







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Garland, TX: What It Takes
Concrete driveways & concrete work in Garland typically run $4,500 – $12,000 for a full driveway pour, and most residential jobs are finished in 5 to 8 working days from demo to the day you park on it. That range covers a standard two-car apron with base prep, forms, and reinforcement. Call (888) 426-8078 and a live person answers, day or night, to set up a free on-site estimate.
The number that comes out of a written quote depends on square footage, how much old concrete has to come out, and how much grade work your lot needs. Around Garland’s older ranch lots, drainage corrections come up more often than people expect.
How the work actually goes, stage by stage

Concrete work is unforgiving about sequence. Skip a step and you’ll see it in three winters, so the day-by-day order below is the same one we hold our independent crews to on every Garland job.
Day 1 – the walk-through and layout. We measure the pour, mark expansion and control joint lines in paint, and confirm the slope away from the slab and garage door. You decide the width, the thickness (4-inch standard versus 5-to-6-inch for anything that holds a heavy truck or a detached shop apron), and whether the finish is broom, exposed aggregate, or a light stamp. This is the day to change your mind, before anything is cut.
Day 2 – demo and haul-off. The old slab gets broken, loaded, and removed. Most two-car driveways take a single day, though a long service drive to a rear shop can spill into a second morning. You’ll want your vehicles out of the way and gates open for the trucks.
Days 2 – 3 – excavation and base. We dig to depth, grade for drainage, and compact a crushed-stone base in lifts. On North Texas clay this step is where the money gets spent quietly. A proper compacted base and a moisture barrier under the slab do more for long-term performance than any finish upgrade.
Days 3 – 4 – forms, rebar or mesh, and inspection. Forms get set, reinforcement placed, and the pour height checked against the garage threshold. If the job needs a permit, the inspection happens before the concrete goes in, not after. You sign off on layout at this stage.
Days 4 – 8 – the pour, finishing, and cure. The pour goes in early morning while it’s cool. Finishing, joint-cutting, and curing follow, and then the driveway sits covered for several days so it can gain strength. Light foot traffic after a couple of days, vehicles after about a week, heavy trucks longer. Houston-area schedules don’t apply here, but the cure clock doesn’t skip either.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll pick between
- Standard broom-finished concrete at 4 inches – the value choice for a normal residential drive, and the easiest to keep clean. Best for cars and light pickups.
- 5-to-6-inch pour with heavier rebar – what we recommend for anyone who parks a work truck, an RV, or runs a drive to a detached shop. Costs more up front, holds up under point loads that crack a 4-inch slab.
- Exposed aggregate or light stamp – more grip in the wet, more curb appeal, and a finish cost that can add a noticeable chunk to the total. It also needs occasional resealing to keep its color.
- Widened or curved layout – a turn-around pad, a widened approach at the street, or a curved edge. Each one adds concrete, forms, and time.
- Integrated drainage – a channel drain or a swale worked into the grade where the lot slopes toward the house. Critical on tighter Garland lots and older ranches where the yard already pitches the wrong way.
We work with reinforced base and mix specifications from established suppliers rather than whatever the truck pulled. If a prefabricated structure from a maker like Mighty Buildings or Plant Prefab is on your radar for a future build, tell us early. It changes where the drive needs to land.
What Concrete Driveways & Concrete Work costs in Garland, TX

Concrete driveway installation in Garland lands at $4,500 – $12,000. A full replacement, which includes demo and haul-off of the old slab, runs $5,000 – $14,000. Here’s what moves a job to the low or high end of that range:
- Square footage and shape. A tight two-car apron sits near the bottom. A long service drive with a curve or a turn-around pad pushes toward the top.
- Condition of what’s there. Solid subgrade with an easy breakout is fast. Roots, broken slab, or a hidden old footing underneath adds demo time and hauling cost.
- Grade and drainage. A lot that already sheds water correctly needs no extra work. One that pitches toward the house needs a swale or drain, and that’s real labor and material.
- Thickness and finish. Standard 4-inch broom is the baseline. Heavy-duty thickness, exposed aggregate, or stamping each add cost.
- Permit and inspection scope. Jobs that trigger a city permit add a line item and a scheduling step. We pull them ourselves. You get a written, line-item quote before work starts, and the number you see is the number you pay.
What’s typically included: demo, haul-off, base prep, reinforcement, forms, pour, finish, and cleanup. What’s usually separate: any relocation of a sprinkler line, gas line, or downspout that runs through the path, and landscaping repair after the trucks leave.
See the difference
Before
After
Before
After
Before
AfterWhat Garland homes specifically do to this job
Garland splits cleanly along construction era. The older core near downtown, in 75040, 75041, and 75042, is post-war tract and brick ranch territory. Out toward 75043 and 75044 you’re in 1970s-to-90s subdivisions and newer master-planned additions. That matters because a driveway pour in a 1955 ranch is a different animal than one in a 1985 two-story. The older lots often sit on original slab-on-clay foundations with 100-amp or fuse-era electrical service tucked along the drive path, and grade that’s had sixty years to settle wrong. Blackland Prairie clay here swells in wet springs and shrinks hard in summer, which is why drainage deserves real attention on every Garland pour, not just the ones that already pond. Garland also runs its own permitting and inspections rather than deferring to the county, so plan on that step. We cover Garland from the old core out to the newer northern additions, and the crews we send know which decade of code they’re walking into before the bid goes out.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Garland

Plan on 5 to 8 working days for a standard residential driveway, from demo through the day you can park on it. Cure time is the slowest part, and it doesn’t speed up for anyone. Call (888) 426-8078 for a schedule built around your specific lot.
Some driveway and approach work requires a city permit, and Garland inspects its own jobs. We pull permits ourselves and build that step into the schedule, so you’re not chasing it. Call (888) 426-8078 and we’ll confirm what your property needs.
Usually yes, with planning. Sprinkler lines, gas runs, and downspouts that cross the path are the common conflicts, and relocating them is a separate cost. We flag them at the estimate stage so there are no surprises mid-pour. Call (888) 426-8078 before you commit to a layout.
Installation runs $4,500 – $12,000, and full replacement with demo lands at $5,000 – $14,000. Thickness, drainage correction, and finish choice are what separate a low quote from a high one. Call (888) 426-8078 for an exact quote. Estimates are free.
Every job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right, and that’s in writing. Concrete is a long-horizon product, so we back it that way. Call (888) 426-8078 to get the details for your project.
If the driveway is one piece of a larger yard plan, this often pairs with a full Driveway & Pavers in Garland scope, and many homeowners adding living space pair it with a Garage Conversion ADU in Garland or a New Detached ADU in Garland, where the drive has to reach a new structure. You can also see our wider Driveway & Pavers work.
Get a free concrete estimate in Garland
Call (888) 426-8078 for a free on-site estimate on concrete driveways & concrete work in Garland. A live person picks up, day or night. We’ll measure your lot, walk the drainage, and hand you a written line-item quote with the price locked. Ask about $1,000 off projects over $10,000 and 0% financing for 18 months. Financing and honest numbers, no change orders.
Written by the team at Groundwork Construction Co.












