







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Fence Repair in Garland, TX Actually Involves
Fence repair in Garland typically runs $350 – $2,400 for common fixes, and the job is usually quoted and scheduled within the same week. Most repairs come down to a handful of failures: storm-lifted pickets, rotted posts at the soil line, sagging gates, and leaning panels after a good North Texas wind. Call (888) 426-8078 and we’ll send someone out to look at it, price it in writing, and fix only what’s actually broken. Groundwork Construction Co. handles fence repair across Garland with background-checked, uniformed technicians and a fixed price you see before we start.
How We Handle Fence Repair, Step by Step

Fence repair rewards a real sequence. Skip a step and you’re back out there six months later. Here’s how a typical repair goes from first call to final walkthrough.
Day 1: Inspection and written estimate
We walk the full run with you, not just the broken section. We check post footings, test for rot at and below grade, and look at how the panels sit against the rails. That’s where we find the second problem you didn’t call about. You’ll get a line-item estimate before anyone touches a board, and the number you see is the number you pay.
Material selection: your call, our recommendation
You decide whether we match the existing material or upgrade the failing section. If we can source the same board profile, we will; if it’s a discontinued vinyl line or a weathered cedar that won’t match, we’ll show you what a close match looks like and let you choose. Decisions like this happen on day 1 so there’s no mid-job surprise.
Teardown and prep
We pull the damaged posts, rails, and pickets and haul it off. If a footing is still sound, we reuse it. If the concrete has cracked or the post rotted below grade, the old footing comes out and a new one goes in. That prep day is one of the biggest variables on the quote, because you don’t know what’s below grade until you dig.
Rebuild and set
New posts go in first and set in concrete. Most repairs of this scope are finished in a single visit once the concrete cures, with the panel and gate work done on top of it. We square the gate, hang it on adjustable hardware, and check the latch alignment so it doesn’t drag. Two or three days for a larger run with multiple failed posts, one day for a pickup-stick repair.
Final walkthrough and paperwork
We walk the fence with you, open and close the gate a few times, and clean up the site. You get the completion record and the workmanship warranty in writing. All our work carries the 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Garland Repair
Repair decisions are more limited than a new build, but the choices still matter. Here’s what you’ll actually be picking from.
- Full-panel replacement vs. pickup repair: If a few pickets are cracked but the rails are solid, pickup repair is the cheaper move and runs well under $500. If the whole panel has shifted off its posts, the panel comes down and goes back up new.
- Post footing replacement: The single biggest cost driver. A rotted post at the soil line needs a new footing, and that means concrete, cure time, and labor. A full post replacement runs $150 – $450 each depending on depth and access.
- Cedar vs. treated pine vs. composite: Cedar resists rot better and holds stain longer, but costs roughly 20 – 30% more for the same boards. Treated pine handles the North Texas clay fine for a decade or more. Composite is the low-maintenance pick if you’re tired of restaining.
- Matching existing material vs. upgrading the run: Sometimes a partial upgrade makes sense. We’ll tell you honestly when patching is the right call and when it just kicks the problem down the road.
- Gate hardware: Self-closing hinges, adjustable latches, and heavier straps cost more but fix a sagging gate for good rather than for a season.
What Fence Repair Costs in Garland, TX

Most Garland fence repair jobs land between $350 and $2,400. A single pickup-stick repair sits near the bottom; a multi-panel rebuild with new footings sits near the top. Here’s a line-item look at the pieces that make up that range.
| Line item | Typical range |
|---|---|
| Minor pickup / board replacement | $350 – $900 |
| Full panel replacement (per section) | $400 – $1,100 |
| Post and footing replacement (each) | $150 – $450 |
| Gate realign and new hardware | $250 – $600 |
| Multi-section rebuild | $1,200 – $2,400 |
What moves a Garland job to the high end: the number of posts needing new concrete, whether the failure sits in an alley-accessed backyard where equipment can’t reach, and whether the material is a discontinued line that has to be swapped for a close match. What’s included in every written estimate: haul-away, new footings where needed, hardware, and cleanup. What typically isn’t included: replacing a run that’s failing everywhere (that’s a project, not a repair) or pulling a permit for a repair that falls under the threshold. We’ll tell you upfront which side of that line you’re on.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland’s building stock splits sharply by decade, and that split tells us a lot before we even walk the property. Around the older core in ZIPs 75040, 75041, and 75042, you’re working on mid-century ranch lots where fences have been patched and re-patched for 50 years, and the post footings are usually the weak point. Those original 1950s and 60s slabs on Blackland Prairie clay move seasonally, and that movement is what slowly heaves fence lines and cracks gate posts. Out toward the newer master-planned additions, the failures tend to be storm-driven, not age-driven. Hail and high wind events lift pickets and lean whole runs, and the pick is usually to replace the section rather than patch it. Garland runs its own permitting and inspections rather than deferring to Dallas County, so if a repair crosses into rebuild territory we handle the permit side. If the work touches an alley-load yard or a tight setback, we plan access on the estimate visit so the crew isn’t solving it on day 1.
When a repair grows into a replacement, it’s part of a full Fence Installation in Garland project, and that’s a different conversation. If the project is bigger than a fence, homeowners often pair this with an ADU Design & Permitting in Garland or a Garage Conversion ADU in Garland, and we can scope that together. Looking to understand the broader picture? Our Fence Installation service hub covers everything we do.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Fence Repair in Garland

Most repair jobs are done in a single visit once materials are on site. A small pickup fix takes a few hours. A multi-post rebuild with new footings runs two to three days because of concrete cure time. Call (888) 426-8078 for an exact schedule after we see the property.
Repair work that stays within existing footprint usually doesn’t need a permit. Once a repair crosses into a full rebuild or a height change, permitting may apply, and we’ll tell you straight on the estimate which side you’re on. We handle the permit side when it’s needed.
Yes, and that’s often the right call. We pay per section, not per job, and we’ll patch what can be patched rather than push a full replacement. If the failures are everywhere, we’ll say so and quote a replacement instead of chasing repairs.
Most repairs land between $350 and $2,400, with the biggest variable being whether a rotted post needs a new concrete footing. Call (888) 426-8078 for an exact quote. Estimates are free and the price you see is the price you pay.
Every repair we do carries the 730-Day Done Right Promise. If the workmanship fails inside that window, we make it right. The clock starts on the day we finish and you sign off.
Get Your Fence Repair Priced in Garland
Call (888) 426-8078 to schedule a free on-site estimate for fence repair in Garland. A live person answers around the clock, so you’re not waiting for a callback. We’ll walk the fence with you, find what’s actually broken, and hand you a written line-item quote with no surprises. One visit, one number, and a guarantee that goes the distance.
Written by the team at Groundwork Construction Co.












