedule that fits your project.
A ground-level patio or walkway typically doesn’t require a permit, but a raised deck, retaining wall, or any structure tied to a pool usually does, and Garland runs its own inspections rather than deferring to the county. We tell you up front which parts of your job need permits and handle the pull. Call (888) 426-8078 to talk through your specific scope.
Yes, in most cases. We lay out patios and walkways to work around hose bibs, gas stubs and the existing slab, and only recommend relocation when grading or drainage demands it. If your project grows into a larger site plan, owners often pair this with ADU Site Prep & Utilities in Garland. Call (888) 426-8078 for an on-site look.
Paver patio installation in Garland runs $3,500 to $11,000, with the spread driven by square footage, base depth, material grade and drainage scope. Natural stone and travertine pool decks price above that. Call (888) 426-8078 for an exact written quote – estimates are free.
Every patio, walkway and pool deck we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call (888) 426-8078 with questions about coverage.
Get a free estimate on your Garland patio, walkway or pool deck
Call (888) 426-8078 and a live person answers, day or night. We’ll set a time to walk your yard, check grade and access, and hand you a written line-item estimate for patios, walkways and pool decks in Garland – free, no pressure. If the project expands, we can fold it into a full Driveway & Pavers in Garland plan, and our Driveway & Pavers service covers the wider hardscape. Owners often pair this with Full Kitchen Remodeling in Garland when they’re improving the whole property.
Written by the team at Groundwork Construction Co.












