







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Balch Springs, TX: Cost, Timeline, and What to Pick
Cabinets & countertops in Balch Springs run $14,000 – $45,000 for a full replacement, with most single-story ranch homes landing between $18,000 and $28,000. The job takes three to four weeks from demolition to final caulk, longer if the layout changes. Cabinets go in first, then the template for stone, then counters about 7 – 10 days later. Call (888) 426-8078 for a free on-site estimate before you commit to a number.
How We Sequence a Cabinet and Countertop Job in Balch Springs

Cabinets and counters are two trades that have to hand off cleanly. The stone can’t be cut until the boxes are set and level, and nobody wants a counter templated against a cabinet run that moves. Here’s the order we run, and what you decide at each step.
Stage 1: Site measure and layout sign-off (1 – 2 days)
We measure the room, check wall plumb and floor level, and confirm appliance clearances against your spec sheet. You approve the layout drawing and sign off on cabinet sizes. On Balch Springs pier-and-beam homes, we also check for floor deflection here – a run that sags 3/4 inch across 10 feet will telegraph through any countertop, stone especially.
Stage 2: Demo and prep (2 – 3 days)
Out come the old boxes and counters, then the wall repair, drywall patching, and any electrical or plumbing rough-in the new layout requires. If you’re keeping your sink location, this stage is short. If the sink or range is moving, plan on an extra day and a permit. The subfloor gets checked here too; water damage around the sink base is common in older homes.
Stage 3: Cabinet install (3 – 4 days)
Base cabinets, uppers, fillers, toe kick, and crown all land in this window. We shim and level to within 1/8 inch across the run, which is what makes the counter template accurate. You make one decision here: final cabinet hardware, if it’s not already drilled.
Stage 4: Counter template and fabrication (7 – 10 days)
A fabricator comes out to template the finished cabinet run. Stone is cut at the shop, not on site. That week-plus window is the part homeowners underestimate; it’s baked into the 3 – 4 week schedule from day one. You pick the slab edge profile before template.
Stage 5: Counter install, sink set, backsplash, punch (2 – 3 days)
The countertop is set, the sink is dropped and sealed, the faucet connects, and the backsplash gets completed. Then we walk the room with you and write down anything that needs correcting. That punch list gets closed before we call the job done – and it’s all covered by our 730-Day Done Right Promise, so if something fails in year one, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Cabinets and Countertops Options You’ll Actually Choose Between
Nothing here is “the best” in a vacuum. Each pick trades cost against durability, and the right one depends on how you cook and how long you plan to stay.
- Stock cabinets (particleboard box, thermofoil or laminate door): Cheapest tier, roughly $4,000 – $7,000 for a typical run of boxes. Fine in a rental or a flip. Not what we’d recommend for a home you’ll keep through humid Texas summers, because swelling at the sink base is common.
- Semi-custom plywood cabinets (KraftMaid and similar): The middle of the market, usually $7,000 – $11,000 with install. Plywood boxes hold up to moisture far better, and you get door style and finish choices. This is where most Balch Springs homeowners land.
- Full-custom cabinets: $13,000+ for the boxes alone. Worth it when the room is oddly shaped or you want a specific storage layout, not worth it for a standard rectangle.
- Quartz (Silestone, Caesarstone): $45 – $85 per square foot installed. Non-porous, doesn’t need sealing, handles the heat and humidity here. The default for good reason.
- Granite: $40 – $75 per square foot installed. Beautiful, but porous; it wants resealing every 1 – 2 years, and some slabs are more prone to staining.
- Laminate: $20 – $40 per square foot installed. Cheapest, and modern laminate looks far better than the 1990s version. It scratches, though, and heat near a slow cooker or hot pan will mark it.
- Butcher block: $35 – $60 per square foot installed. Warm and forgiving of dropped dishes. Needs oiling a few times a year, and it can’t sit next to a sink without careful sealing.
Sinks and faucets are a smaller decision but a real one: a Kohler undermount sink with a Moen pull-down faucet is a solid, long-lived combo and the one we install most. If the remodel is part of a wider scope, see Kitchen Remodeling in Balch Springs for how cabinets and counters fit the larger plan.
What Cabinets & Countertops Cost in Balch Springs, TX

Expect $14,000 – $45,000 for cabinets and countertops together in Balch Springs. Cabinet installation alone runs $4,000 – $13,000; countertop installation runs $2,000 – $6,500. Here’s roughly how the budget splits:
- Cabinets (boxes, doors, install): $4,000 – $13,000
- Countertops (material, fabrication, install): $2,000 – $6,500
- Backsplash: $800 – $2,500
- Sink and faucet: $400 – $1,200 typical
- Permit and inspection (if plumbing or electrical moves): a few hundred dollars
Five things push a job toward the high end. Size is first – a big U-shaped kitchen with an island costs more than a galley every time. Cabinet grade is second. Third, moving the sink, range, or a wall: relocating plumbing or a gas line means a permit, a plumber, and a longer schedule. Fourth, the counter material; quartz at the top of the range runs more than laminate. Fifth, what we find after demo – rotted subfloor, out-of-plumb walls, or knob-and-tube wiring in a 1960s ranch.
Our written estimate is line-item, with a fixed price and no change orders unless the scope genuinely changes. It includes cabinets, counters, install, and cleanup. It does not include appliances, which you buy, or structural changes we discover mid-job. The professional crew that does the work is background-checked and arrives in uniform.
See the difference
Before
After
Before
After
Before
AfterWhat Balch Springs Homes Specifically Do to This Job
Balch Springs sits on the Texas blackland prairie, where expansive clay soil swells when it’s wet and shrinks when it dries. After a heavy rain, pier-and-beam homes around the 75180 ZIP commonly shift and settle, and the first sign shows up inside as uneven floors and doors that stick. For cabinets and countertops, that’s not a footnote. A run of cabinets installed on a floor that’s out of level by an inch will gap at the ceiling, bind at the drawers, and force the counter fabricator to shim things you’d rather not see. We check floor level before we set a single box.
Most of the housing stock here is mid-century to 1970s single-story ranch, often with original plumbing and electrical. That means a sink relocation usually needs a permit and an inspection, and any electrical move needs to be brought up to current code so it passes. The hot, humid summers and periodic heavy rain also accelerate moisture problems around the sink base and under windows, so we budget for replacing soft subfloor and checking cabinet backs for rot. It’s the same set of conditions the team sees on other jobs in Balch Springs, and it’s why we plan the schedule with a cushion.
Serving Balch Springs, TX – Our Local Coverage Area
We serve Balch Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Balch Springs

Plan on three to four weeks from demo to final walkthrough. The long pole is the counter template and fabrication, about 7 – 10 days, which runs while the cabinets sit installed. A job that keeps the sink and range in place finishes faster than one that moves plumbing. Call (888) 426-8078 and we’ll give you a schedule tied to your specific kitchen.
You need a permit if the work moves plumbing, gas, or electrical; a straight swap of cabinets and counters in the same layout usually doesn’t require one. When a permit is needed, we pull it and schedule the inspection so it passes the first time. Ask us on the estimate call and we’ll tell you exactly which applies to your job.
Yes, and it’s the most common version of this job. Keeping the sink and range where they are and re-using the same footprint avoids permits and cuts a week off the schedule. Moving a wall or a drain line is a bigger scope and a different conversation. Call (888) 426-8078 to talk through which is right for your room.
The range is $14,000 – $45,000, with cabinets at $4,000 – $13,000 and counters at $2,000 – $6,500. Quartz runs more than laminate, plywood boxes run more than particleboard, and any plumbing move adds permit and labor cost. Call (888) 426-8078 for an exact, line-item quote – the estimate is free and there’s no pressure.
Every cabinet and countertop job is covered by our 730-Day Done Right Promise. If something we installed fails or isn’t right, we come back and fix it – that’s one of the longest workmanship guarantees in residential construction. Ask for it in writing on your estimate. Call (888) 426-8078 with any warranty question before you sign.
Some Balch Springs homeowners pair a kitchen refresh with a bathroom update – our Walk-In Showers & Shower Remodeling in Balch Springs and Tub-to-Shower Conversion in Balch Springs services are the usual add-ons. If you want the full picture of what we do, start with our Kitchen Remodeling service hub.
Get a Free Cabinets & Countertops Estimate in Balch Springs
We’ll come measure your kitchen, check floor level and wall plumb, and hand you a written line-item estimate before any work starts – no surprises, no pressure. The number you see is the number you pay. Calls are answered by a live person 24/7, and there’s 0% financing for 18 months plus $1,000 off projects over $10,000. Call (888) 426-8078 to schedule your free on-site estimate in Balch Springs.
Written by the team at Groundwork Construction Co.












