







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Balch Springs: What It Costs and How Long It Takes
A tub-to-shower conversion in Balch Springs typically runs $3,500 to $10,000 and takes 5 to 10 working days from demo to final inspection. The conversion means pulling the existing tub and its surround, reworking the drain and valve, sealing the wet area with a waterproof membrane, and setting a new shower pan, walls and glass. Most of the homes we open up here are pier-and-beam or shallow slab ranches, so what we find under the tub drives the number as much as the tile does. Call (888) 426-8078 to book a free on-site estimate.
How the Job Actually Runs, Stage by Stage

This is not a pick-a-tile-and-go job. A tub-to-shower conversion moves plumbing, changes the footprint of a wet area, and has to pass inspection. Here is the real sequence, so you know where your decisions land.
Day 1: Demo and open-up
We pull the tub, surround, valve trim and any old drywall back to studs. On Balch Springs homes from the 1950s through the 1970s, that opening is where surprises show up: original galvanized supply lines that are one flush from failing, or a drain shoe rusted past saving. You decide on the spot whether to reuse the existing valve or replace it while the wall is open. Replacing it now is cheap; opening the wall again in two years is not.
Days 2 to 4: Rough plumbing and inspection
We relocate the drain to the new pan center, set the new valve and trim, and rough in any blocking for grab bars or a bench. Then the rough-in gets inspected before anything closes up. This stage is where you commit to the shower floor length – a 36-inch base fits most original tub alcoves; stepping up to 48 or 60 inches is where the price climbs. You also lock in the valve brand here, and we use Kohler or Moen for most conversions because replacement cartridges are available locally for decades.
Days 4 to 6: Waterproofing
A cement backer board goes up, then a bonded waterproof membrane over the walls and pan, then a flood test that holds the pan under water for a set period before we ever set a tile. Skip this step and you’ll be redoing the whole thing in five years. We schedule the flood test so the inspector can see it, and the timing is not something we compress.
Days 6 to 9: Tile, glass and fixtures
Wall tile and the shower floor go down, then grout cures, then glass and trim. If you’re choosing a stone-look quartz, Silestone and Caesarstone both cut clean for a sill or bench top; ceramic and porcelain are the workhorses for walls and hold up to a humid Texas bathroom better than natural stone without annual sealing. This is your last easy point to change a finish without eating a restock fee.
Day 10: Final inspection and walkthrough
Final inspection, then a walkthrough where we show you the drain slope, the valve service stops and the caulk lines. Anything on the punch list gets handled before we call it done, and the workmanship is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Once the rough-in is set, the rest is selection. Here is what moves the look and the number, and the honest trade-off on each.
- Shower base material: Acrylic pans are the budget pick and won’t chip easily, but they flex underfoot and look plastic. A tiled pan with a linear drain gives a seamless floor and cleans up in one swipe, but it’s the slowest, most skill-heavy part of the job and the most expensive.
- Wall finish: Large-format porcelain (12×24 or bigger) means fewer grout lines and less scrubbing in a humid bathroom. Ceramic is cheaper per square foot and forgiving to cut, so it suits a tight budget without looking cheap.
- Glass: Frameless glass opens up the room and is the look most Balch Springs homeowners ask for. A framed slider costs a fraction of frameless and takes a beating, but it traps soap scum in the track.
- Valve and trim: A Kohler or Moen pressure-balance valve with a matching trim is the standard, and replacement cartridges stay on the shelf for years. A thermostatic valve adds control and cost, and it’s worth it only if you’ve had scald issues.
- Bench or niche: A built-in bench needs framing and blocking during rough-in – it’s cheap then, expensive later. A recessed niche is a small line item that saves you from a rusty caddy hanging off the valve.
What Tub-to-Shower Conversion Costs in Balch Springs, TX

Most tub-to-shower conversions in Balch Springs land between $3,500 and $10,000. A standard 36-inch alcove with porcelain tile, a stock pan and a framed glass door sits at the low end. A 60-inch walk-in with a tiled pan, linear drain, frameless glass and a bench pushes toward the top.
| Line item | Typical range |
|---|---|
| Demo, haul-off and rough plumbing | $900 – $2,200 |
| Waterproofing and flood test | $400 – $1,100 |
| Shower pan, tile and wall finish | $1,200 – $4,000 |
| Valve, trim and fixtures | $300 – $1,200 |
| Glass door or panel | $500 – $1,800 |
| Permit and inspection fees | $150 – $500 |
What pushes the number up or down
- Footprint: Matching the original tub opening is the cheapest path. Widening the shower means moving framing and possibly a stud wall.
- Existing condition: Rot behind the surround, a failed subfloor or galvanized pipe that crumbles on contact all add labor once the wall is open.
- Relocation: Moving the drain is routine. Moving the whole shower to a different wall means relocating supply lines, venting and sometimes electrical for a fan – that’s a different scale of job.
- Material grade: Porcelain and quartz are mid-range. Natural stone and frameless glass are where budgets stretch.
- Permit scope: A straight swap with no plumbing relocation may need only a limited permit. Moving the drain or valve triggers the full rough and final inspection.
Our written line-item estimate includes demo, rough-in, waterproofing, tile, fixtures, glass, permit fees and haul-off, so the number you see is the number you pay. What it doesn’t include: hidden rot, a failed subfloor, or a full re-pipe if the supply lines fail once exposed. We price those before we touch them, never after.
See the difference
Before
After
Before
After
Before
AfterWhat Balch Springs Homes Do to This Job
Balch Springs sits on the blackland prairie, and the expansive clay under it swells with wet weather and shrinks hard in a dry summer. That movement shows up inside the bathroom. After a heavy rain, we commonly find pier-and-beam homes in the 75180 ZIP shifting just enough to open a hairline crack along the shower pan edge and to leave the bathroom door sticking on the frame. When we set a pan here, it has to tolerate that movement, which is why we bond and flood-test rather than caulk and hope.
Mid-century and 1970s single-story ranches make up much of the local stock, and many still run original plumbing and single-vent electrical. A tile job on an old bath is where we find a bathroom fan wired to a circuit with no ground, or a drain line undersized for a modern shower valve. That’s the reality of converting an original tub alcove in Balch Springs, and it’s why we open the wall before quoting a firm number rather than guessing from the door. For a larger scope, this often becomes part of a full Bathroom Remodeling in Balch Springs, and we handle it through our Bathroom Remodeling service. We cover the whole of Balch Springs, from the older blocks near the 75180 core out to the newer edges of town.
Serving Balch Springs, TX – Our Local Coverage Area
We serve Balch Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Balch Springs

A typical tub-to-shower conversion takes 5 to 10 working days, from demo through final inspection. The rough-in and waterproofing stages can’t be rushed because the flood test and inspection hold the schedule. A small alcove with stock fixtures lands near the 5-day side; a wider walk-in with tiled pan and frameless glass runs closer to 10. Call (888) 426-8078 for a firm timeline after we see the bathroom.
Yes, in most cases. Any conversion that moves the drain, changes the valve or alters the waterproofing inside a wet area needs a permit and inspection before the walls close. We pull the permits and manage the inspections so nothing stalls the schedule. Call (888) 426-8078 and we’ll walk you through what your specific job requires.
Yes. Keeping the shower in the existing tub alcove and reusing the drain location is the least invasive, least expensive route, and it’s the right call for most Balch Springs homes we see. Moving the shower to another wall means relocating supply and drain lines and possibly opening structure, which pushes the job toward the top of the range. Call (888) 426-8078 to find out which path your bathroom allows.
Expect $3,500 to $10,000 in Balch Springs. The low end is a standard alcove with porcelain tile, a stock pan and a framed door. The high end is a wide walk-in with a tiled pan, linear drain, frameless glass and a bench. Hidden rot or a failed subfloor adds to either end. Call (888) 426-8078 for a written line-item quote; estimates are free.
Every conversion we do is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the waterproofing, tile and plumbing we install, well past the point where most contractors stop answering the phone. Call (888) 426-8078 to schedule your free estimate and see the promise in writing.
If your bathroom plumbing needs attention beyond the wet area, homeowners often pair this with Metal Roofing in Balch Springs or Tile Roofing in Balch Springs when the exterior is due at the same time, so one crew can coordinate the whole scope.
Ready for a Free Estimate on Your Conversion?
Call (888) 426-8078 to schedule a free on-site estimate for your tub-to-shower conversion in Balch Springs. A live person answers around the clock, and we’ll book a visit that fits your week. On the call we’ll ask about your tub’s size, whether the plumbing is original, and what finish you have in mind. At the visit we open the wall, measure the alcove and hand you a written line-item quote. No pressure, no change orders after the fact.
Written by the team at Groundwork Construction Co.












