







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Melissa, TX: What It Costs and How Long It Takes
A wrought iron fence in Melissa, TX typically runs $3,500 to $9,000 for a standard residential lot, and most jobs finish in three to six working days from layout to final coat. The wide spread comes down to linear footage, height, and whether you want a simple three-rail perimeter or a decorative design with forged pickets. For an exact number on your property, call (888) 426-8078 and we’ll walk your lot line and quote it in writing, free.
Builder-Grade Shortcuts and the Iron Fence Project That Fixes Them

North Texas subdivisions go up fast, and perimeter fencing is one of the first places builders economize. In the newer master-planned communities around Melissa, we routinely see hollow steel tube, thin-gauge panels, and posts set too shallow for blackland prairie clay. The result is a fence that leans on one side and sags at the gate within a season of installation. An iron fence done right is the opposite approach: real weight, deep footings, and a finish that survives the summer sun. Here’s how the sequence actually works.
Stage 1: Walk and Layout (Day 1)
We meet you on-site, pull a string line along the property boundary, and mark every post location with paint or stakes. This is where you decide height (4-foot, 5-foot, or 6-foot), picket spacing, and the number of gates. Expect 60 to 90 minutes. If your lot backs to a drainage easement or greenbelt, we flag that stretch separately because easement rules in Melissa often dictate setback from the utility corridor.
Stage 2: Utility Locate and Demolition (Days 1 – 2)
Before any digging, we call 811 for utility marking – irrigation lines, gas, electric, and fiber run through these newer lots in unexpected places. Once that’s clear, we remove any existing wood or wire fence and haul it off. Typical demo for a standard 150-foot run takes three to five hours. You don’t need to move anything; the crew handles tear-out and debris removal as part of the job.
Stage 3: Post Setting and Footings (Days 2 – 3)
Posts go in at 6 to 8 feet on center, each hole dug to roughly 24 to 30 inches and set in concrete. This is the stage that makes or breaks an iron fence in North Texas clay. The blackland prairie soil here swells when wet and shrinks when dry, so a shallow post pulls loose within a year. We pour footings deep enough to hold through the wet-dry cycle, and we let the concrete cure 24 to 48 hours before setting panels. That cure window is non-negotiable – rushing it is how fences lean.
Stage 4: Panel and Gate Installation (Days 3 – 5)
Rails and pickets are attached to the set posts, gates are hung and adjusted for swing, and hardware goes on. A standard gate takes about two hours to hang and tune. If you want an automated gate, that decision happens here and adds roughly one day. This is also when you decide whether to add decorative finials or scrollwork sections.
Stage 5: Finish, Touch-Up, and Walkthrough (Day 5 – 6)
We inspect every weld and touch up any scratches from installation, then walk the full run with you. Powder-coated finishes are standard and hold up to UV far better than cheap paint. At the walkthrough you check gate alignment, confirm the property line, and review the 730-Day Done Right Promise – if anything isn’t right, we come back and fix it. Most Melissa jobs wrap in five or six working days total, weather permitting.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Iron Fence Options You’ll Choose Between
Iron fencing isn’t one product. The choices below are the ones that actually move your price and lifespan, and it’s worth settling them before signing anything.
- Wrought iron vs. steel: Traditional wrought iron is heavy, forged, and the most durable – and the most expensive. Steel panels are lighter, cost less, and perform well when the finish is good. For most Melissa residential lots, steel with a quality powder coat is the sensible middle ground.
- Height: 4-foot reads as decorative and works along a front yard; 5-foot is the common property-line choice; 6-foot gives privacy and security. Each jump adds material and post length, which is a real cost line.
- Picket style: Simple straight pickets are the budget-friendly standard. Spear-top, decorative scrollwork, and custom designs add cost and lead time, and they’re worth it only where the fence faces the street.
- Finish: Powder coating is the default and the right call in Texas sun – it resists chipping and UV fade. Painted finishes cost a little less up front and need recoating far sooner.
- Gate count and automation: Each gate adds hardware and time. An automated driveway gate adds a full day of work and requires a power run to the post – worth planning early.
Where a client wants a mix of iron and another material, we often fold the iron in as part of a full Fence Installation in Melissa project so the materials and heights line up across the whole perimeter.
What Iron Fence Costs in Melissa, TX

Residential iron fence projects in Melissa run $3,500 to $9,000 for a typical lot. That range assumes a perimeter around a standard suburban yard, not a sprawling acreage with multiple gates. Here’s what pushes a job toward the low or high end:
- Linear footage: The biggest driver. A smaller, newer subdivision lot (like those filling in around 75454) sits at the low end; larger parcels push toward the top.
- Height and style: A 4-foot standard-picket run costs less than a 6-foot decorative design with forged accents.
- Soil and footing conditions: Deep footings through blackland prairie clay add concrete and labor. A site with existing foundation movement or drainage issues can require extra stabilization.
- Existing fence removal: Tear-out and haul-off of an old fence adds a line item. If there’s nothing to remove, you save that cost.
- Gates and automation: Added gates and a powered driveway gate are separate cost lines and land at the high end of the range.
Every written estimate breaks out material, footage, gates, footings, and removal so you can see exactly where your money goes. Upfront pricing, no surprises – the number you see is the number you pay. What’s included: layout, utility coordination, demo, footings, panels, gates, and finish touch-up. What’s typically not: landscape repair around post holes and any city permit fees, which we’ll tell you up front if your project needs one. For the wider picture of all fence types, see our Fence Installation service page.
See the difference
Before
After
Before
After
Before
AfterWhat Melissa Homes Specifically Do to This Iron Fence Job
Melissa is a fast-growing North Texas city where new residential subdivisions are replacing former farmland, and that shapes an iron fence job in ways you won’t hit in an older town. Most of the housing stock here is newly built single-family homes in master-planned communities, many completed within the last decade or still under construction. That means we’re usually working on clean, bare lots rather than tearing out decades-old fencing. But it also means we’re coordinating with new utility installations – plumbed irrigation, fiber, and gas lines run through fresh lots at depths that surprise people setting posts. We always call 811 first, and we plan footings around whatever’s buried.
The distinctive challenge is the blackland prairie clay under these subdivisions. This soil swells dramatically when wet and shrinks when dry, and a poorly stabilized lot develops post-construction foundation issues that a shallow fence footing won’t survive. We set posts deep and let concrete cure fully, because that’s the only way an iron fence stays plumb through a Texas wet season. If you’re in one of the growing communities off the main corridors through Melissa, paying attention to footing depth is the difference between a fence that lasts and one that leans by spring. Homeowners on larger acreage parcels often pair a perimeter iron run with Patios, Walkways & Pool Decks in Melissa to tie the outdoor hardscape together, and if you’re planning a structure on the lot, our ADU Design & Permitting in Melissa work covers the planning side. We serve the whole Melissa area.
Serving Melissa, TX – Our Local Coverage Area
We serve Melissa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Iron Fence in Melissa

Most residential iron fence jobs in Melissa take three to six working days, with about 24 to 48 hours of that being concrete cure time before panels go up. We give you a day-by-day schedule in the estimate so you know when crews are on-site. Call (888) 426-8078 for a timeline on your specific lot.
Permit requirements depend on the fence height, location, and whether you’re near an easement, and rules in Melissa evolve as the city grows. We check the current municipal code for your address and tell you up front whether a permit is needed. If it is, we walk you through the process before work starts. Call (888) 426-8078 and we’ll confirm what applies to your lot.
Yes. An iron fence is perimeter work, so in most cases there’s no plumbing, electrical, or structural relocation involved. The one exception is a powered driveway gate, which needs an electrical run to the gate post. We plan that early. For a standard run, nothing inside the house moves.
Iron fence in Melissa runs $3,500 to $9,000 for a typical residential lot, depending on linear footage, height, style, footings, and gates. You’ll get a written line-item estimate so every cost is clear. Call (888) 426-8078 for an exact quote – estimates are free.
Our iron fence work is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on posts, panels, and gates for two full years. Calls are answered by a live person 24/7, so if something needs a look, you reach a real person, not a voicemail.
Get Your Free Iron Fence Estimate in Melissa
A proper iron fence on a Melissa lot comes down to the details: deep footings through that blackland clay, real material weight, and a finish that holds up to Texas sun. We’ll walk your property line, measure the run, talk through height and style, and hand you a written estimate with every cost broken out. No pressure, no surprises. Call Groundwork Construction Co. at (888) 426-8078 to schedule your free on-site estimate, and ask about our current offers, including $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co.












