







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Specialty Roofing in Garland, TX actually involves
Specialty roofing in Garland covers the work that sits outside a standard asphalt shingle replacement: low-slope and flat sections over additions and garages, metal accents and porch roofs, tile and slate profiles, and the flashing details that decide whether a roof survives a hailstorm. Most of these jobs run two to four days on a typical Garland ranch or two-story, and pricing lands between $8,000 and $20,000 for a full replacement with specialty detailing, or $400 to $1,800 for a targeted repair. Call (888) 426-8078 and we’ll walk your roof and put real numbers in writing, free.
How we run a specialty roofing job, stage by stage

Specialty work rewards sequence. Skip a step and you’ll be chasing a leak for years, so here’s exactly what happens and when you’ll be asked to decide something.
Stage 1: Inspection and scope (day 1, about 90 minutes)
We walk the roof, photograph the decking, measure the roof planes, and check the attic side of the sheathing for old water staining. You get a written, line-item scope before anyone touches a shingle. This is where we identify whether your low-slope section needs a membrane system or a modified bitumen build-up, and whether the existing flashing is salvageable.
Stage 2: Permits and material order (days 1 – 5)
Garland runs its own permitting and inspection process, so we pull the roof permit and schedule the inspection up front rather than after the fact. You’ll choose your profile and color during this window. Expect a few business days for permit issuance and material delivery to the jobsite.
Stage 3: Tear-off and decking inspection (day 1 of install, 4 – 8 hours)
We remove the old roofing down to the deck, then inspect and replace any soft or delaminated sheathing. On older Garland homes this is the moment that changes the bid: a roof that looked simple from the curb often hides water-damaged decking around chimneys and valleys. We document anything we find with photos before we proceed.
Stage 4: Underlayment, flashing, and field installation (days 1 – 3)
Ice-and-water shield goes in the valleys and along the eaves, synthetic underlayment covers the field, then the specialty system goes down. Flashing at chimneys, skylights, and wall intersections gets fabricated to fit, not reused. Most single-family Garland roofs close out in one to three install days depending on pitch and complexity.
Stage 5: Inspection, cleanup, and final walk (day 3 – 4)
We run a magnet sweep for nails, haul off debris, and meet the city inspector. Then we walk the roof with you and hand over the warranty paperwork. Our work is backed by the 730-Day Done Right Promise: if it isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The specialty roofing options you’ll choose between
Every specialty job comes down to a handful of real decisions. Here’s the honest trade-off on each.
- Architectural asphalt shingles (GAF, CertainTeed): the value play at $8,000 – $14,000 installed for a typical Garland home. Good wind ratings, wide color selection, and easy to repair later. Best for homeowners who want durability without a premium profile.
- Standing seam metal accents and porch roofs: $15,000 – $40,000 for a full metal installation. Excellent hail and wind performance and a 40-year-plus service life, but the upfront number is real and the profile is a design commitment. We often quote metal on porch roofs and accent sections only, which keeps cost down.
- Tile and slate profiles: heavy, distinctive, and expensive to repair if a piece cracks. Suits homes where curb appeal is the point and the structure can carry the load.
- Low-slope membrane systems (TPO, modified bitumen): the right answer for flat sections over additions and garages. Not glamorous, but it’s what keeps a flat roof from pooling water.
- Impact-resistant shingles: worth asking about in Garland, where hail is routine. Costs roughly 10 – 20% more than standard architectural shingles and can lower insurance premiums.
When the roof work is part of a full Roofing in Garland scope that includes gutters or a re-deck, we quote it together so you’re not paying mobilization twice. And if you’re already planning exterior work, homeowners often pair this with Energy-Efficient Windows in Garland to handle the envelope in one pass.
What Specialty Roofing costs in Garland, TX

Specialty roofing in Garland runs $8,000 to $20,000 for a full replacement with specialty detailing, and $400 to $1,800 for a targeted repair on flashing, a valley, or a low-slope section. Metal roofs push toward $15,000 to $40,000, and tile repairs sit around $600 to $2,500. Those ranges aren’t guesses; they’re what the Garland market actually pays.
Four things move the number:
- Roof size and pitch: a steep two-story roof takes longer, requires more safety setup, and costs more per square than a single-story ranch.
- Decking condition: replacing rotten sheathing adds material and labor. On older Garland homes, this is the most common surprise line item.
- Specialty profile: metal and tile carry higher material costs and more installation time than architectural shingles.
- Flashing and penetrations: chimneys, skylights, and complex valleys require fabricated flashing, which adds skilled labor.
- Permit scope: a full replacement permit and city inspection is a real cost; a small flashing repair usually isn’t.
Every written estimate lists what’s covered (tear-off, decking replacement allowance, underlayment, flashing, cleanup) and what isn’t (structural repairs, rotten fascia). Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Garland homes specifically do to this job
Garland is a post-war streetcar suburb that grew into a full city, and the building stock splits sharply by era. The older core around the original 1950s-60s subdivisions in ZIP codes 75040, 75041, and 75042 has small brick ranches with original roof decks and tight clearances. Out toward the newer master-planned additions, you’ll find two-story brick-and-frame homes with more complex rooflines and steeper pitches. Knowing which decade of code and framing we’re walking into before we bid changes the estimate, and it’s why we inspect the attic, not just the shingles.
North Texas Blackland Prairie clay and the region’s hail and high-wind events shape roof decisions here. Hail is routine in Garland, so impact-resistant materials and properly nailed decking matter more than the shingle color. If your roof ties into a broader project, our Roofing service covers the full scope, and we work with fabricated and prefabricated building systems from makers like Plant Prefab and Boxabl when a specialty roof sits over an addition or ADU. We serve homeowners across Garland, and if your project touches a patio opening, homeowners often pair this with Sliding & Patio Doors in Garland.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Specialty Roofing in Garland

Most specialty roofing jobs take two to four days from tear-off to final inspection. A straightforward single-story replacement with standard detailing can close in two days; metal or tile profiles with complex flashing can stretch to four. Call (888) 426-8078 for a walkthrough and a timeline specific to your roof.
Yes, Garland requires a permit for full roof replacements and inspections on the work. We pull the permit for you and schedule the inspection as part of the job, so you’re not the one chasing paperwork. A small repair often doesn’t need one.
In most cases, yes. Specialty roofing is exterior work, and plumbing and structure stay untouched unless we find water damage that extends into the framing. If that happens, we document it with photos and quote the extra work before proceeding.
A targeted specialty repair in Garland runs $400 to $1,800, with tile repairs at $600 to $2,500. The number depends on the profile and whether the leak traces to flashing or the field. Call (888) 426-8078 for a free estimate; we’ll tell you whether a repair or replacement makes more sense.
Every specialty roofing job is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. Manufacturer material warranties apply on top of that, and we hand over all warranty paperwork at the final walkthrough.
Get a free specialty roofing estimate in Garland
We’ll walk your roof, photograph what we find, and hand you a written line-item estimate with real Garland numbers, at no cost. No voicemail, no waiting until Monday: a live person answers 24/7 at (888) 426-8078. You’ll know the scope, the timeline, and the price before you commit to anything.
Written by the team at Groundwork Construction Co.












