







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Garland, TX: What the Job Actually Involves
Paver driveway installation in Garland typically runs $7,000 – $18,000 and takes five to eight working days from demo to the first car parked back on it. The work is excavation, a compacted crushed-stone base, edge restraint, then set-and-sand the pavers over the base. Most Garland jobs land in the middle of that range because the older driveways here are narrow and the clay underneath needs correcting before anything goes down. Call (888) 426-8078 to schedule a free on-site estimate with a line-item written quote.
How We Build a Paver Driveway, Stage by Stage

The order matters more than the pavers. A paver driveway is a base job with pavers sitting on top, and in Garland’s soil the base is where the money and the time go.
Stage 1: Measure, Layout, and Demo (Day 1)
We set the finished elevation against your garage slab and the city sidewalk so water runs away from the door, not toward it. Then the old surface comes out, whether that’s cracked concrete, worn asphalt, or gravel. A standard two-car apron takes a crew most of a day. You’ll confirm the driveway width and where the expansion joints sit before we cut anything.
Stage 2: Excavation and Base Prep (Days 2 – 3)
We dig down deep enough for a 6-inch to 8-inch compacted base. On Garland’s Blackland Prairie clay, that means cutting out the expansive material and bringing in select fill that won’t heave when the wet spring turns into a dry summer. The base goes in lifts of 2 to 3 inches, each one watered and plate-compacted before the next. This is the stage that keeps pavers from settling unevenly three summers from now. You don’t have to decide anything here, but this is the day to ask how we’re handling drainage at the street.
Stage 3: Edge Restraint and Drainage (Day 3)
Concrete or steel edging goes down along both sides to keep the field locked. If your driveway pitches toward the garage, we’ll talk through a channel drain or a slot drain at the apron. On the flat lots in the older parts of Garland, that drainage detail is often the difference between a dry garage and a wet one after a hard storm.
Stage 4: Setting the Pavers (Days 4 – 6)
We screed a bed of bedding sand, lay the field in the pattern you chose, and cut the edge pieces to fit. A typical 400 to 600 square foot Garland driveway takes two to three days to lay. You’ll pick the paver color, thickness, and pattern before this stage starts, not during it.
Stage 5: Sand, Compact, and Clean Up (Days 7 – 8)
Polymeric sand sweeps into the joints, the whole field gets a final plate compaction, and we wash it down and haul off the spoil. You can park on it once the sand has set, usually the next day. We walk the finished job with you against the written scope before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Actually Choose Between
Most of the decision comes down to three things: what the paver is made of, how thick it is, and what pattern you lay it in. Here’s the honest trade-off on each.
- Concrete pavers (interlocking). The standard choice for a Garland driveway. Dense, molded, and available in a wide color range. They handle the clay movement better than poured concrete because the joints flex instead of cracking. Expect the middle of the price range and a lifespan measured in decades with occasional re-sanding.
- Clay brick pavers. Warmer look, heavier per square foot, and the color doesn’t fade because it runs through the body of the brick. Higher material cost and a slower install. A good fit for the mid-century ranches near the old downtown core where the house already has brick detailing to match.
- Permeable pavers. Open-graded joints let water drain through the base instead of running to the street. Worth the premium if your lot holds water or you’re dealing with a tight drainage situation. Needs a properly designed base to work, so it’s not a drop-in upgrade.
- Paver thickness (60mm vs 80mm). 60mm is fine for a residential driveway with cars. 80mm is what you want if a heavy truck or RV parks on it regularly. The upcharge is real but small next to replacing a settled field.
- Pattern and color. Running bond, herringbone, and basketweave are the common layouts. Herringbone locks tighter and resists shifting best; running bond is the fastest to lay and the cheapest. Color and border bands are aesthetic, but a contrasting border also reads as a clean edge line as the field settles.
We only install pavers from brands whose tolerances and color consistency hold up, and Belgard is one we specify most often. Our technician crews bring up to 12 years of experience to the layout and compaction work that determines how the driveway ages.
What Paver Driveways Cost in Garland, TX

A paver driveway in Garland runs $7,000 – $18,000 for a standard residential installation, and the written estimate breaks that into demo, base, pavers, edge, and drainage line by line so you can see where the money goes. No-hassle upfront pricing means the number on the quote is the number you pay.
Five things push a Garland job toward the low or high end:
- Square footage. A one-car apron of roughly 250 square feet sits near the bottom; a long two-car drive with a turnaround runs to the top and beyond.
- What’s underneath. A stable existing base is cheap to work over. Expansive clay that has to be over-excavated and replaced with select fill adds cost.
- Drainage work. A channel drain, a regrade, or connecting to a yard drain pushes the number up; a driveway that already drains clean doesn’t.
- Paver grade and thickness. Standard 60mm concrete pavers are the baseline; clay brick, permeable systems, or 80mm all add.
- Access and haul-off. Tight lots where the crew can’t get a machine to the apron, or a long haul for the old concrete, add labor.
What’s included in our quote: demo, haul-off, base excavation and compaction, edge restraint, the pavers, polymeric sand, and cleanup. What’s typically not: relocating a sprinkler main or a gas line that runs under the apron, which we flag before work starts, and any HOA architectural review fee. Everything we install is covered by the 730-Day Done Right Promise, and 0% financing for 18 months plus $1,000 off projects over $10,000 can spread a larger job out without the sting.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland splits sharply along a line of build era, and that line decides what a paver driveway job looks like before we ever lay a paver. The older core around the original downtown and the post-war subdivisions in ZIP codes 75040, 75041, and 75042 is mostly 1950s and 60s single-story brick ranches. Those driveways are narrow, the aprons are short, and the lots are flat enough that water has nowhere to go but the garage. Out toward the newer ZIPs, the driveways are wider and the base conditions are more predictable. The other thing Garland does differently than a lot of North Texas: the city runs its own permitting and inspections rather than handing it to the county, so a right-of-way or approach change at the street gets reviewed locally. And the Blackland Prairie clay under all of it swells in a wet spring and shrinks hard in a dry summer, which is the single reason a proper base matters more here than the paver brand. We cover Garland and the surrounding towns, and this is part of a full Driveway & Pavers in Garland scope when the job grows to include a walkway or a patio edge.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Garland

Plan on five to eight working days from demo to parking. The base prep eats two to three of those days because of the clay, and laying the pavers takes two to three more. Weather can add a day if rain hits during excavation. Call (888) 426-8078 for a schedule that fits your job.
Usually not for a like-for-like replacement on your own property, but you do if the project touches the city right-of-way, changes the curb cut, or alters drainage at the street. Garland inspects those locally, and we handle the permit and the inspection as part of the job. Call us and we’ll tell you which side of that line your driveway sits on.
Yes. We work off the existing apron and keep the excavation inside the driveway footprint unless drainage work requires more. A sprinkler line or gas line crossing under the drive is the one thing that changes the plan, and we locate those before demo. Call (888) 426-8078 and we’ll walk the site with you.
Most Garland jobs land between $7,000 and $18,000, driven by square footage, base condition, drainage, and paver grade. We give you a written line-item quote with free estimates so you see every number before you commit. Call (888) 426-8078 to schedule yours.
Your installation is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, well past the point where most contractors are done taking your calls. The pavers themselves also carry the manufacturer’s warranty. Call for the written terms before you sign anything.
Free Paver Driveway Estimate in Garland
Call (888) 426-8078 to schedule a free on-site estimate for paver driveways in Garland. We’ll measure the drive, check the base and drainage, and hand you a written line-item quote with the same numbers we’ll stand behind through completion. A live person answers every call, 24 hours a day. Our driveway & pavers service covers Garland and nearby towns like Sachse, Rowlett, Wylie, and Sunnyvale, and homeowners often pair this work with a Garage Conversion ADU in Garland or an ADU Design & Permitting in Garland project when they’re adding living space at the same time. Browse the full Driveway & Pavers range or see our Garland service area. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Mesquite.












