







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Lucas: What the Job Actually Involves
Custom and geometric windows in Lucas, TX usually run $8,000 – $25,000 for a whole-home or major addition install, with most single feature walls landing in the $4,500 – $12,000 range. Expect 4 – 8 weeks from signed contract to final inspection: 2 – 3 weeks for design and manufacturing plus 1 – 2 weeks on site. These aren’t stock units stacked into a rough opening. Arched transoms, angled bays, trapezoids, half-rounds, and oversized fixed glass get measured to the stud, templated, and built to fit your wall. Call (888) 426-8078 to get an exact scope and a written line-item price for your Lucas home.
How We Sequence a Geometric Window Install in Lucas

Every custom window job follows the same five stages. What changes is how long each one takes based on the shape complexity and how much of the wall we’re cutting into.
Stage 1: On-site measure and template (day 1, roughly 2 hours)
We don’t measure the opening. We measure the rough opening, the framing, and the structural load above it. For angled and arched units we build a physical template of the opening so the manufacturer cuts to the actual wall, not to a nominal size. You decide the window shapes, the sightline layout, and whether the feature wall gets one large unit or a divided assembly. This is when we flag any framing that needs sistering or header work before the order goes out.
Stage 2: Design approval and manufacturing (2 – 3 weeks)
You get a scaled elevation showing every unit, mullion, and finish. Approve it and the manufacturer cuts. A rectangular picture window ships in 10 – 14 days; a true arched or trapezoidal unit can push to 3 – 4 weeks. We schedule site work around that delivery date so we’re not tearing into your wall before the glass shows up.
Stage 3: Demo and rough framing (1 – 2 days)
Old units come out, the opening gets cut or enlarged, and the framing gets squared and leveled. Geometric openings almost always need custom header and cripple framing to carry the load above. We check the structure and shim to true. If a window is going into a wall where framing is questionable, that gets addressed here, not covered up.
Stage 4: Set, flash, and seal (1 – 2 days)
Units get set plumb, shimmed, and anchored per manufacturer spec. Flashing goes on in the right sequence: sill pan first, then jamb, then head. We seal with proper backer and a high-grade exterior sealant rated for North Texas heat cycling. Geometric units get extra attention at the mitered joints because that’s where water finds a way in.
Stage 5: Trim, finish, and final walk (1 day)
Interior trim goes back, exterior caulk gets finished, and you walk the job with us. We check operation on every operable unit, verify the flashing, and clean the glass. Most single feature walls are done in 3 – 5 site days total. Whole-home jobs stretch to 8 – 12.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The shape is the fun part. The material and glazing decisions are what determine how the window looks and holds up ten years from now.
- Frame material: vinyl vs. aluminum-clad wood vs. fiberglass. Vinyl is the most cost-effective and holds up well in North Texas heat, but it’s limited on true curved and angled profiles. Aluminum-clad wood lets you get complex geometry with a real wood interior; you pay 30 – 50% more and you maintain the interior finish. Fiberglass splits the difference on durability and handles more shapes than vinyl. For geometric units, vinyl often can’t do the shape, so clad or fiberglass is the practical answer.
- Glass and Low-E coating. Standard dual-pane with a Low-E coating is the baseline in Lucas. A solar-heat-gain coating matters on west and south walls where Texas afternoon sun drives cooling load. Upgrade to a laminated or impact-rated assembly if you want storm resistance; that pushes cost up but also cuts heat and noise.
- Grille and mullion pattern. Geometric windows live or die on the layout. Simulated divided lites give a traditional look; a clean single pane lets the shape speak for itself. We’ll show you both on a scaled elevation before you commit. Windows & Doors in Lucas covers how these assemblies tie into the rest of the envelope when the feature wall is part of a full exterior project.
- Brand and system. For complex shapes we specify from makers that actually build to template. ES Windows and ECO Window Systems both handle custom geometry well in this climate. Therma-Tru is the entry-door answer when the window wall is paired with a new front system.
- Finish and hardware. Factory-applied paint or a baked finish on clad units holds better than site-painting. Operable units need hardware that matches the rest of the house, especially on a feature wall that guests actually touch.
What Custom & Geometric Windows Costs in Lucas, TX

Plan on $8,000 – $25,000 for a full custom install, $4,500 – $12,000 for a single feature wall or bay, and roughly $800 – $2,500 per oversized or shaped unit on its own. Those ranges reflect the Lucas market.
Five things move the number:
- Shape and count. A single arched transom is one number. A three-unit angled bay with a half-round over it is another. Each shaped unit is cut to order and priced accordingly.
- Existing wall condition. Cutting into brick or a load-bearing wall needs header work and brick matching. A wall that’s already framed is faster and cheaper.
- Material grade. Vinyl-to-clad-wood is the biggest single jump. Fiberglass and clad units cost more but make complex geometry possible.
- Glazing upgrades. Low-E, laminated, or impact-rated glass adds cost per unit but pays back in cooling and storm resistance.
- Permit and scope. Structural changes, new openings, or egress requirements add inspection cycles and paperwork. That’s real cost, not padding.
A written estimate from us lists each unit, the framing, flashing, trim, and permit line separately. What it typically doesn’t include: interior drywall repair beyond the opening, painting, or window coverings. We’ll tell you what’s excluded up front so there’s no surprise on the final invoice. Our pricing is fixed: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Lucas Homes Specifically Do to This Job
Lucas is semi-rural Collin County, ZIP 75002, and the housing stock reflects it: large-lot custom homes and acreage properties on the Blackland Prairie north of Wylie and Allen, with detached shops, barns, and outbuildings that you won’t find in the tighter subdivisions next door. That changes a custom window job in ways a suburban contractor won’t anticipate. Much of this work involves site-built additions, sunrooms, and shop or barn conversions where the opening doesn’t match any standard unit. We template those on site because there’s no catalog to rely on.
The bigger local factor is the expansive black clay under most of these properties. It shrinks and swells with our wet-dry cycles, and that movement is hard on foundations and wall openings. On a Lucas house, a window that was square when it was framed can get racked out of true over a few seasons. We check for that during the measure stage and shim and flash accordingly. If the framing has already gone out of square, that gets addressed before glass goes in. That’s a problem far less common on the sandier ground closer to central Collin County, so it’s a detail we plan for here.
We also handle the drive. Acreage properties mean longer runs out, and we plan the schedule around it so a two-day install doesn’t become a four-day one. When the job sits on a long gravel or failing drive, homeowners often pair this with Concrete Driveways & Concrete Work in Lucas or Asphalt Driveways & Resurfacing in Lucas to protect access and finish the approach at the same time.
If you’re weighing a feature wall against a wider exterior scope, our full Windows & Doors service covers the rest of the envelope. And for Lucas and the surrounding towns, our Lucas service page lays out the coverage.
Serving Lucas, TX – Our Local Coverage Area
We serve Lucas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Lucas

Most feature-wall installs run 4 – 6 weeks total: 2 – 3 weeks for design and manufacturing, then 3 – 5 days on site. A whole-home custom window job can take 8 – 12 weeks. The single longest stage is manufacturing the shaped units, so the earlier you approve the elevation, the sooner the glass arrives. Call (888) 426-8078 to get a firm timeline for your specific scope.
New openings, structural header changes, and egress windows in Lucas require a permit and inspection. A straight replacement of an existing unit in the same opening often doesn’t. We pull the permit when one is required and schedule the inspections, so it’s not a line item you have to manage. Call (888) 426-8078 and we’ll tell you which category your job falls into.
In many Lucas homes, yes. If the feature wall is on the exterior envelope where no plumbing or electrical runs, we can set the new geometry in the same general wall zone with framing changes only. If the layout requires a new opening through an interior load path or over a wet wall, the scope grows and the timeline with it. We map what’s in the wall before demo. Call (888) 426-8078 for an on-site walkthrough and a straight answer.
Custom and geometric windows in Lucas run $8,000 – $25,000 for a full install and $4,500 – $12,000 for a single feature wall or bay. Single shaped or oversized units price around $800 – $2,500 each depending on material and glazing. Call (888) 426-8078 for an exact quote. Estimates are free.
Every custom & geometric window job we do is covered by our 730-Day Done Right Promise: if something isn’t right, we make it right. That sits on top of the manufacturer’s own warranty on the units and glass. If a seal fails or an operable unit stops operating smoothly, call us and we handle it. Call (888) 426-8078 to schedule your free estimate and we’ll put the warranty terms in writing.
Get a Free Estimate for Custom & Geometric Windows in Lucas
Call (888) 426-8078 to schedule a free on-site estimate for custom and geometric windows in Lucas. We answer live, 24/7, so you won’t hit voicemail. A technician will measure the openings, show you scaled elevations of the shapes you’re considering, and hand you a written line-item price with no change-order surprises. Background-checked, uniformed technicians, upfront pricing, and the 730-Day Done Right Promise on every job. Call today to get started.
Written by the team at Groundwork Construction Co.












