







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ADU Site Prep & Utilities in Royse City, TX: What the Ground Work Actually Costs
ADU Site Prep & Utilities in Royse City runs $45,000 to $130,000 depending on how much trenching, slab work and service upgrades your lot needs before a single wall goes up. Most lots off I-30 and FM 548 need the water, sewer and electrical brought in from a fresh tap, and the grading done right the first time because the clay underneath won’t forgive shortcuts. The full build sits well above that number once the structure goes on top. Call (888) 426-8078 and we’ll walk your lot and give you a written estimate.
Day One to Final Inspection: How Site Prep and Utilities Come Together

Site work is unglamorous and it decides everything that follows. Here’s the order we run it, and where you’ll be making calls.
Stage 1: Lot assessment and utility locate (1 – 2 days)
We stake the pad, pull the plat, and call in 811 so every buried line gets flagged before a bucket touches dirt. You decide the building footprint and whether the ADU sits off the alley or off the main driveway. Getting this wrong is the most expensive mistake on the job.
Stage 2: Clearing, grading and drainage (3 – 5 days)
Topsoil comes off, the pad gets cut and compacted in lifts, and we set the swales and downspout routing so water moves away from both the ADU and the house. On Royse City clay this stage isn’t optional polish; it’s the difference between a level slab in year ten and a cracked one in year three.
Stage 3: Trenching for wet and dry utilities (2 – 4 days)
Water, sewer and electrical conduit all get trenched to code depth, with the sewer run on proper fall. If your main panel is already loaded, you’ll decide here between a subpanel and a separate meter. This is also where we confirm tap fees with the city.
Stage 4: Forms, rebar and slab pour (3 – 5 days plus cure)
We set forms, tie rebar, and pour with the vapor barrier and anchor bolts placed for the chosen structure. You approve the slab elevation against the finished grade, which matters for drainage and for how the ADU meets the yard.
Stage 5: Inspections and utility tie-ins (1 – 2 weeks)
Rough inspections run, then the meter sets and the final connections happen. You’ll get the inspection record and the as-built utility drawing, which you’ll want for the future.
If the ADU is part of a full Home Additions & ADU in Royse City project, the site package folds into the larger schedule.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make on Site Prep and Utilities
- Slab-on-grade vs. pier and beam: Slab is cheaper and standard here; pier and beam costs more but tolerates the clay movement better on the acreage lots outside town.
- Utility source: City water and sewer where the tap is close; a septic system and well where the lot is rural. Septic alone can add five figures and its own permitting timeline.
- Panel capacity: A subpanel off the main service is cheapest; a separate meter means the ADU pays its own bill and is the better call for a long-term rental.
- Prefab vs. site-built structure: Companies like Dvele and Plant Prefab ship a panelized shell that drops onto a prepared slab fast, and the trade-off is a longer lead time to order but a much shorter time on site. Site-built gives you more design freedom.
- Drainage detailing: French drains, gutter extensions, and grading swales. Skipping them saves a little now and costs a lot in foundation repairs later.
What ADU Site Prep & Utilities Costs in Royse City, TX

Figure $45,000 to $130,000 for the site and utility package, with the full ADU build commonly landing between $90,000 and $220,000. The spread is wide because the dirt and the distance to services vary so much lot to lot.
| Line item | Typical range |
|---|---|
| Clearing, grading, drainage | $6,000 – $18,000 |
| Water and sewer trenching and tap | $8,000 – $28,000 |
| Electrical service and trench | $5,000 – $20,000 |
| Slab, forms and rebar | $18,000 – $45,000 |
| Permits, inspections, engineering | $4,000 – $15,000 |
What pushes a job to the high end: a long utility run to the street, a septic system instead of a city tap, a separate meter, poor soil bearing that needs over-excavation, and clay that demands more drainage work than the plan assumed. A written estimate spells out which trades are included, how many inspections are covered, and whether the tap fee is passed through or built in. Ask about upfront pricing so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Royse City Lots Specifically Do to Site Prep and Utilities
Royse City isn’t a remodel town, it’s a build town. The subdivisions filling in along I-30 and FM 548 are mostly 15 to 20 years old or newer, with scattered 1970s – 90s ranch homes and acreage properties on the outskirts, so crews here spend their days on new construction rather than patching old houses. The clay is the story. Blackland Prairie soil swells and shrinks with the wet-dry swing, and crews fighting it see slabs crack and driveways shift within a few years when the grading and drainage weren’t detailed carefully. That’s the recurring callback item on these jobs. Permitting and inspection schedules run through the city and county, and turnaround can stretch in peak building season, so we build slack into the timeline rather than promise dates we can’t hold. If you’re adding an ADU in the 75189 ZIP, plan for soil bearing to drive decisions about slab thickness and reinforcement more than it would on sandier ground.
Serving Royse City, TX – Our Local Coverage Area
We serve Royse City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: ADU Site Prep & Utilities in Royse City

Most packages run 3 to 6 weeks from grading to final utility tie-in, with inspection scheduling being the biggest variable. Call (888) 426-8078 for a timeline tied to your lot.
Yes. We handle the permit application, the engineering and the inspections, and we walk you through what the city requires for an ADU on your property. On a lot with a septic system, the county health department gets involved too, and we coordinate that.
Often yes. If the tap and panel have capacity, we can tie in without disturbing the main house. When capacity is short, a subpanel or separate meter is the usual fix, and we’ll price both so you can choose.
Budget $45,000 to $130,000 for site and utilities, with the full ADU build at $90,000 to $220,000. Call (888) 426-8078 for an exact quote; estimates are free.
All of it sits behind our 730-Day Done Right Promise, and every technician on the job is background-checked and arrives in uniform. If something’s not right, we make it right.
Get a Free On-Site Estimate for ADU Site Prep & Utilities in Royse City
We’ll walk your lot, check the tap locations and soil, and hand you a written, line-item estimate for ADU Site Prep & Utilities in Royse City. Calls are answered by a live person, so you’ll talk to someone who can answer the real questions. Call (888) 426-8078 to schedule your free estimate. We cover Royse City and the surrounding area, and homeowners often pair the site work with Small & Partial Kitchen Remodels in Royse City or a Full Bathroom Remodeling in Royse City once the ADU is framed. Our Home Additions & ADU service covers the whole scope from site to finish.
Written by the team at Groundwork Construction Co.












