







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Lucas, TX: What You’re Actually Buying
New cabinets and countertops in Lucas, TX typically run $14,000 – $45,000 for a full kitchen’s worth of cabinetry and stone, and most jobs are finished in three to five weeks from demo to final caulk. Cabinet installation alone lands at $4,000 – $13,000; countertops at $2,000 – $6,500; a freestanding island adds $3,000 – $10,000. On acreage properties the sequence matters more than the showroom, because a second trip out to a long driveway costs everyone a day. Call (888) 426-8078 to schedule a free on-site estimate and get a written line-item quote before anything is ordered.
How a cabinet and countertop job actually runs, start to finish

Most contractors describe this as “demo, install, done.” It isn’t. Here’s the real sequence we work to on a Lucas kitchen, stage by stage, with the decision you own at each one.
Stage 1: Measure and layout (day 1, about 2 hours on site)
We template the existing walls, note out-of-square corners, check where the electrical and plumbing stubs sit, and confirm the ceiling height and any bulkheads. On older Lucas homesteads this is where surprises surface: a wall that’s an inch out over eight feet, or a water line that runs through the base cabinet cavity. You decide cabinet layout here (base configuration, drawer stack, whether the island is fixed or rolling), because everything downstream keys off it.
Stage 2: Demo and prep (days 2 – 3)
Old cabinets and countertops come out, appliances get pulled and stored, and the drywall behind them gets patched and primed. If the floor is being replaced, that happens now. This is also when we cut in any new electrical for under-cabinet lighting or a relocated outlet. Two to three working days for a typical Lucas kitchen; longer if there’s tile to remove.
Stage 3: Cabinet install and shim (days 4 – 6)
Bases go in first, leveled and shimmed against the wall, then uppers, then the island. Doors and drawers stay off until the boxes are set and screwed through the studs. You walk the layout before we lock anything down. Roughly three days for a standard kitchen, a day more for a large custom layout with a tall pantry run.
Stage 4: Countertop template and fabrication (days 7 – 12)
A templator comes to measure the installed cabinets to the millimeter. Stone is cut off-site, which takes about five to seven business days for quartz or granite. You pick the slab, the edge profile (eased, beveled, ogee), and the sink cutout here. This is the one stage you can’t compress, so plan the microwave-and-paper-plates stretch accordingly.
Stage 5: Countertop set, sink, and final trim (days 13 – 16)
The slab or slabs get set on the cabinets, seams are epoxied and polished, the sink and faucet go in, and the dishwasher gets tied back in. Final tweaks to doors and drawer fronts, then a punch walk with you before we call it done. Every project carries our 730-Day Done Right Promise, which covers workmanship for two full years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between, and what each one really costs you
- Stock vs. semi-custom vs. full custom cabinets. Stock boxes in fixed sizes are the cheapest path and work fine in a simple square kitchen; semi-custom (KraftMaid’s line is one we install regularly) lets you adjust widths and depths and gives you a real finish palette, which matters on the odd wall dimensions common in Lucas custom homes. Full custom is the top of the range and buys you exact fits and unusual configurations. Expect the gap between stock and semi-custom to be the single biggest number in your quote.
- Plywood vs. particleboard boxes. Plywood boxes handle North Texas humidity swings better and hold screws at the hinges longer. Particleboard is cheaper and fine in dry interior walls, but we don’t spec it under a sink.
- Quartz vs. granite vs. butcher block. Quartz is non-porous, needs no sealing, and holds color consistency across slabs, which is why it’s our most-requested counter surface. Granite is natural stone, unique per slab, and needs resealing roughly once a year. Butcher block is warm and repairable but wants oiling every few months and shows water rings if you’re careless. Cambria is a solid quartz brand we install; the cost difference versus an entry-level quartz usually comes down to slab size and edge profile.
- Slab thickness and edge profile. Standard 2cm or 3cm slabs, eased or beveled edges, are the budget-friendly default. A built-up mitered edge that reads as 3-inch-thick stone adds fabrication time and labor.
- Under-cabinet lighting and drawer organizers. Cheap to add at install, expensive to retrofit. Decide now.
What Cabinets & Countertops costs in Lucas, TX

A full kitchen’s cabinetry and countertops in Lucas runs $14,000 – $45,000 as a combined job. If you only need cabinets, budget $4,000 – $13,000; counters alone run $2,000 – $6,500. Add $3,000 – $10,000 if you’re building a freestanding island with its own cabinet base and stone top.
What pushes a job toward the top of that range:
- Cabinet count and configuration. A 12-box galley is a different job than a 30-box kitchen with a tall pantry and an island.
- Material grade. Stock particleboard to full custom plywood is the widest swing in the whole quote. Same with entry quartz versus a premium slab.
- Existing condition. Out-of-square walls, a floor that needs leveling, or old plumbing that has to be rerouted behind the new cabinets all add days and materials.
- Relocation of plumbing or electrical. Moving a sink, adding a dishwasher circuit, or running a new outlet for the range hood is real work and needs a permit.
- Structural changes. Taking out a wall to open the kitchen is a different project and prices accordingly.
What our written estimate includes: cabinets, countertops, fabrication and install labor, sink and faucet if you’ve chosen them, haul-away of the old units, and permit fees. What it typically doesn’t include: new appliances, new flooring, or backsplash tile.
See the difference
Before
After
Before
After
Before
AfterWhat Lucas homes specifically do to this job
Lucas is acreage and large-lot custom country on the Blackland Prairie in ZIP 75002, north of Wylie and Allen. Two things follow from that for a cabinet and countertop job. First, the housing stock: many homes here are newer custom builds with generous kitchen footprints, but they sit alongside older rural homesteads where the kitchen was framed decades ago and nothing is plumb. We see far more out-of-square walls and floor height variance on those properties than you’d find in a tight-lot subdivision. Second, the ground: expansive clay soil that swells and shrinks with our wet-and-dry cycles does move foundations, and a settled slab shows up as base cabinets that won’t sit flush without shimming. We check for it during the measure stage and adjust the install plan accordingly.
On the practical side, longer service drives mean we batch site visits rather than making three short trips, so the measure, template, and install all get scheduled deliberately. Your written quote spells out what’s covered and what isn’t, so there’s no change-order surprise mid-install. And when a cabinet job turns out to be part of a full Kitchen Remodeling in Lucas, we scope the two together so you’re not paying twice for the same demo day. Homeowners here often pair a kitchen refresh with Walk-In Showers & Shower Remodeling in Lucas or a Tub-to-Shower Conversion in Lucas while the crew and the dumpster are already on site.
For the broader scope of what a kitchen project can cover, see our Kitchen Remodeling service page, and for everything else we handle in the area, the Lucas service-area page lays it out.
Serving Lucas, TX – Our Local Coverage Area
We serve Lucas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Lucas

A typical Lucas kitchen takes three to five weeks from demo to final walk, with the countertop fabrication alone accounting for five to seven business days of that. The cabinet install itself is usually three to four days; the rest of the timeline is prep, templating, and the stone shop’s schedule.
Like-for-like cabinet and countertop swaps generally don’t require a permit, but anything that touches plumbing or electrical does. If you’re moving the sink, adding a dishwasher circuit, or relocating a range hood, that work gets permitted and inspected. We pull the permits where they’re required and schedule the inspection as part of the job.
Yes, and that’s the most common scope we run. As long as the sink and dishwasher stay in roughly the same location and no wall comes out, the job is a straight swap. It’s also the biggest cost saver: no plumbing, no electrical, no structural work, no permit.
Plan on $14,000 – $45,000 for a full kitchen’s worth of cabinets and countertops, with cabinet installation at $4,000 – $13,000 and countertops at $2,000 – $6,500 on their own. The variables that move the number are cabinet count, material grade, and whether the existing walls and floor need correction. Call (888) 426-8078 for an exact quote on your kitchen; estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise, which runs two full years from completion. If something isn’t done right, we come back and make it right. Manufacturer warranties on the cabinets and countertops run separately and we hand you the paperwork at final walkthrough.
Get a free estimate on your Lucas kitchen
We’ll come out to your property, measure the space, walk through cabinet and countertop options with you, and leave you with a written line-item quote that spells out exactly what’s included. No surprises, no change orders after the fact. Call (888) 426-8078 to schedule your free on-site estimate, and a live person will pick up. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available if you’d rather spread the cost.
Written by the team at Groundwork Construction Co.












